Rhino VoLTE TAS 4.2 :: Rhino VoLTE TAS Configuration and Management Guide

M3UA configuration.

Context

The context of m3ua within the schema tree is shown. Italicised links are to other pages.

deployment-config:sgc (in sgc-config.yaml)
  m3ua
    local-port
    per-node-local-port list
      node-index
      local-port
    point-code
    sccp-variant
    national
    network-indicator
    remote
    global-title
      outbound
        matchers
        translations list
        rewriters list

local-port

/sgc/m3ua/local-port

The port to bind for this local M3UA endpoint.

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

Type port-number

Description: The port-number type represents a 16-bit port number of an Internet transport-layer protocol such as UDP, TCP, DCCP, or SCTP.

See RFC 6991 for full details.
Value: a number in the range 0 or more
Default value: 2905

per-node-local-port list

/sgc/m3ua/per-node-local-port

Allows the 'local-port' to be overridden on a per-node basis. Only required for deployments where each SGC cluster member needs to have its local M3UA endpoint listen on a different port to the other members.

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

List Structure

node-index int16
local-port port-number

The key is node-index.

node-index

/sgc/m3ua/per-node-local-port/node-index

The index of the node within the cluster. '1' is the first node, '2' is the second, and so on.

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

Type int16

Value: a number in the range 1 or more

local-port

/sgc/m3ua/per-node-local-port/local-port

The port to bind for this node’s local M3UA endpoint.

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

This node is mandatory.

Type port-number

Description: The port-number type represents a 16-bit port number of an Internet transport-layer protocol such as UDP, TCP, DCCP, or SCTP.

See RFC 6991 for full details.
Value: a number in the range 0 or more

point-code

/sgc/m3ua/point-code

This SGC cluster’s signaling point code.

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

This node is mandatory.

Type ss7-point-code-type

Description: A type representing an SS7 point code. When ANSI variant is in use, specify this in network-cluster-member format, such as 1-2-3, where each element is between 0 and 255. When ITU variant is in use, specify this as an integer between 0 and 16383. Note that for ITU you will need to quote the integer, as this field takes a string rather than an integer.
Value: a string with length 0 or more matching (([0-2]?[0-9]?[0-9]-){2}[0-2]?[0-9]?[0-9])|([0-1]?[0-9]{1,4})

sccp-variant

/sgc/m3ua/sccp-variant

The SCCP variant to configure this SGC to use.

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

Type enumeration

Value: one of the following

Value Description

Value	Description
`ITU`	ITU-T SCCP
`ANSI`	ANSI SCCP

ITU

ITU-T SCCP

ANSI

ANSI SCCP

Default value: 'ITU'

national

/sgc/m3ua/national

The value of the 'national indicator' SCCP address indicator bit for SCMG messages sent by this node.

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

Type enumeration

Value: one of the following

Value Description

Value	Description
`AUTO`	Uses the SCCP variant to determine the best `national` value to use for SCMG messages. ITU SCCP implies `INTERNATIONAL` and ANSI SCCP implies `NATIONAL`.
`NATIONAL`	Set the `national` value in SCMG messages to `NATIONAL`.
`INTERNATIONAL`	Set the `national` value in SCMG messages to `INTERNATIONAL`.

AUTO

Uses the SCCP variant to determine the best national value to use for SCMG messages. ITU SCCP implies INTERNATIONAL and ANSI SCCP implies NATIONAL.

NATIONAL

Set the national value in SCMG messages to NATIONAL.

INTERNATIONAL

Set the national value in SCMG messages to INTERNATIONAL.

Default value: 'AUTO'

network-indicator

/sgc/m3ua/network-indicator

The value of the 'network indicator' field in M3UA messages generated by this cluster.

See 'Reconfiguring the SGC' in 'Rhino VoLTE TAS Configuration and Management Guide' for how to activate changes to this value.

Type enumeration

Value: one of the following

Value Description

Value	Description
`INTERNATIONAL`	Set the M3UA 'network indicator' field to the value `INTERNATIONAL`.
`SPARE`	Set the M3UA 'network indicator' field to the value `SPARE`.
`NATIONAL`	Set the M3UA 'network indicator' field to the value `NATIONAL`.
`RESERVED`	Set the M3UA 'network indicator' field to the value `RESERVED`.

INTERNATIONAL

Set the M3UA 'network indicator' field to the value INTERNATIONAL.

SPARE

Set the M3UA 'network indicator' field to the value SPARE.

NATIONAL

Set the M3UA 'network indicator' field to the value NATIONAL.

RESERVED

Set the M3UA 'network indicator' field to the value RESERVED.

Default value: 'INTERNATIONAL'

remote

See remote for details of this node and its descendants.

global-title

See global-title for details of this node and its descendants.

Previous page Next page