This page provides a summary of the statistics defined for Sentinel VoLTE features.
General Features
DetermineChargeMode
DetermineChargeMode statistics are tracked by the sentinel.volte.sip SBB
and can be found under the following parameter set in REM:
SLEE-Usage → sentinel.volte.sip service → sentinel.volte.sip SBB → feature → DetermineChargeMode
or with rhino-stats:
"SLEE-Usage.Services.ServiceID[name=sentinel.volte.sip,vendor=OpenCloud,version=4.0.0].SbbID[name=sentinel.volte.sip,vendor=OpenCloud,version=4.0.0].feature.DetermineChargeMode"
| Name | Description |
|---|---|
Started |
Incremented each time the feature runs |
FailedToStart |
Incremented when a fatal error occurs before feature execution |
IssuedWarning |
Incremented when a non-fatal error occurs during feature execution |
FailedDuringExecution |
Incremented when a fatal error occurs during feature execution |
TimedOut |
Incremented when feature execution does not complete within a reasonable time frame |
MonitorOnly |
Incremented when the feature has set the MonitorCallOnly Session State field to true |
NonMonitorOnly |
Incremented when the feature has set the MonitorCallOnly Session State field to false |
Error |
Incremented when the feature was unable to determine the charge mode |
DetermineInitialLegNames
DetermineInitialLegNames statistics are tracked by the sentinel.volte.sip SBB
and can be found under the following parameter set in REM:
SLEE-Usage → sentinel.volte.sip service → sentinel.volte.sip SBB → feature → DetermineInitialLegNames
or with rhino-stats:
"SLEE-Usage.Services.ServiceID[name=sentinel.volte.sip,vendor=OpenCloud,version=4.0.0].SbbID[name=sentinel.volte.sip,vendor=OpenCloud,version=4.0.0].feature.DetermineInitialLegNames"
| Name | Description |
|---|---|
FeatureStarted |
Incremented each time the feature runs |
FeatureFailedToStart |
Incremented when Sentinel VoLTE encounters an error while attempting to start the feature |
FeatureIssuedWarning |
Incremented when a non-fatal problem is encountered and the feature issues a warning |
FeatureFailedDuringExecution |
Incremented when a fatal problem is encountered and the feature cannot execute correctly |
FeatureTimedOut |
Incremented when the feature takes too long to complete and Sentinel VoLTE aborts execution |
FeatureCallingLegNameSet |
Incremented when calling leg name is found |
FeatureCalledLegNameSet |
Incremented when called leg name is found |
Determine International and Roaming Status
DetermineInternationalAndRoamingStatus statistics are tracked by the volte.sentinel.sip SBB
and can be found under the following parameter set in REM:
SLEE-Usage → volte.sentinel.sip service → volte.sentinel.sip SBB → feature → DetermineInternationalAndRoamingStatus
or with rhino-stats:
"SLEE-Usage.Services.ServiceID[name=volte.sentinel.sip,vendor=OpenCloud,version=4.0.0].SbbID[name=volte.sentinel.sip,vendor=OpenCloud,version=4.0.0].feature.DetermineInternationalAndRoamingStatus"
| Parameter | Type | Description |
|---|---|---|
Started |
Counter |
Incremented each time the feature runs |
FailedToStart |
Counter |
Incremented when a fatal error occurs before feature execution |
IssuedWarning |
Counter |
Incremented when a non-fatal error occurs during feature execution |
FailedDuringExecution |
Counter |
Incremented when a fatal error occurs during feature execution |
TimedOut |
Counter |
Incremented when feature execution does not complete within a reasonable time frame |
VisitedNetworkHeaderFound |
Counter |
Incremented when the requestURI identity is in RegistrationRecords list of public identities. |
AccessNetworkMccFound |
Counter |
Incremented when the mobile-Country-Code is found in the P-Access-Network-Info header. |
DeterminedInternationalUsingAccessNetworkMcc |
Counter |
Incremented when the MCC prefix address list is used to determine whether the call is international. |
DeterminedInternationalUsingVisitedNetworkId |
Counter |
Incremented when the visited-network-id prefix address list is used to determine whether the call is international. |
DeterminedInternationalUsingIsoCC |
Counter |
Incremented when ISO country codes are used to determine whether the call is international. |
CouldNotGetPVisitedNetworkID |
Counter |
Incremented when no visited network ID information could be found. |
HomeNetworkIdSetForNetworkOperatorIsEmpty |
Counter |
Incremented when the Sentinel SIP configuration for the network operator has an empty |
InternationalRoaming |
Counter |
Incremented when the feature determines that the served user is roaming in a foreign country. |
NationalRoaming |
Counter |
Incremented when the feature determines that the served user is roaming in their home country. |
NotRoaming |
Counter |
Incremented when the feature determines that the served user is on their home network. |
UnknownRoaming |
Counter |
Incremented when the feature is unable to determine the served user’s roaming status. |
AddressNotMinimumLength |
Counter |
Incremented when destination address is less than the configured minimum length |
AddressOnSkipList |
Counter |
Incremented when destination address matches an entry in the |
StatusDeterminedFromHeader |
Counter |
Incremented when the roaming status is determined from a OC-Roaming-Status header on the incoming request. |
NoActionRequired |
Counter |
Incremented when the feature determines that it does not need to do anything for the current invocation. |
DetermineVoltePlanId
DetermineVoltePlanId statistics are tracked by the sentinel.volte.sip SBB
and can be found under the following parameter set in REM:
SLEE-Usage → sentinel.volte.sip service → sentinel.volte.sip SBB → feature → DetermineVoltePlanId
or with rhino-stats:
"SLEE-Usage.Services.ServiceID[name=sentinel.volte.sip,vendor=OpenCloud,version=4.0.0].SbbID[name=sentinel.volte.sip,vendor=OpenCloud,version=4.0.0].feature.DetermineVoltePlanId"
| Name | Type | Description |
|---|---|---|
Started |
Counter |
Incremented each time the feature runs |
FailedToStart |
Counter |
Incremented when a fatal error occurs before feature execution |
IssuedWarning |
Counter |
Incremented when a non-fatal error occurs during feature execution |
FailedDuringExecution |
Counter |
Incremented when a fatal error occurs during feature execution |
TimedOut |
Counter |
Incremented when feature execution does not complete within a reasonable time frame |
NoPlanSelected |
Counter |
Incremented when the feature fails to select an appropriate plan ID |
MmtelOriginatingPlanSelected |
Counter |
Incremented when the feature selects the plan ID as “mmtel-orig” |
MmtelTerminatingPlanSelected |
Counter |
Incremented when the feature selects the plan ID as “mmtel-term” |
MmtelConferencingPlanSelected |
Counter |
Incremented when the feature selects the plan ID as “mmtel-conf” |
SccOriginatingPlanSelected |
Counter |
Incremented when the feature selects the plan ID as “scc-orig” |
SccTerminatingPlanSelected |
Counter |
Incremented when the feature selects the plan ID as “scc-term” |
SccTerminatingTadsOnlyPlanSelected |
Counter |
Incremented when the feature selects the plan ID as “scc-term-tads” |
SccTerminatingAnchorOnlyPlanSelected |
Counter |
Incremented when the feature selects the plan ID as “scc-term-anchor” |
SccReoriginationPlanSelected |
Counter |
Incremented when the feature selects the plan ID as “scc-reorigination” |
SccAccessTransferPlanSelected |
Counter |
Incremented when the feature selects the plan ID as “scc-access-transfer” |
ConferenceConfigurationNotFound |
Counter |
Incremented when the feature is unable to find a valid conference PSI from configuration profiles |
PlanIDAlreadySet |
Counter |
Incremented when the feature detects that a plan ID has already been selected |
IMSIDLookup
IMSIDLookup statistics are tracked by the IMSIDLookup SBB and can be found under the following parameter set:
SLEE-Usage ▶ sentinel.volte.sip service ID ▶ IMSIDLookup SBB ID.
