Description
Feature name |
FriendsAndFamily |
|---|---|
Applicable contexts |
|
SAS Support |
No * Diameter Mediation Service |
Prerequisite features |
Subscriber Data Lookup Feature
The Friends and Family (FnF) feature sets a special OCS tariff code if a subscriber is making a call to a number in their FnF list. If the other party’s number is in the FnF list, Sentinel will send the configured FnF tariff code (=rating group) while performing charging to OCS. The subscriber for the call type will have been determined using the SS7 Subscriber Determination Feature. When the MSC triggers Sentinel, the FnF list is retrieved for the subscriber. The number to check in the FnF list for the subscriber is shown in the table below:
| Call type | Number to check against FnF list |
|---|---|
MOC |
CalledPartyBCDNumber |
MTC |
CallingPartyNumber |
MFC |
CalledPartyNumber |
NetworkInitiated(Callback) |
Leg #4 Address |
Emergency |
N/A |
MOSMS |
DestinationSubscriberNumber |
In all cases the normalized number will be used for the check.
It is expected that a subscriber’s Friends and Family list will be limited to a small number (such as 5). No logic will be implemented in the Profile/Database or Feature to enforce this limit. Any limit required by the operator will be enforced by the system provisioning the feature.
Any errors encountered during the execution of this feature, such as configuration errors or missing subscriber data, will have no effect on the call. No tariff will be set. The call will be allowed to proceed with other features.
Session State inputs and outputs
Inputs
| Name | Type | Format | Description | Behaviour if null/invalid |
|---|---|---|---|---|
SentinelSelectionKey |
com.opencloud.sentinel.common.SentinelSelectionKey |
selection key (for example, |
For selecting configuration data |
Runtime exception handled by the feature runner |
FriendsAndFamilyEnabled |
Boolean |
true or false |
Indicates whether Friends and Family is enabled for this subscriber |
Runtime exception handled by the feature runner |
InitialDPArg |
com.opencloud.slee.resources.cgin.cap_v1.CAP1InitialDPArg |
InitialDP which triggered this session if it is a call — may be null if sms |
If SessionType is call, Report featureCannotStart, featureHasFinished |
|
InitialDPSMSArg |
com.opencloud.slee.resources.cgin.cap_v3.CAP3InitialDPSMSArg |
InitialDPSMS which triggered this session if it is an sms — may be null if call |
If SessionType is sms, Report featureCannotStart, featureHasFinished |
|
CallType |
com.opencloud.sentinel.common.CallType |
One of: MobileOriginating, MobileTerminating, MobileForwarded, NetworkInitiated, EmergencyCall |
Calltype used for determining which party number is the other party address |
Report featureCannotStart, featureHasFinished |
SessionType |
com.opencloud.sentinel.common.SessionType |
One of: call, sms |
Decide whether to inspect InitialDPSMSArg or InitialDPArg session state field when determining other party address |
Runtime exception handled by the feature runner |
FriendsAndFamilyList |
String[] |
Array of addresses |
List of friends and family numbers |
Set IsFriendsAndFamilyCall session state field to false |
Outputs
| Name | Type | Format | Description |
|---|---|---|---|
IsFriendsAndFamilyCall |
Boolean |
true or false |
Indicates whether this session is a friends and family call |
RatingGroup |
Long |
May be null if IsFriendsAndFamilyCall is false or FNF analysis failed |
ID of the selected rating group |
Error scenarios
| Scenario | Handling |
|---|---|
Sessionstate CallType is null |
Report featureCannotStart |
Other Party address could not be determined |
Report featureIssuedWarning |
Feature responses
| Response | Reason |
|---|---|
featureCannotStart |
Call type is not set in the session state |
featureIssuedWarning |
OtherPartyAddress has not been set |
featureHasFinished |
feature has finished |
OCS interface
In the case of Diameter Ro, a proprietary AVP will be set to indicate the FnF tariff code to the OCS. This will be determined as part of the vendor-specific integration requirements for the OCS.
Configuration
Friends and Family feature general configuration parameters
| Parameter | Type | Description |
|---|---|---|
LookupMethod |
LookupTypeEnum |
The method to be used to lookup the zone; one of: [profile,dbQuery] |
RatingGroup |
Long |
General Rating Group for FnF |
Subscriber FriendsAndFamily data (determined by, for example, the SubscriberDataLookup feature)
| Parameter | Type | Values |
|---|---|---|
FriendsAndFamilyEnabled |
Boolean |
true when HomeZone feature is activated for this subscriber. See Friends and Family Feature. |
FriendsAndFamilyList |
String[] |
list of numbers in normalized format (for example, 6421678956,6421345444,6421343333) |
The Friends and Family list is provisioned in normalized format, such as:
-
6421678956
-
6492324856
-
64800123456 (0800 123456)
Configuration profile naming
| Configuration Profile Table Name | Description | Profile Naming |
|---|---|---|
FriendsAndFamilyFeatureConfigProfileTable |
Selection of database implementation and rating group for the feature |
SentinelSelectionKey (for example, |
Provisioning interfaces
The feature is provisioned using the web interface.
