Rhino 3.0.0 :: Rhino Administration and Deployment Guide :: Removing the Log Notification Appender

To safely remove the Log Notification Appender, use the following rhino-console commands.

What is the Log Notification Appender?

Introduced in Rhino 2.2, the Log Notification Appender is a log appender that generates SNMP notifications from log messages at or above a specified threshold (by default: WARN).

removeappenderref

Command	removeappenderref <logKey> <appenderName> Description Removes an appender for a log key. Required Arguments logKey The log key of the logger. appenderName The name of the Appender.
Example	[Rhino@localhost (#40)] removeappenderref root LogNotification Done.

Command

removeappenderref <logKey> <appenderName>
  Description
    Removes an appender for a log key.
  Required Arguments
    logKey  The log key of the logger.
    appenderName  The name of the Appender.

Example

[Rhino@localhost (#40)] removeappenderref root LogNotification
Done.

Specific log keys and levels

If you only want notifications from specific log keys, after removing the root appender reference, add one for that specific log key.

For a different notification-generation log level (such as ERROR or FATAL), use the setAppenderThreshold console command on the LogNotification log appender.

However, we strongly recommend keeping the Log Notification Appender configured at WARN level or above.

Metaswitch does not support Log Notification Appender configurations that cause excessive notification generation (such as INFO or DEBUG level).

Previous page Next page