| Name | Type | Description |
|---|---|---|
Invoked |
Counter |
Incremented when the feature runs. |
FeatureError |
Counter |
Incremented when a fatal error occurs during feature execution. |
NoSubscriberSpecified |
Counter |
Incremented when the feature is unable to determine which subscriber to retrieve IDs for. |
IMSIDRetrieveSuccess |
Counter |
Incremented when IDs are successfully retrieved and decoded. |
IMSIDRetrieveFail |
Counter |
Incremented when ID retrieval or decoding fails. |
CacheQueried |
Counter |
Incremented when a query is made to the Sh Cache Microservice. |
CacheIndicatedQuerySuccess |
Counter |
Incremented when a success response is received from the Sh Cache Microservice. |
CacheIndicatedQueryFailure |
Counter |
Incremented when a failure response is received from the Sh Cache Microservice. |
SubscriberNotRegistered |
Counter |
Incremented when the searched subscriber is not present in the Sh Cache Microservice or has no valid registration. |
RegistrationOutOfSync |
Counter |
Incremented when the searched subscriber information is not consistent between the network and the Sh Cache Microservice. |
ResponseLatency |
Sampled |
Records elapsed time between requesting data from the Sh Cache Microservice and getting a response (in milliseconds). |
IMSIDLookupFromCassandraSIP
IMSIDLookupFromCassandraSIP statistics are tracked by the IMSIDLookupFromCassandraSIP feature and can be found under the following parameter set:
SLEE-Usage ▶ sentinel.volte.sip service ID ▶ sentinel.volte.sip SBB ID ▶ IMSIDLookupFromCassandraSIP.
| Name | Type | Description |
|---|---|---|
Started |
Counter |
Incremented when the feature runs. |
FailedToStart |
Counter |
Incremented when Sentinel VoLTE encounters an error while attempting to start the feature. |
IssuedWarning |
Counter |
Incremented when a non-fatal problem is encountered and the feature issues a warning. |
FailedDuringExecution |
Counter |
Incremented when a fatal problem is encountered and the feature cannot execute correctly. |
FeatureError |
Counter |
Incremented when a feature error occurs. |
TimedOut |
Counter |
Incremented when the feature takes too long to complete and Sentinel VoLTE aborts execution. |
NoSubscriberSpecified |
Counter |
Incremented when the feature is unable to determine which subscriber to retrieve IDs for. |
IMSIDRetrieveSuccess |
Counter |
Incremented when IDs are successfully retrieved and decoded. |
IMSIDRetrieveFail |
Counter |
Incremented when ID retrieval or decoding fails. |
CassandraQueried |
Counter |
Incremented when a query is made to Cassandra. |
MultipleDevicesRegistered |
Counter |
Incremented when multiple registered devices have been detected. |
SubscriberNotRegistered |
Counter |
Incremented when could not find an active subscriber. |
RegistrationOutOfSync |
Counter |
Incremented when the searched subscriber information is not consistent between the network and the database. |
ResponseLatency |
Sampled |
Records elapsed time between querying the Cassandra database and getting a response (in milliseconds). |
IMSIDLookupFromCassandraIN
IMSIDLookupFromCassandraIN statistics are tracked by the IMSIDLookupFromCassandraIN feature and can be found under the following parameter sets:
SLEE-Usage ▶ sentinel.volte.ss7 service ID ▶ sentinel.volte.ss7 SBB ID ▶ IMSIDLookupFromCassandraIN feature.
| Name | Type | Description |
|---|---|---|
Started |
Counter |
Incremented when the feature runs. |
FailedToStart |
Counter |
Incremented when Sentinel VoLTE encounters an error while attempting to start the feature. |
IssuedWarning |
Counter |
Incremented when a non-fatal problem is encountered and the feature issues a warning. |
FailedDuringExecution |
Counter |
Incremented when a fatal problem is encountered and the feature cannot execute correctly. |
TimedOut |
Counter |
Incremented when the feature takes too long to complete and Sentinel VoLTE aborts execution. |
SLEE-Usage ▶ sentinel.volte.ss7 service ID ▶ volte.sentinel.volte-imsid-lookup-cassandra-ss7-feature SBB ID.
| Name | Type | Description |
|---|---|---|
Started |
Counter |
Incremented when the feature runs. |
FailedToStart |
Counter |
Incremented when Sentinel VoLTE encounters an error while attempting to start the feature. |
IssuedWarning |
Counter |
Incremented when a non-fatal problem is encountered and the feature issues a warning. |
FailedDuringExecution |
Counter |
Incremented when a fatal problem is encountered and the feature cannot execute correctly. |
FeatureError |
Counter |
Incremented when a feature error occurs. |
TimedOut |
Counter |
Incremented when the feature takes too long to complete and Sentinel VoLTE aborts execution. |
CassandraQueried |
Counter |
Incremented when Cassandra is queried for a subscriber’s registration. |
NoSubscriberSpecified |
Counter |
Incremented when no subscriber is specified for the query. |
SubscriberNotRegistered |
Counter |
Incremented when the returned subscriber from Cassandra is not registered. |
IMSIDRetrieveFail |
Counter |
Incremented when the Cassandra lookup fails. |
IMSIDRetrieveSuccess |
Counter |
Incremented when the Cassandra lookup succeeds. |
ImsUserStateSourceNotApplicable |
Counter |
Incremented when Sentinel VoLTE is configured to determine the IMS user state from the HSS |
ResponseLatency |
Sampled |
Records elapsed time between querying the Cassandra database and getting a response (in milliseconds). |
IMSUserStateLookupFromHSS
IMSUserStateLookupFromHSS statistics are tracked by the IMSUserStateLookupFromHSS feature and can be found under the following parameter sets:
SLEE-Usage ▶ sentinel.volte.ss7 service ID ▶ sentinel.volte.ss7 SBB ID ▶ IMSUserStateLookupFromHSS feature.
