|
Note that one SIMPL VM can be used to deploy multiple node types. Thus, this step only needs to be performed once for all node types. |
|
The supported versions of the SIMPL VM are |
Planning for the procedure
Background knowledge
This procedure assumes that:
-
you are using a supported VMware vSphere version, as described in the 'VMware requirements' section of the SIMPL VM Documentation
-
you are installing into an existing VMware vSphere deployment which has pre-configured networks and VLANs; this procedure does not cover setting up a VMware vSphere deployment from scratch
-
you know the IP networking information (IP address, subnet mask in CIDR notation, and default gateway) for the SIMPL VM.
Reserve maintenance period
This procedure does not require a maintenance period. However, if you are integrating into a live network, we recommend that you implement measures to mitigate any unforeseen events.
Tools and access
You must have access to a local computer (referred to in this procedure as the local computer) with a network connection and access to the vSphere client.
This page references an external document: the SIMPL VM Documentation. Ensure you have a copy available before proceeding.
Installation Questions
| Question | More information |
|---|---|
Do you have the correct SIMPL VM OVA? |
All SIMPL VM virtual appliances use the naming convention - |
Do you know the IP address that you intend to give to the SIMPL VM? |
The SIMPL VM requires one IP address, for management traffic. |
Method of procedure
Deploy and configure the SIMPL VM
Follow the SIMPL VM Documentation on how to deploy the SIMPL VM and set up the configuration.
