Create a Socket Appender

createsocketappender <appenderName> <host> <port> [-bufferedIO <true|false>]
[-bufferSize size] [-connectTimeoutMillis <timeout(ms)>] [-immediateFail
<true|false>] [-immediateFlush <true|false>] [-protocol <protocol>]
[-reconnectionDelayMillis <delay(ms)>] [-keyStoreLocation <location>]
[-keyStorePassword <password>] [-trustStoreLocation <location>]
[-trustStorePassword <password>] [-ignoreExceptions <true|false>]
  Description
    The SocketAppender is an appender that writes its output to a remote destination
    specified by a host and port. The data can be sent over either TCP or UDP and
    the default format of the data is to send a Serialized LogEvent.
  Required Arguments
    appenderName  The name of the Appender.
    host  The name or address of the system that is listening for log events.
    port  The port on the host that is listening for log events.
  Options
    -bufferedIO  When true, records will be written to a buffer and the data will be
    written to disk when the buffer is full or, if immediateFlush is set, when the
    record is written. File locking cannot be used with bufferedIO. The default is
    true.
    -bufferSize  The buffer size. The default is 8192 bytes.
    -connectTimeoutMillis  The connect timeout in milliseconds. The default is 0
    (infinite timeout).
    -immediateFail  When set to true, log events will not wait to try to reconnect
    and will fail immediately if the socket is not available.
    -immediateFlush  When true, each write will be followed by a flush. This will
    guarantee the data is written to disk but could impact performance. The default
    is true.
    -protocol  'TCP' (default), 'SSL' or 'UDP'.
    -reconnectionDelayMillis  If set to a value greater than 0, after an error there
    will be an attempt to reconnect to the server after waiting the specified number
    of milliseconds.
    -keyStoreLocation  The location of the keystore for SSL connections.
    -keyStorePassword  The password of the keystore for SSL connections.
    -trustStoreLocation  The location of the truststore for SSL connections.
    -trustStorePassword  The password of the truststore for SSL connections.
    -ignoreExceptions  When true, exceptions encountered while appending events will
    be internally logged and then ignored. The default is true.

$ ./rhino-console createsocketappender myappender localhost 12000
Done.

createsyslogappender <appenderName> <host> <port> <facility> [-advertise
<true|false>] [-appName <name>] [-charset <name>] [-connectTimeoutMillis
<timeout(ms)>] [-enterpriseNumber <number>] [-format <name>] [-id <id>]
[-immediateFail <true|false>] [-immediateFlush <true|false>] [-includeMDC
<true|false>] [-mdcExcludes <key1,key2...>] [-mdcId <id>] [-mdcIncludes
<key1,key2...>] [-mdcRequired <key1,key2...>] [-mdcPrefix <prefix>] [-messageId
<msgid>] [-newLine <true|false>] [-reconnectionDelayMillis <delay(ms)>]
[-keyStoreLocation <location>] [-keyStorePassword <password>]
[-trustStoreLocation <location>] [-trustStorePassword <password>]
[-ignoreExceptions <true|false>] [-protocol <protocol>]
  Description
    The SyslogAppender is a SocketAppender that writes its output to a remote
    destination specified by a host and port in a format that conforms with either
    the BSD Syslog format or the RFC 5424 format.
  Required Arguments
    appenderName  The name of the Appender.
    host  The name or address of the system that is listening for log events.
    port  The port on the host that is listening for log events.
    facility  The facility is used to try to classify the message. The facility
    option must be set to one of 'KERN', 'USER', 'MAIL', 'DAEMON', 'AUTH', 'SYSLOG',
    'LPR', 'NEWS', 'UUCP', 'CRON', 'AUTHPRIV', 'FTP', 'NTP', 'AUDIT', 'ALERT',
    'CLOCK', 'LOCAL0', 'LOCAL1', 'LOCAL2', 'LOCAL3', 'LOCAL4', 'LOCAL5', 'LOCAL6',
    or 'LOCAL7'.
  Options
    -advertise  Indicates whether the appender should be advertised.
    -appName  The value to use as the APP-NAME in the RFC 5424 syslog record.
    -charset  The character set to use when converting the syslog String to a byte
    array. The String must be a valid Charset. If not specified, the default system
    Charset will be used.
    -connectTimeoutMillis  The connect timeout in milliseconds. The default is 0
    (infinite timeout).
    -enterpriseNumber  The IANA enterprise number as described in RFC 5424
    -format  If set to 'RFC5424' the data will be formatted in accordance with RFC
    5424. Otherwise, it will be formatted as a BSD Syslog record.
    -id  The default structured data id to use when formatting according to RFC
    5424. If the LogEvent contains a StructuredDataMessage the id from the Message
    will be used instead of this value.
    -immediateFail  When set to true, log events will not wait to try to reconnect
    and will fail immediately if the socket is not available.
    -immediateFlush  When true, each write will be followed by a flush. This will
    guarantee the data is written to disk but could impact performance. The default
    is true.
    -includeMDC  Indicates whether data from the ThreadContextMap will be included
    in the RFC 5424 Syslog record. Defaults to true.
    -mdcExcludes  A comma separated list of mdc keys that should be excluded from
    the LogEvent.
    -mdcId  The id to use for the MDC Structured Data Element.
    -mdcIncludes  A comma separated list of mdc keys that should be included in the
    FlumeEvent.
    -mdcRequired  A comma separated list of mdc keys that must be present in the
    MDC.
    -mdcPrefix  A string that should be prepended to each MDC key in order to
    distinguish it from event attributes
    -messageId  The default value to be used in the MSGID field of RFC 5424 syslog
    records.
    -newLine  If true, a newline will be appended to the end of the syslog record.
    The default is false.
    -reconnectionDelayMillis  If set to a value greater than 0, after an error there
    will be an attempt to reconnect to the server after waiting the specified number
    of milliseconds.
    -keyStoreLocation  The location of the keystore for SSL connections.
    -keyStorePassword  The password of the keystore for SSL connections.
    -trustStoreLocation  The location of the truststore for SSL connections.
    -trustStorePassword  The password of the truststore for SSL connections.
    -ignoreExceptions  When true, exceptions encountered while appending events will
    be internally logged and then ignored. The default is true.
    -protocol  'TCP' (default), 'SSL' or 'UDP'.

$ ./rhino-console createsyslogappender myappender localhost 12000 USER
Done.