| Name | Type | Description |
|---|---|---|
Started |
Counter |
Incremented when the feature runs. |
FailedToStart |
Counter |
Incremented when Sentinel VoLTE encounters an error while attempting to start the feature. |
IssuedWarning |
Counter |
Incremented when a non-fatal problem is encountered and the feature issues a warning. |
FailedDuringExecution |
Counter |
Incremented when a fatal problem is encountered and the feature cannot execute correctly. |
TimedOut |
Counter |
Incremented when the feature takes too long to complete and Sentinel VoLTE aborts execution. |
SLEE-Usage ▶ sentinel.volte.ss7 service ID ▶ volte.sentinel.scc-lookup-ims-user-state-hss-feature SBB ID.
| Name | Type | Description |
|---|---|---|
Started |
Counter |
Incremented when the feature runs. |
FailedToStart |
Counter |
Incremented when Sentinel VoLTE encounters an error while attempting to start the feature. |
IssuedWarning |
Counter |
Incremented when a non-fatal problem is encountered and the feature issues a warning. |
FailedDuringExecution |
Counter |
Incremented when a fatal problem is encountered and the feature cannot execute correctly. |
FeatureError |
Counter |
Incremented when a feature error occurs. |
TimedOut |
Counter |
Incremented when the feature takes too long to complete and Sentinel VoLTE aborts execution. |
SubscriberNotRegistered |
Counter |
Incremented if the subscriber is not registered in the IMS. |
ImsUserStateQueried |
Counter |
Incremented when the ShCM is queried for a subscriber’s IMS user state. |
ImsUserStateRetrieveSuccess |
Counter |
Incremented when the ShCM lookup succeeds. |
ImsUserStateRetrieveFail |
Counter |
Incremented when the ShCM lookup fails. |
ImsUserStateUnknownSubscriber |
Counter |
Incremented when the ShCM lookup fails, as the subscriber in unknown in the IMS. |
ImsUserStateRetrieveSuccessNoData |
Counter |
Incremented when the ShCM lookup succeeds, but no IMS user state data is returned. |
ImsUserStateSourceNotApplicable |
Counter |
Incremented when Sentinel VoLTE is configured to determine the IMS user state from Third Party Registration |
SubscriberDataLookupFromHSS
SubscriberDataLookupFromHss statistics are tracked by the SubscriberDataLookupFromHss2 SBB and can be found under the following parameter set: SLEE-Usage → volte.sentinel.sip service ID → SubscriberDataLookupFromHss2 SBB ID.
| Name | Type | Description |
|---|---|---|
Invoked |
Counter |
Incremented each time the feature runs. |
Failed |
Counter |
Incremented if a fatal error occurs while the feature is running. |
SubscriberDataRetrieved |
Counter |
Incremented when the feature receives subscriber data from the Sh Cache Microservice. |
SessionStatePopulated |
Counter |
Incremented after the feature successfully processes the data it received, and loads it into session state fields. |
AdaptorClassError |
Counter |
Incremented when Adaptor class is not of type SimservsSessionAdaptor or the feature fails to retrieve adaptor class. |
CodecClassError |
Counter |
Incremented when Codec class is not of type ServiceDataCodec or the feature fails to retrieve codec class. |
Misconfigured |
Counter |
Incremented when absent configuration data prevents the feature from running. |
SessionStateNotFound |
Counter |
Incremented when the session state field the feature requires for operation is missing. |
ResponseLatency |
Sampled |
Records elapsed time between sending the request to the HSS and getting a response (in milliseconds). |
VolteNetworkKPI
VolteNetworkKPI statistics are tracked by the sentinel.volte.sip SBB and can be found under the following parameter set:
SLEE-Usage → sentinel.volte.sip service ID → sentinel.volte.sip SBB ID → feature.VolteNetworkKPI
| Name | Type | Description |
|---|---|---|
kPISccOrigOnNetAttempts |
counter |
Incremented on every 'onNet' SCCOrig call. |
kPISccOrigOnNetSuccess |
counter |
Incremented on 'success' 'onNet' SCCOrig call. |
kPISccOrigUnknownAttempts |
counter |
Incremented on every 'unknown' SCCOrig call. |
kPISccOrigUnknownSuccess |
counter |
Incremented on 'success' 'unknown' SCCOrig call. |
kPIMmtelTermOnNetAttempts |
counter |
Incremented on every 'onNet' MMTelTerm call. |
kPIMmtelTermOnNetSuccess |
counter |
Incremented on a 'success' 'onNet' MMTelTerm call. |
kPIMmtelTermUnknownAttempts |
counter |
Incremented on every 'unknown' MMTelTerm call. |
kPIMmtelTermUnknownSuccess |
counter |
Incremented on every 'unknown' 'success' MMTelTerm call. |
postDialDelayMMTelOrig0to500ms |
counter |
Incremented if the delay ⇐ 500 ms. |
postDialDelayMMTelOrig501to1000ms |
counter |
Incremented if the delay > 500 ms and ⇐ 1000 ms. |
postDialDelayMMTelOrig1001to1500ms |
counter |
Incremented if the delay > 1000 ms and ⇐ 1500 ms. |
postDialDelayMMTelOrig1501to2000ms |
counter |
Incremented if the delay > 1500 ms and ⇐ 2000 ms. |
postDialDelayMMTelOrig2001to2500ms |
counter |
Incremented if the delay > 2000 ms and ⇐ 2500 ms. |
postDialDelayMMTelOrig2501to3000ms |
counter |
Incremented if the delay > 2500 ms and ⇐ 3000 ms. |
postDialDelayMMTelOrigOver3000ms |
counter |
Incremented if the delay > 3000 |
postDialDelayMMTelTerm0to500ms |
counter |
Incremented if the delay ⇐ 500 ms. |
postDialDelayMMTelTerm501to1000ms |
counter |
Incremented if the delay > 500 ms and ⇐ 1000 ms. |
postDialDelayMMTelTerm1001to1500ms |
counter |
Incremented if the delay > 1000 ms and ⇐ 1500 ms. |
postDialDelayMMTelTerm1501to2000ms |
counter |
Incremented if the delay > 1500 ms and ⇐ 2000 ms. |
postDialDelayMMTelTerm2001to2500ms |
counter |
Incremented if the delay > 2000 ms and ⇐ 2500 ms. |
postDialDelayMMTelTerm2501to3000ms |
counter |
Incremented if the delay > 2500 ms and ⇐ 3000 ms. |
postDialDelayMMTelTermOver3000ms |
counter |
Incremented if the delay > 3000 |
postDialDelaySCCOrig0to500ms |
counter |
Incremented if the delay ⇐ 500 ms. |
postDialDelaySCCOrig501to1000ms |
counter |
Incremented if the delay > 500 ms and ⇐ 1000 ms. |
postDialDelaySCCOrig1001to1500ms |
counter |
Incremented if the delay > 1000 ms and ⇐ 1500 ms. |
postDialDelaySCCOrig1501to2000ms |
counter |
Incremented if the delay > 1500 ms and ⇐ 2000 ms. |
postDialDelaySCCOrig2001to2500ms |
counter |
Incremented if the delay > 2000 ms and ⇐ 2500 ms. |
postDialDelaySCCOrig2501to3000ms |
counter |
Incremented if the delay > 2500 ms and ⇐ 3000 ms. |
postDialDelaySCCOrigOver3000ms |
counter |
Incremented if the delay > 3000 |
postDialDelaySCCTerm0to500ms |
counter |
Incremented if the delay ⇐ 500 ms. |
postDialDelaySCCTerm501to1000ms |
counter |
Incremented if the delay > 500 ms and ⇐ 1000 ms. |
postDialDelaySCCTerm1001to1500ms |
counter |
Incremented if the delay > 1000 ms and ⇐ 1500 ms. |
postDialDelaySCCTerm1501to2000ms |
counter |
Incremented if the delay > 1500 ms and ⇐ 2000 ms. |
postDialDelaySCCTerm2001to2500ms |
counter |
Incremented if the delay > 2000 ms and ⇐ 2500 ms. |
postDialDelaySCCTerm2501to3000ms |
counter |
Incremented if the delay > 2500 ms and ⇐ 3000 ms. |
postDialDelaySCCTermOver3000ms |
counter |
Incremented if the delay > 3000 |
MMTel Features
MMTel Conference
MMTelCONF statistics are tracked by the MMTelCONF SBB and can be found under the following parameter set:
SLEE-Usage → volte.sentinel.sip service ID → MMTelCONF SBB ID.
