# This file contains configuration for the OCSS7 SGC.
deployment-config:sgc:
sgcenv:
# The port to bind to for JMX service, used by the CLI and MXBeans.
jmx-port: 55555
hazelcast:
# If omitted, backup-count defaults to N-1, where N is number of SMO nodes.
# Don't uncomment, unless support instructs you to.
# backup-count: 1
password: xxxxxxxx
# Only change SGC properties if support instructs you to
#sgc-properties:
# properties:
# - name: com.cts.ss7.shutdown.gracefulWait
# value: '30000'
m3ua:
# The default port to bind for this local M3UA endpoint.
local-port: 2905
# # Normally each node in an SGC cluster will use the same port for its local M3UA endpoint.
# # However, some configurations require that each node uses a different local port.
# # Uncomment and configure if required. For 'node-index', '1' is the first SMO node, '2' the
# # second and so on. Any nodes not configured here will use the global default 'local-port'
# # above.
# per-node-local-port:
# - node-index: 2
# local-port: 2906
# - node-index: 3
# local-port: 2907
# The SCCP variant to configure this SGC to use.
# Can be either: ITU or ANSI
sccp-variant: ITU
# This cluster's signaling point code.
# If specifying a single integer (for ITU point codes), be sure to quote it
# along with all other point codes in this file.
point-code: "5"
remote:
peers:
- id: 'STP-1'
remote-ips:
# The index of the SMO node that hosts the SGC that will be
# connected to this IP set. '1' is the first SMO node,
# '2' is the second, and so on. '-1' indicates that all
# SGC nodes in the cluster will use this remote IP set.
- node-index: -1
ips:
- 10.14.144.71
- 10.14.144.134
# The remote port for this M3UA association.
port: 2906
# The AS to which this connection belongs.
application-servers:
- as-id: 'NN-AS'
- id: 'STP-2'
remote-ips:
- node-index: -1
ips:
- 10.14.144.81
- 10.14.144.144
port: 2906
application-servers:
- as-id: 'NN-AS'
application-servers:
- id: 'NN-AS'
routes:
default-priority: 5
# The DPC identifiers applicable to this route.
dpc-ids:
- id: 'alias-2-233-3'
- id: 'NN-AS2'
routes:
default-priority: 0
# The DPC identifiers applicable to this route.
dpc-ids:
- id: 'alias-2-233-3'
precond-ssns:
- 2
- 3
dpcs:
- id: 'alias-2-233-3'
dpc: "5963"
# maximum unsegmented SCCP message size to send to this
# destination as a single unsegmented message
muss: 252
# maximum user data length per segment to send to this
# destination
mss: 245
cpcs:
- dpc: "5963"
# The local SSNs to monitor.
ssns:
- 8
- 146
global-title:
# For this example:
# Match everything and send to the single alias point code.
outbound:
matchers:
defaults:
natofaddr: 0
numplan: 7
trtype: 129
rules:
- id: '1'
is-prefix: false
translations:
- 'all'
translations:
- id: 'all'
dpc: "5963"
priority: 5
# # Example rewriter would take all translation rules that
# # use the 'example' rewriter, replace the digits with
# # '123456', and set translated messages to route on the SSN.
# rewriters:
# - id: 'example'
# addrinfo: '123456'
# route-on: 'SSN'
# Inbound translation has only matching rules.
# If an address is matched, it is sent to the
# configured SSN
inbound:
- id: 'to-sentinel-volte-gsm'
addrinfo: '123456'
is-prefix: false
natofaddr: 4
numplan: 1
trtype: 0
ssn: 146
- id: 'to-sentinel-volte-cdma'
addrinfo: '987654'
is-prefix: false
trtype: 0
ssn: 146
