Feature cheat sheet

Feature Name Network Operator Data Used in PlanId(s) Stateful or Stateless POJO Feature or SBB Feature

IPSMGWMOSubmitReport

Yes

MOFSM

Stateless

POJO

Statistics

MOSubmitReport statistics are tracked by the sentinel.ipsmgw SBB and can be found under the following parameter set in REM:
SLEE-Usage → sentinel.ipsmgw service → sentinel.ipsmgw SBB → feature → IPSMGWMOSubmitReport
or with rhino-stats:
"SLEE-Usage.Services.ServiceID[name=sentinel.ipsmgw,vendor=OpenCloud,version=4.1].SbbID[name=sentinel.ipsmgw,vendor=OpenCloud,version=4.1].feature.IPSMGWMOSubmitReport"

Name Description
ErrorSendingMessage

Incremented when the feature fails to send SIP MESSAGE containing smsSubmitReport

SentAck

Incremented when the feature sends one RP-ACK in the SIP MESSAGE

SentError

Incremented when the feature sends one RP-ERROR in the SIP MESSAGE

ReceivedOk

Incremented when the feature receives the successful response for the MESSAGE request

ReceivedError

Incremented when the feature receives non-successful response for the MESSAGE request

Configuration

The feature is configured with configuration scoped according to a Sentinel Selection Key. The Profile Table used to hold feature configuration is Shared Configuration Profile. The following attributes are used:

Attributes Type Meaning
ICSCFURI

String

The I-CSCF SIP URI that will be used to route outbound SIP MESSAGE requests (see SIP Transports and Routing)

Behaviour

The feature is triggered after the MO Submission feature has finished.

The feature checks session state to determine the outcome of MO Submission to the SMSC.

In the case that MO Submission was successful it formulates a SIP Message request containing an RP-ACK towards the initiating UE. In the case that there were parsing or other issues in MO Submission it formulates a SIP Message request containing an RP-ERROR towards the initiating UE (SM-over-IP sender).

The details of these requests are as follows.

Generic header setting

Regardless of whether or not the Submit Report towards the UE (SM-over-IP sender) indicates a successful or failed submission attempt the following headers are set

Header Setting or manipulation

Request URI

Contains a public user identity of the SM-over-IP sender

Route header

Set to the I-CSCF URI, with the loose routing parameter added

Content-Type

set to "application/vnd.3gpp.sms"

It reads the P-Asserted-Identity, P-Preferred-Identity and From headers of the original SMS over IP Message request in order to set the Request URI of the Submit Report.

Creation of an RP-ACK Submit report

In addition to the generic header setting, an RP-ACK Submit report sets headers as follows

Header Setting or manipulation

P-Asserted-Identity

Contains the SIP URI of the IP-SM-GW

Request-Disposition

set to "fork"

Message body

Contains an RP-ACK in content transfer encoding of type "binary"

The RP Message Reference in the RP-ACK matches the Message Reference in the RP-Submit.

mosubmitreport ack

Creation of an RP-ERROR Submit report

In addition to the generic header setting, an RP-ERROR Submit report sets the body of the SIP Message request to contain an RP-ERROR, with content transfer encoding of type "binary".

The RP Message Reference in the RP-ERROR matches the Message Reference in the RP-Submit.

The setting of the RP-ERROR’s RPCause value is as follows

Source error cause RP Error Cause value

Could not parse the SMS body from the SM-over-IP sender

PROTOCOL_ERROR

MO Forward SM resulted in TC_UserAbort

NETWORK_OUT_OF_ORDER

MO Forward SM resulted in TC_ProviderAbort

NETWORK_OUT_OF_ORDER

MO Forward SM resulted in an InvokeTimeout

NETWORK_OUT_OF_ORDER

MO Forward SM error MAPErrors.facilityNotSupported

REQUESTED_FACILITY_NOT_IMPLEMENTED

MO Forward SM error MAPErrors.systemFailure

NETWORK_OUT_OF_ORDER

MO Forward SM error MAPErrors.unexpectedDataValue

SEMANTICALLY_INCORRECT_MESSAGE

MO Forward SM error Delivery Failure with Delivery Failure Cause of memoryCapacityExceeded

MEMORY_CAPACITY_EXCEEDED

MO Forward SM error Delivery Failure with Delivery Failure Cause of equipmentProtocolError

PROTOCOL_ERROR

MO Forward SM error Delivery Failure with Delivery Failure Cause of equipmentNotSM_Equipped

REQUESTED_FACILITY_NOT_IMPLEMENTED

MO Forward SM error Delivery Failure with Delivery Failure Cause of unknownServiceCentre

UNASSIGNED_NUMBER

MO Forward SM error Delivery Failure with Delivery Failure Cause of sc_Congestion

CONGESTION

MO Forward SM error Delivery Failure with Delivery Failure Cause of invalidSME_Address

SHORT_MESSAGE_TRANSFER_REJECTED

MO Forward SM error Delivery Failure with Delivery Failure Cause of subscriberNotSC_Subscriber

UNIDENTIFIED_SUBSCRIBER

mosubmitreport error

Session state inputs and outputs

Inputs

Name Type Format Description Behaviour if null/invalid

SentSubmitReport

boolean

N/A

True if the feature has sent a submit report - otherwise the feature will send one if appropriate

N/A

Outputs

Name Type Description

SentSubmitReport

boolean

True if a submit report was sent by the feature

Previous page Next page
Sentinel IP-SM-GW Version 4.1