| Statistic | Incremented when... |
|---|---|
FeatureInvocations |
the conference feature runs |
FeatureFsmCompletions |
the main conference FSM reaches its end state |
SentinelAborts |
Sentinel VoLTE instructs the conference feature to abort execution |
SipParseMinorFailure |
a non-fatal error occurs while attempting to read the information in a SIP message |
SipDataAccessFailure |
a problem occurs while trying to access a SIP leg or message |
SipParticipantSentByeOnActiveConnection |
a |
SipParticipantSentByeOnInactiveConnection |
a |
SipMRFSentByeOnActiveConnection |
a |
SipMRFSentByeOnInactiveConnection |
a |
ConferenceFeatureConfigurationFailure |
a problem occurs while trying to load the conference feature’s network-level configuration data |
ConferenceCoreError |
a fatal error occurs in the core conference feature FSM |
ConferenceConnectionError |
a fatal error occurs in the conference feature’s non-control connection management FSM |
ConferenceConnectionEstablished |
a non-control connection is successfully established between a conference participant and the MRF |
ConferenceConnectionMRFLegCreated |
a non-control leg to the MRF is successfully established |
ConferenceConnectionTerminated |
a fully established non-control conference connection is terminated |
ConferenceConnectionCreditCheckInitiated |
the conference feature triggers a credit check |
ConferenceConnectionParticipantSupportsVideo |
a participant has indicated that they support video in an SDP answer |
ConferenceControlConnectionError |
a fatal error occurs in the conference feature’s control connection management FSM |
ConferenceControlConnectionEstablished |
a control connection is successfully established between a conference moderator and the MRF. |
ConferenceControlConnectionTerminated |
a fully established conference control connection is terminated. |
ConferenceControlConnectionReceivedMalformedMessage |
a badly formed REFER request is received from the conference moderator. |
ConferenceControlConnectionQueuedNotify |
a NOTIFY is queued on the control connection |
ConferenceControlConnectionSentNotify |
a NOTIFY is sent to the conference moderator |
FromHeaderAnonymised |
the moderator has indicated they want privacy applied to the outgoing INVITE |
ConferenceMediaVideoSelected |
the moderator sets the conference up as a video session |
ConferenceMediaServerIsAccessedViaSCSCF |
the feature makes a call to the MRF via the S-CSCF |
MMTelCDIV
MMTelCDIV statistics are tracked by the volte.sentinel.sip SBB
and can be found under the following parameter set in REM:
SLEE-Usage → volte.sentinel.sip service → volte.sentinel.sip SBB → feature → MMTelCDIV
or with rhino-stats:
"SLEE-Usage.Services.ServiceID[name=volte.sentinel.sip,vendor=OpenCloud,version=4.0.0].SbbID[name=volte.sentinel.sip,vendor=OpenCloud,version=4.0.0].feature.MMTelCDIV"
| Statistic | Incremented when… |
|---|---|
Started |
the feature runs |
FailedToStart |
Sentinel VoLTE encounters an error while attempting to start the feature |
IssuedWarning |
a non-fatal problem is encountered and the feature issues a warning |
FailedDuringExecution |
a fatal problem is encountered and the feature cannot execute correctly |
TimedOut |
the feature takes too long to complete and Sentinel VoLTE aborts execution |
Misconfigured |
the feature configuration could not be loaded |
ProcessingSipResponse |
the feature is triggered on a SIP response |
ProcessingSipRequest |
the feature is triggered on a SIP request |
ProcessingChargingEvent |
the feature is triggered on a OCS event |
LegManagerError |
a problem occurs while trying to access data from the SIP leg manager |
ErrorProcessingSipRequest |
a problem occurs while trying to read or modify to a SIP request |
ErrorProcessingSipResponse |
a problem occurs while trying to read or modify to a SIP response |
DiversionLoopDetected |
diversion is aborted due to a diversion loop being detected |
DiversionLimitExceeded |
diversion is aborted due to the diversion limit being hit |
CancelledInviteRequest |
the CDIV feature cancels an |
ErrorCancellingInviteRequest |
a problem occurs while attempting to cancel an |
ReleasedDownstreamLeg |
caller is being diverted to voicemail |
TerminatedByResponse |
CDIV is aborted by sending an error response on the originating leg |
TerminatedByRetargeting |
CDIV is aborted by attempting to divert to a fixed final destination |
ErrorTerminatingByRetargeting |
diversion fails while trying to terminate by re-targeting |
NoReplyTimerSet |
the feature sets a timer for CFNR |
NoReplyTimerCancelled |
the feature cancels a timer for CFNR |
NoReplyTimerFired |
the feature is triggered by a CFNR timer expiring |
TimerSuppressedByResponseFromCSDomain |
timer is suppressed when parallel fork is done and the CS domain answers first |
CDIVSuppressedByResponseFromCSDomain |
CDIV service is suppressed when parallel fork is done and the CS domain answers first |
CallerNotifiedOfDiversion |
the feature notify the caller the session is being diverted |
FailedToNotifyCallerOfDiversion |
the feature fails to notify the caller the session is being diverted |
CFUSucceeded |
unconditional call forwarding is successfully executed |
CFUFailed |
a fatal problem occurs while trying to execute unconditional call forwarding |
CFNLSucceeded |
call forwarding due to the target user not being logged into IMS is successfully executed |
CFNLFailed |
a fatal problem occurs while trying to execute call forwarding due to the target user not being logged into IMS |
CFNRSucceeded |
call forwarding due to the target user not replying is successfully executed |
CFNRFailed |
a fatal problem occurs while trying to execute call forwarding due to the target user not replying |
CFBSucceeded |
call forwarding due to the target user being busy is successfully executed |
CFBFailed |
a fatal problem occurs while trying to execute call forwarding due to the target user being busy |
CFNRcSucceeded |
call forwarding due to the target user being unreachable is successfully executed |
CFNRcFailed |
a fatal problem occurs while trying to execute call forwarding due to the target user being unreachable |
CDImmediateSucceeded |
call forwarding due to immediate call deflection is successful. |
CDImmediateFailed |
a fatal problem occurs while trying to execute call forwarding due to immediate call deflection |
CDAlertingSucceeded |
call forwarding due to call deflection during alerting is successful |
CDAlertingFailed |
a fatal problem occurs while trying to execute call forwarding due to call deflection during alerting |
ToHeaderChanged |
'To' header is set to diverted party or served user |
SubscriberCDIVAttempted |
call forwarding due to subscriber rules was attempted, either succesfully or unsuccesfully |
OperatorCDIVAttempted |
call forwarding due to operator rules was attempted, either succesfully or unsuccesfully |
