DetermineRoamingFromHlr is responsible for reading subscriber location data from the HLR and writing it into Sentinel session state variable fields.

The data it reads from the HLR is accessed through the AnyTimeInterrogation MAP operation. The Application Context used is anyTimeInfoEnquiryContext_v3_ac

Feature cheat sheet

B2BUA Instance Originating / Terminating Point(s) in Session Plan Network Operator Data Subscriber Data Stateful or Stateless POJO Feature or SBB Feature Other notes

Both or either of MMTEL or SCC.

Originating, Forwarding, and Terminating

SipAccess_SessionCheck

Yes

Yes

Stateless

POJO

Prerequisite features

  • SubscriberDetermination

  • FetchCMSISDN

Source Code

This feature’s source code is available in the Sentinel VoLTE SDK in the volte-determine-roaming-from-hlr module pack. It can be viewed by using the create-module command in the SDK with that module pack, for example:

> create-module new-hlr-module opencloud#volte-determine-roaming-from-hlr#volte/2.7.0;2.7.0.0

This command will prompt you for information needed to create the new module; once completed the original source for the feature can be found in the new module.

The module-pack consists of a single module, volte-determine-roaming-from-hlr, containing the feature’s code. It does rely on the volte-map-event-handler which contains the shared event handler for MAP features and also publishes a module pack, however the event handler will not require modification unless a new feature name is introduced.

Session state input variables

Attribute Name Type
Subscriber

String

CMISDN

String

Session state output variables

Attribute Name Type
Description

RoamingStatus

Enum

UNKNOWN, NATIONAL or INTERNATIONAL

RoamingIndicator

boolean

Note: The default values for both RoamingStatus and RoamingIndicator are UNKNOWN and false respectively. If this feature is unable to determine the roaming status for any reason, it will leave the pre-set values.

Configuration

The feature uses configuration data from both the HLR CGIN MAP Configuration and SIP Sentinel Configuration.

Statistics

DetermineRoamingFromHlr statistics are tracked by the DetermineRoamingFromHlr feature and can be found under the following parameter set:
SLEE-Usage ▶ volte.sentinel.sip service ID ▶ volte.sentinel.sip SBB ID ▶ DetermineRoamingFromHlr.

Name Type Description
Started

Counter

Incremented each time the feature runs

FailedToStart

Counter

Incremented when sentinel VoLTE encounters an error while attempting to start the feature

IssuedWarning

Counter

Incremented when a non-fatal problem is encountered and the feature issues a warning

FailedDuringExecution

Counter

Incremented when a fatal problem is encountered and the feature cannot execute correctly

TimedOut

Counter

Incremented when the feature takes too long to complete and Sentinel VoLTE aborts execution

RequestSent

Counter

Incremented when the feature receives subscriber data from the HLR

RequestSuccessful

Counter

Incremented after the feature successfully processes the data it received, and loads it into session state fields

RequestFailed

Counter

Incremented when absent configuration data prevents the feature from running

ResponseLatency

Sampled

Records elapsed time between sending the request to the HLR and getting a response (in milliseconds).

InternationalRoaming

Counter

Incremented when the feature determines that the subscriber is roaming internationally

NotRoaming

Counter

Incremented when the feature determines that the subscriber is not roaming

NationalRoaming

Counter

Incremented when the feature determines that the subscriber is national roaming

RoamingDataMissingFromHlrResponse

Counter

Incremented whenever an ATI result comes back from Hlr with missing or invalid location information

DialogOpenRefuseEvent

Counter

Incremented whenever the ATI fails due to a dialog open refuse

DialogUserAbortEvent

Counter

Incremented whenever the ATI fails due to a dialog user abort

DialogProviderAbortEvent

Counter

Incremented whenever the ATI fails due to a dialog provider abort

OperationErrorEvent

Counter

Incremented whenever the ATI fails due to an operation error

Behaviour

This feature uses the CGIN MAP RA to query the HLR with an ATI for subscriber location information.

Each time the feature is invoked, it checks the call type and determines the subscriber number that it should use to query the HLR.

The feature attempts to extract "phone number digits" from the CMSISDN session state field set by FetchCMSISDN, and if it cannot, from the Subscriber field set by SubscriberDetermination. If the feature cannot form a MSISDN it raises a Feature Error and finishes execution.

The feature then requests subscriber location info by sending a AnyTimeInterrogation request to the configured HLR.

In order to form the ATI request the feature:

  1. sets the GSM SCF address to the SentinelSCCPAddress configuration value

  2. sets the destination SCCP address to the HlrSCCPAddress configuration value

  3. sets the RequestedInfo indicator field to request Location Information

If a successful result is received, it retrieves location information from the ATI result. The location information can be in either of the CellGlobalIdOrServiceAreaIdFixedLength or LaiFixedLength fields. If neither field is present, the feature increments the RoamingDataMissingFromHlrResponse stat and finishes.

If the location information is found, the MCC and MNC are compared against the configured home network information to determine whether the subscriber is roaming or not. The RoamingStatus and RoamingIndicator session state fields are then set accordingly. Their default values in the case of incomplete information or feature failure are UNKNOWN and false respectively.

Previous page Next page
Sentinel VoLTE Version 2.7.0