peers list

Connection configuration.

Warning

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

List Structure

id string
remote-ips list
   node-index int16
   ips list ipv4-address-no-zone
port port-number
state-maintenance-role enumeration
conn-type enumeration
is-ipsp boolean
asp-id uint32
application-servers list
   as-id string
   daud-on-asp-ac boolean

The key is id.

id

Unique connection identifier.

Warning

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

This node is mandatory.

Type string

Value

a string

remote-ips list

Remote IP configuration to connect this SGC cluster to this remote peer.

Warning

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

Must contain at least 1 element.

List Structure

node-index int16
ips list ipv4-address-no-zone

The key is node-index.

node-index

The index of the SMO node that hosts the SGC that will be connected to this IP set. '1' is the first SMO node, '2' is the second, and so on. '-1' indicates that all SGC nodes in the cluster will use this remote IP set.

Warning

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

Type int16

Value

a number in the range -1, 1 or more

ips list

The remote IP address(es) that belong to this IP set.

Warning

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

Must contain at least 1 element.

Type List of ipv4-address-no-zone

Description

An IPv4 address without a zone index.

See RFC 6991 for full details.

Values

a string with length 0 or more matching [0-9\.]*

port

The remote port for this M3UA association.

Warning

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

Type port-number

Description

The port-number type represents a 16-bit port number of an Internet transport-layer protocol such as UDP, TCP, DCCP, or SCTP.

See RFC 6991 for full details.

Value

a number in the range 0 or more

Default value

2905

state-maintenance-role

The role to perform in M3UA state maintenance.

Warning

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

Type enumeration

Value

one of the following

Value Description

active

The SGC takes an active role in M3UA state maintenance.

passive

The SGC takes a passive role in M3UA state maintenance.

Default value

'active'

conn-type

The connection type to establish: client or server.

Warning

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

Type enumeration

Value

one of the following

Value Description

client

The SGC connects to the remote peer.

server

The SGC waits for a connection from the remote peer.

Default value

'client'

is-ipsp

true if the SGC is an IPSP, otherwise false.

Warning

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

Type boolean

Value

'true' or 'false'

Default value

true

asp-id

The ASP identifier to use in ASP-UP/DOWN messages.

Warning

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

Type uint32

Value

a number in the range 0 or more

application-servers list

The application servers to which this connection belongs.

Warning

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

Must contain at least 1 element.

List Structure

as-id string
daud-on-asp-ac boolean

The key is as-id.

as-id

The AS to which this connection belongs, as identified by that application server’s id field.

Warning

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

Type string

Value

a string

daud-on-asp-ac

Send DAUD when the ASP goes ACTIVE in this AS.

Warning

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

Type boolean

Value

'true' or 'false'

Default value

true

application-servers list

Application server configuration.

Warning

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

List Structure

The key is id.

id

Uniquely identifies this list entry.

Not referred to anywhere else in the configuration. Any unique value is permitted.

Warning

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

This node is mandatory.

Type string

Value

a string

traffic-maintenance-role

The traffic-maintenance role to assume in this application server.

Warning

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

Type enumeration

Value

one of the following

Value Description

active

Assume an active traffic-maintenance role.

passive

Assume a passive traffic-maintenance role.

Default value

'active'

routing-context

The routing context of this application server. No value specified means null.

Warning

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

Type uint32

Value

a number in the range 0 or more

routes

The routing configuration for this application server.

default-priority

The default priority to apply to any routes in this application server where a specific priority has not been configured.

Warning

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

This node is mandatory.

Type uint8

Value

a number in the range 0 or more

dpc-ids list

A list of DPCs that may be accessible from this application server.

Warning

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

Must contain at least 1 element.

List Structure

id string
priority uint8

The key is id.

id

The DPC identifier applicable to this route.

Warning

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

This node is mandatory.

Type string

Value

a string

priority

This DPC’s priority. Overrides any value configured in ../default-priority

Warning

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

Type uint8

Value

a number in the range 0 or more

precond-ssns list

This application server will not become active until there is at least one connected TCAP stack for each SSN specified here.

Warning

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

Type List of uint8

Values

a number in the range 0 or more

dpcs list

Configured DPCs.

Warning

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

List Structure

id string
dpc ss7-point-code-type
network-appearance uint8
muss uint8
mss uint8
pudt enumeration

The key is id.

id

An identifier used to reference this DPC from an application server’s routing configuration.

Warning

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

This node is mandatory.

Type string

Value

a string

dpc

The destination point code.

Warning

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

This node is mandatory.

Type ss7-point-code-type

Description

A type representing an SS7 point code. When ANSI variant is in use, specify this in network-cluster-member format, such as 1-2-3, where each element is between 0 and 255. When ITU variant is in use, specify this as an integer between 0 and 16383. Note that for ITU you will need to quote the integer, as this field takes a string rather than an integer.

Value

a string with length 0 or more matching (([0-2]?[0-9]?[0-9]-){2}[0-2]?[0-9]?[0-9])|([0-1]?[0-9]{1,4})

network-appearance

The network appearance.

Absent means null. 0 and null have different meanings in the network.

Warning

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

Type uint8

Value

a number in the range 0 or more

muss

The MUSS.

Warning

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

Type uint8

Value

a number in the range 0 or more

mss

The MSS.

Warning

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

Type uint8

Value

a number in the range 0 or more

pudt

The preferred unitdata message type.

Warning

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

Type enumeration

Value

one of the following

Value Description

UDT

Use UDT messages where possible.

XUDT

Use XUDT messages even if the data would fit within a UDT message.

Default value

'UDT'

cpcs list

Notify the specified destination point code if the local SSN status changes.

Warning

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

List Structure

dpc ss7-point-code-type
ssns list uint8

The key is dpc.

dpc

The destination point code to inform if the monitored SSN changes state.

Warning

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

This node is mandatory.

Type ss7-point-code-type

Description

A type representing an SS7 point code. When ANSI variant is in use, specify this in network-cluster-member format, such as 1-2-3, where each element is between 0 and 255. When ITU variant is in use, specify this as an integer between 0 and 16383. Note that for ITU you will need to quote the integer, as this field takes a string rather than an integer.

Value

a string with length 0 or more matching (([0-2]?[0-9]?[0-9]-){2}[0-2]?[0-9]?[0-9])|([0-1]?[0-9]{1,4})

ssns list

The local SSNs to monitor.

Warning

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

Must contain at least 1 element.

Type List of uint8

Values

a number in the range 0 or more

Previous page Next page
Rhino VoLTE TAS Version 4.1