DivertingCallToVoicemail |
call is being forwarded to voicemail |
ExecutingDefaultForwardToVoicemail |
call is being re-targeted to voicemail |
ErrorExecutingDefaultForwardToVoicemail |
a fatal problem occured while re-targeting to voicemail |
DefaultForwardToVoicemailTimerSet |
the default forward to voicemail timer has been started |
DefaultForwardToVoicemailTimerCancelled |
the default forward to voicemail timer has been cancelled |
DefaultForwardToVoicemailTimerFired |
the default forward to voicemail timer has fired, call will be diverted to voicemail |
MMTelCW
MMTelCW statistics are tracked by the sentinel.volte.sip SBB
and can be found under the following parameter set in REM:
SLEE-Usage → sentinel.volte.sip service → sentinel.volte.sip SBB → feature → MMTelCW
or with rhino-stats:
"SLEE-Usage.Services.ServiceID[name=sentinel.volte.sip,vendor=OpenCloud,version=4.0.0].SbbID[name=sentinel.volte.sip,vendor=OpenCloud,version=4.0.0].feature.MMTelCW"
| Statistic | Incremented when… |
|---|---|
Started |
the feature runs |
FailedToStart |
Sentinel VoLTE encounters an error while attempting to start the feature |
IssuedWarning |
a non-fatal problem is encountered and the feature issues a warning |
FailedDuringExecution |
a fatal problem is encountered and the feature cannot execute correctly |
TimedOut |
the feature takes too long to complete and Sentinel VoLTE aborts execution |
Misconfigured |
a fatal error if the feature configuration can not be loaded |
TimerError |
there is an error while trying to set a timer |
TimerCancelled |
a timer is cancelled by the feature |
TimerSet |
a timer is set by the feature |
ProcessingResponse |
the feature is invoked on receiving a SIP response |
ProcessingTimerEvent |
the feature is invoked on a timer firing |
OutgoingMessageContentChanged |
the feature changes the contents of an outgoing SIP message |
ReattemptedCallSetup |
the feature requests that call set up be reattempted |
Triggered180AUDUBResponse |
the feature requests a 180 response be sent back to the original caller, indicating call waiting service |
PlayAnnouncementTriggered |
the feature triggers an announcement to be played |
CancelledInviteRequest |
the feature cancels an outgoing |
FinalResponseChangedTo486 |
the feature changes a SIP response status code to |
FinalResponseChangedTo480 |
the feature changes a SIP response status code to |
FallbackToNetworkDefaultServiceConfig |
incremented when the feature uses the network default service configuration as the session state does not contain the feature specific subscriber service data. |
MMTelHold
MMTelHold statistics are tracked by the sentinel.volte.sip SBB
and can be found under the following parameter set in REM:
SLEE-Usage → sentinel.volte.sip service → sentinel.volte.sip SBB → feature → MMTelHold
or with rhino-stats:
"SLEE-Usage.Services.ServiceID[name=sentinel.volte.sip,vendor=OpenCloud,version=4.0.0].SbbID[name=sentinel.volte.sip,vendor=OpenCloud,version=4.0.0].feature.MMTelHold"
| Statistic | Incremented when… |
|---|---|
Started |
the feature runs |
FailedToStart |
Sentinel VoLTE encounters an error while attempting to start the feature |
IssuedWarning |
a non-fatal problem is encountered and the feature issues a warning |
FailedDuringExecution |
a fatal problem is encountered and the feature cannot execute correctly |
TimedOut |
the feature takes too long to complete and Sentinel VoLTE aborts execution |
ProcessingRequest |
the feature is invoked on receiving a SIP request |
ProcessingResponse |
the feature is invoked on receiving a SIP response |
SipDataAccessError |
an error occurs while trying to access a SIP leg or message |
SipMessageSDPUpdated |
the feature changes the SDP content in a SIP message |
ReceivedHoldRequest |
the feature determines that an incoming message is a hold request |
ReceivedResumeRequest |
the feature determines that an incoming message is a resume request |
SessionBandwidthAdjusted |
any bandwidth information is adjusted in an SDP body |
MediaStreamBandwidthAdjusted |
bandwidth information is adjusted on a SDP media stream description |
MissingDataWarningTriggered |
an operation on SDP data fails due to the data being unavailable |
ReceivedMalformedMessage |
the feature determines that an incoming message is mal formed |
PlayAnnouncementTriggered |
the feature determines triggers the play announcement |
MMTelICB
MMTelICB statistics are tracked by the sentinel.volte.sip SBB
and can be found under the following parameter set in REM:
SLEE-Usage → sentinel.volte.sip service → sentinel.volte.sip SBB → feature → MMTelICB
or with rhino-stats:
"SLEE-Usage.Services.ServiceID[name=sentinel.volte.sip,vendor=OpenCloud,version=4.0.0].SbbID[name=sentinel.volte.sip,vendor=OpenCloud,version=4.0.0].feature.MMTelICB"
| Statistic | Type | Incremented when… |
|---|---|---|
Started |
Counter |
the feature runs |
FailedToStart |
Counter |
Sentinel VoLTE encounters an error while attempting to start the feature |
IssuedWarning |
Counter |
a non-fatal problem is encountered and the feature issues a warning |
FailedDuringExecution |
Counter |
a fatal problem is encountered and the feature cannot execute correctly |
TimedOut |
Counter |
the feature takes too long to complete and Sentinel VoLTE aborts execution |
CallBarred |
Counter |
the feature bars a call (including when barring due to ACR) |
CallBarredByOdb |
Counter |
the feature bars a call by Operator Determined Barring rule |
PlayAnnouncementTriggered |
Counter |
the feature requests that an announcement be played to the calling party |
ACRTriggered |
Counter |
a call is barred by ACR |
OdbRulesEvaluatedTrue |
Counter |
a rule was evaluated to be True |
RulesEvaluatedTrue |
Counter |
incremented by the number of rules which evaluated true |
FallbackToNetworkDefaultServiceConfig |
Counter |
incremented when the feature uses the network default service configuration as the session state does not contain the feature specific subscriber service data. |
MMTelOCB
MMTelOCB statistics are tracked by the sentinel.volte.sip SBB
and can be found under the following parameter set in REM:
SLEE-Usage → sentinel.volte.sip service → sentinel.volte.sip SBB → feature → MMTelOCB
or with rhino-stats:
"SLEE-Usage.Services.ServiceID[name=sentinel.volte.sip,vendor=OpenCloud,version=4.0.0].SbbID[name=sentinel.volte.sip,vendor=OpenCloud,version=4.0.0].feature.MMTelOCB"
| Statistic | Type | Description |
|---|---|---|
Started |
Counter |
Incremented when the feature is invoked. |
FailedToStart |
Counter |
Incremented when Sentinel VoLTE encounters an error while attempting to start the feature. |
IssuedWarning |
Counter |
Incremented when a non-fatal problem is encountered and the feature issues a warning. |
FailedDuringExecution |
Counter |
Incremented when a fatal problem is encountered and the feature cannot execute correctly. |
TimedOut |
Counter |
Incremented when the feature takes too long to complete and Sentinel VoLTE aborts execution. |
CallBarred |
Counter |
Incremented when the feature bars a call. |
CallExplicitlyAllowed |
Counter |
Incremented when the feature finds a rule that explicitly allows the call to go through, thus preventing any barring. |
ODBRuleApplied |
Counter |
Incremented when an ODB rule’s conditions were met and its action was executed. |
OCBRuleApplied |
Counter |
Incremented when an OCB rule’s conditions were met and its action was executed. |
PrefixBasedRuleApplied |
Counter |
Incremented when a rule was applied due to prefix barring. Either |
PlayAnnouncementTriggered |
Counter |
Incremented when the feature requests that an announcement be played to the calling party. |
RedirectionRequested |
Counter |
Incremented when an operator specific ODB rule’s conditions were met and it has been configured to redirect the call. |
RedirectionFailed |
Counter |
Incremented when an attempt to redirect the outbound |
RedirectionSuccessful |
Counter |
Incremented when an attempt to redirect the outbound |
OdbSpecificTypeRulesNotFound |
Counter |
Incremented when the subscriber data for the served user indicates that an operator specific ODB rule should be applied, but no configuration could be found for the specified rule. |
ClassifiedNumberByPrefix |
Counter |
Incremented when prefix barring classifies the dialled number as triggering some barring treatment(s). |
FoundMultipleNonConflictingPrefixBarringClassifications |
Counter |
Incremented when prefix barring classifies the dialled number and selects multiple classifications, all with separate treatments. |
FoundConflictingPrefixBarringClassifications |
Counter |
Incremented when prefix barring classifies the dialled number and selects multiple classifications, with some duplicate treatments. Such as
|
FallbackToNetworkDefaultServiceConfig |
Counter |
Incremented when the feature uses the network default service configuration as the session state does not contain the feature specific subscriber service data. |
MMTelOIP
MMTelOIP statistics are tracked by the sentinel.volte.sip SBB and can be found under the following parameter set:
SLEE-Usage → sentinel.volte.sip service → sentinel.volte.sip SBB → feature → MMTelOIP
| Name | Type | Description |
|---|---|---|
Started |
Counter |
Incremented when the feature is triggered. |
FailedToStart |
Counter |
Incremented when the feature fails to start. |
FailedDuringExecution |
Counter |
Incremented when the feature fails while executing. |
IssuedWarning |
Counter |
Incremented when the feature issues a warning. |
TimedOut |
Counter |
Incremented when the feature times out during execution. |
Misconfigured |
Counter |
Incremented when a fatal error if the feature configuration cannot be loaded. |
ReceivedMalformedPrivacyHeader |
Counter |
Incremented when a non-standard ‘Privacy’ header is found in an incoming SIP message. |
FromHeaderAnonymized |
Counter |
Incremented when the feature anonymizes the ‘From’ header in an outgoing SIP request. |
ContactHeaderAnonymized |
Counter |
Incremented when the feature anonymizes the ‘Contact’ header in an outgoing SIP message. |
ReferredByHeaderAnonymized |
Counter |
Incremented when the feature anonymizes the ‘Referred-By’ header in an outgoing SIP message. |
PerformedUserLevelAnonymization |
Counter |
Incremented when the feature applies user-level privacy to an outgoing SIP message. |
PerformedHeaderLevelAnonymization |
Counter |
Incremented when the feature applies header-level privacy to an outgoing SIP message. |
PerformedSessionLevelAnonymization |
Counter |
Incremented when the feature applies session-level privacy to an outgoing SIP message. |
PerformedCustomHeaderAnonymization |
Counter |
Incremented when the feature finds and evaluates custom header privacy rules for a message. |
OverrideCategoryTriggered |
Counter |
Incremented when the feature disregards requested privacy settings on an incoming SIP message (due to the subscriber having override category status). |
CriticalPrivacyCannotBeFulfilled |
Counter |
Incremented when the feature refuses an incoming request due to a |
FallbackToNetworkDefaultServiceConfig |
Counter |
Incremented when the feature uses the network default service configuration as the session state does not contain the feature specific subscriber service data. |
MMTelOIR
MMTelOIR statistics are tracked by the sentinel.volte.sip SBB and can be found under the following parameter set:
SLEE-Usage → sentinel.volte.sip service → sentinel.volte.sip SBB
| Statistic | Increments when... |
|---|---|
Started |
the feature runs |
FailedToStart |
Sentinel VoLTE encounters an error while attempting to start the feature |
IssuedWarning |
a non-fatal problem is encountered and the feature issues a warning |
FailedDuringExecution |
a fatal problem is encountered and the feature cannot execute correctly |
TimedOut |
the feature takes too long to complete and Sentinel VoLTE aborts execution |
Misconfigured |
a fatal error if the feature configuration can not be loaded |
ReceivedMalformedPrivacyHeader |
a non-standard |
FromHeaderAnonymized |
the feature anonymizes the |
PrivacyHeaderChanged |
the feature changes the contents of the |
FallbackToNetworkDefaultServiceConfig |
incremented when the feature uses the network default service configuration as the session state does not contain the feature specific subscriber service data. |
MMTelTIP
MMTelTIP statistics are tracked by the sentinel.volte.sip SBB
and can be found under the following parameter set in REM:
SLEE-Usage → sentinel.volte.sip service → sentinel.volte.sip SBB → feature → MMTelTIP
or with rhino-stats:
SLEE-Usage → [sentinel.volte.sip service name] → [sentinel.volte.sip SBB name] → .feature.MMTelTIP
| Statistic | Incremented when… |
|---|---|
Started |
the feature runs |
FailedToStart |
Sentinel VoLTE encounters an error while attempting to start the feature |
IssuedWarning |
a non-fatal problem is encountered and the feature issues a warning |
FailedDuringExecution |
a fatal problem is encountered and the feature cannot execute correctly |
TimedOut |
the feature takes too long to complete and Sentinel VoLTE aborts execution |
ProcessingResponse |
the feature processes a SIP response |
ProcessingRequest |
the feature processes a SIP request |
OverrideCategoryTriggered |
the feature disregards requested privacy settings on an incoming SIP message (due to the subscriber having override category status) |
FromChangeTagRemoved |
the feature removes the |
PrivacyHeaderChanged |
the feature changes the contents of the |
FallbackToNetworkDefaultServiceConfig |
incremented when the feature uses the network default service configuration as the session state does not contain the feature specific subscriber service data. |
MMTelTIR
MMTelTIR statistics are tracked by the sentinel.volte.sip SBB
and can be found under the following parameter set in REM:
SLEE-Usage → sentinel.volte.sip service → sentinel.volte.sip SBB → feature → MMTelTIR
or with rhino-stats:
SLEE-Usage → [sentinel.volte.sip service name] → [sentinel.volte.sip SBB name] → .feature.MMTelTIR
| Statistic | Incremented when… |
|---|---|
Started |
the feature runs |
FailedToStart |
Sentinel VoLTE encounters an error while attempting to start the feature |
IssuedWarning |
a non-fatal problem is encountered and the feature issues a warning |
FailedDuringExecution |
a fatal problem is encountered and the feature cannot execute correctly |
TimedOut |
the feature takes too long to complete and Sentinel VoLTE aborts execution |
ProcessingResponse |
the feature processes a SIP response |
ProcessingRequest |
the feature processes a SIP request |
FromChangeTagRemoved |
the feature removes the |
ReceivedMalformedPrivacyHeader |
a non-standard |
PrivacyHeaderChanged |
the feature changes the contents of the |
FallbackToNetworkDefaultServiceConfig |
incremented when the feature uses the network default service configuration as the session state does not contain the feature specific subscriber service data. |
MMTelWifiChargingFinalisation
MMTelWifiChargingFinalisation statistics are tracked by the sentinel.volte.sip SBB and can be found under the following parameter set:
SLEE-Usage → [sentinel.volte.sip service name] → [sentinel.volte.sip SBB name] → feature.MMTelWifiChargingFinalisation
| Statistic | Increments when… |
|---|---|
Started |
The feature is started. |
OCTerminatingDomainHeaderStripped |
An OC-Terminating-Domain header is found on an outgoing message and removed. |
ChargingInstanceFinalised |
A non-finalised reservation charging instance is found and finalised. |
Received2xxForOriginalInvite |
A SIP 2xx response for the initial INVITE is received by the feature. |
TerminatingDomainIsWifi |
The feature determines that terminating access is over WiFi. |
FailedToStart |
Sentinel VoLTE encounters an error while attempting to start the feature. |
IssuedWarning |
A non-fatal problem is encountered and the feature issues a warning. |
FailedDuringExecution |
A fatal problem is encountered and the feature cannot execute correctly. |
TimedOut |
The feature takes too long to complete and Sentinel VoLTE aborts execution. |
MMTelParallelFA
MMTelParallelFA statistics are tracked by the sentinel.volte.sip SBB
and can be found under the following parameter set in REM:
SLEE-Usage → sentinel.volte.sip service → sentinel.volte.sip SBB → feature → MMTelParallelFA
or with rhino-stats:
"SLEE-Usage.Services.ServiceID[name=sentinel.volte.sip,vendor=OpenCloud,version=4.0.0].SbbID[name=sentinel.volte.sip,vendor=OpenCloud,version=4.0.0].feature.MMTelParallelFA"
| Name | Type | Incremented when … |
|---|---|---|
Started |
Counter |
each time the feature runs |
FailedDuringExecution |
Counter |
a fatal error occurs while the feature is executing |
FailedToStart |
Counter |
Sentinel VoLTE encounters an error while attempting to start the feature. |
IssuedWarning |
Counter |
a non-fatal problem is encountered and the feature issues a warning. |
TimedOut |
Counter |
the feature takes too long to complete and Sentinel VoLTE aborts execution |
ProcessingRequest |
Counter |
processing a request message. |
ProcessingResponse |
Counter |
processing a response from the downstream forked legs. |
InviteRequestReceived |
Counter |
the original INVITE is received. |
CancelRequestReceived |
Counter |
a CANCEL message is received. |
ProvisionalResponseReceived |
Counter |
a 1xx message is received. |
GroupMemberAlerted |
Counter |
an INVITE request is sent to a group member. |
LegReleased |
Counter |
a dialog leg is released. |
UpstreamForkCreated |
Counter |
the feature creates a new leg towards the calling party. It happens on the provisional responses. |
TriggeredOnResponse |
Counter |
the feature is triggered on a response message. |
TriggeredOnRequest |
Counter |
the feature is triggered on a request message. |
TriggeredOnTimer |
Counter |
the feature is triggered on a timmer. |
TimeoutTimerCancelled |
Counter |
the feature cancel the timer. |
TimeoutTimerSet |
Counter |
the feature sets the timer. The timer is set before the INVITE is sent to the first group member. |
ExitedEarlyNoMembersToAlert |
Counter |
there is just one member in the group and it is the pilot number. |
Received480 |
Counter |
receives a 480 (Temporarily Unavailable) response from a member |
Received486 |
Counter |
receives a 486 (Busy Here) response from a member |
Received408 |
Counter |
receives a 408 (Timeout) response from a member |
Received404 |
Counter |
receives a 404 (Not found) response from a member |
ReceivedSuccess |
Counter |
receives a 200 (OK) response from a member |
RespondedUpstreamWith480 |
Counter |
the feature sends a 480 (Temporarily Unavailable) to the calling party. |
RespondedUpstreamWith486 |
Counter |
the feature sends a 486 (Busy Here) to the calling party. |
RespondedUpstreamWith408 |
Counter |
the feature sends a 408 (Timeout) to the calling party. |
RespondedUpstreamWith404 |
Counter |
the feature sends a 404 (Not found) to the calling party. |
RespondedUpstreamWithSuccess |
Counter |
the feature sends a 200 (OK) to the calling party. |
MMTelSequentialFA
MMTelSequentialFA statistics are tracked by the sentinel.volte.sip SBB
and can be found under the following parameter set in REM:
SLEE-Usage → sentinel.volte.sip service → sentinel.volte.sip SBB → feature → MMTelSequentialFA
or with rhino-stats:
"SLEE-Usage.Services.ServiceID[name=sentinel.volte.sip,vendor=OpenCloud,version=4.0.0].SbbID[name=sentinel.volte.sip,vendor=OpenCloud,version=4.0.0].feature.MMTelSequentialFA"
| Name | Type | Incremented when … |
|---|---|---|
Started |
Counter |
each time the feature runs |
FailedDuringExecution |
Counter |
a fatal error occurs while the feature is executing |
FailedToStart |
Counter |
Sentinel VoLTE encounters an error while attempting to start the feature. |
IssuedWarning |
Counter |
a non-fatal problem is encountered and the feature issues a warning. |
TimedOut |
Counter |
the feature takes too long to complete and Sentinel VoLTE aborts execution |
ProcessingRequest |
Counter |
processing a request message. |
ProcessingResponse |
Counter |
processing a response from a downstream forked leg. |
InviteRequestReceived |
Counter |
the original invite is received. |
CancelRequestReceived |
Counter |
a CANCEL message is received. |
ProvisionalResponseReceived |
Counter |
a 1xx message is received. |
SuccessResponseReceived |
Counter |
a 200 (OK) message is received. |
GroupMemberAlerted |
Counter |
an INVITE message was sent to a group member. |
GroupMemberAddedToQueue |
Counter |
a group member was queued for alerting. |
MemberLegReleased |
Counter |
a dialog leg is released. |
RespondedUpstreamManually |
Counter |
the feature created an upstream response. |
TriggeredOnResponse |
Counter |
the feature is triggered on a response message. |
TriggeredOnRequest |
Counter |
the feature is triggered on a request message. |
TriggeredOnTimer |
Counter |
the feature is triggered on a timer event. |
TriggeredOnLegEndEvent |
Counter |
the feature is triggered on a SIP leg end event. |
AnyResponseTimerSet |
Counter |
the feature set a timer to wait for a response on a downstream leg. |
FinalResponseTimerSet |
Counter |
the feature set a timer to wait for a final response on a downstream leg. |
AnyResponseTimerCancelled |
Counter |
the timer waiting for a response on a downstream leg was cancelled. |
FinalResponseTimerCancelled |
Counter |
the timer waiting for a final response on a downstream leg was cancelled. |
TimerFired |
Counter |
the feature handled a timer event. |
ExitedEarlyNoMembersToAlert |
Counter |
there is just one member in the group and it is the pilot number. |
MMTelECT
| Name | Increments when … |
|---|---|
Started |
each time the feature runs |
FailedDuringExecution |
a fatal error occurs while the feature is executing |
FailedToStart |
Sentinel VoLTE encounters an error while attempting to start the feature. |
IssuedWarning |
a non-fatal problem is encountered and the feature issues a warning. |
TimedOut |
the feature takes too long to complete and Sentinel VoLTE aborts execution. |
ReferReceivedFromServedUser |
a REFER request has been received from the served user |
ReferSuccessful |
the transferee has responded to a processed REFER request with a 202 Accepted) |
ReferProcessedAndForwarded |
a REFER request has been received from the transferor, appropriately modified and sent to the transferee |
EctInviteReceived |
an INVITE request has been received from the transferor as a result of a previous REFER request |
EctInviteProcessedAndForwarded |
an ECT INVITE request has been received by the transferee, appropriately modified and sent to the transfer-target |
ThirdPartyCallControlProceduresInvoked |
the Third Party Call Control (3pcc) transfer procedures have been invoked |
ThirdPartyCallControlProceduresFailed |
the Third Party Call Control (3pcc) transfer procedures did not result in a successful dialogue between the transferee and transfer-target |
OriginalCallResumed |
the original dialogue between the transferee and the transferor has been resumed if the 3pcc procedures failed |
CassandraInsertSucceeded |
ECT session information has been successfully inserted into the Cassandra DB |
CassandraInsertFailed |
an error occurred attempting to insert ECT session information into the Cassandra DB |
CassandraQuerySucceeded |
ECT session information has been successfully retrieved from the Cassandra DB |
CassandraQueryFailed |
an error occurred attempting to retrieve ECT session information from the Cassandra DB |
DeletedCassandraRow |
REFER request was cancelled by user, and so the Cassandra ECT record was deleted. |
StoppedHandlingAndAllowedB2BUA |
an INVITE request with a Request URI matching the ECT URI pattern was received and forwarded without modification |
TransferSuccessful |
a 200 (OK) was received from the transfer-target as a result of the ECT procedures |
ErrorOccurredDuringExecution |
an error occurred attempting to execute the feature |
NoAnswerTimerFired |
The feature timed-out waiting for an answer from a sent request. |
MMTel Session Transfer features
MMTelStodBind
MMTelBindAci statistics are tracked by the sentinel.volte.sip SBB
and can be found under the following parameter set in REM:
SLEE-Usage → sentinel.volte.sip service → sentinel.volte.sip SBB → feature → MMTelBindAci
or with rhino-stats:
"SLEE-Usage.Services.ServiceID[name=sentinel.volte.sip,vendor=OpenCloud,version=4.0.0].SbbID[name=sentinel.volte.sip,vendor=OpenCloud,version=4.0.0].feature.MMTelBindAci"
| Name | Incremented when… |
|---|---|
Started |
the feature runs |
FailedToStart |
Sentinel VoLTE encounters an error while attempting to start the feature |
IssuedWarning |
a non-fatal problem is encountered and the feature issues a warning |
FailedDuringExecution |
a fatal problem is encountered and the feature cannot execute correctly |
TimedOut |
the feature takes too long to complete and Sentinel VoLTE aborts execution |
BoundAciToImpu |
the ACI is bound to an this is incremented. |
UsedLinkedAciForBinding |
the triggering ACI is not used for binding, i.e the call is not MobileTerminating then the linked ACI is used. |
UsedTriggeringAciForBinding |
the call is a MobileTerminating call the Triggering ACI is used for binding. |
MMTelStodEnabled
| Name | Incremented when… |
|---|---|
Started |
the feature runs |
FailedToStart |
Sentinel VoLTE encounters an error while attempting to start the feature |
IssuedWarning |
a non-fatal problem is encountered and the feature issues a warning |
FailedDuringExecution |
a fatal problem is encountered and the feature cannot execute correctly |
TimedOut |
the feature takes too long to complete and Sentinel VoLTE aborts execution |
StodIsEnabled |
the Stod is enabled for a subscriber |
StodIsNotEnabled |
the Stod is not enabled for a subscriber |
StodEnableSessionTracking |
STOD session tracking is enabled for this session |
StodSessionTrackingDisabled |
STOD session tracking is disabled for this session |
FoundTrackingKey |
A tracking key has been created for this session and added to the set |
MMTelStodProcessHandover
| Name | Incremented when… |
|---|---|
Started |
the feature runs |
FailedToStart |
Sentinel VoLTE encounters an error while attempting to start the feature |
IssuedWarning |
a non-fatal problem is encountered and the feature issues a warning |
FailedDuringExecution |
a fatal problem is encountered and the feature cannot execute correctly |
TimedOut |
the feature takes too long to complete and Sentinel VoLTE aborts execution |
SentRemoteUpdate |
a re-INVITE is sent to the called party. |
RemoteUpdateSuccess |
re-INVITE was accepted (200 OK). |
RemoteUpdateError |
re-INVITE was not accepted. |
CallAnsweredWith200 |
the (200 OK) from the re-INVITE is sent to the new access leg |
ReleasedOldAccessLeg |
the previous calling leg is released |
LinkedNewAccessLegToRemoteLeg |
the transfer INVITE leg is linked to the existing called party leg |
TerminatedSession |
the session finishes |
AccessTransferComplete |
the session transfer was done successfully |
HandoverRequestReceived |
a session transfer INVITE is received |
StodEnableSessionTracking |
tries to mark the new transfered session to be tracked |
FoundTrackingKey |
the tracking key is set |
StodSessionTrackingDisabled |
when failed to set the new transfered session to be tracked |
MMTelStodTriggerAnchor
MMTelStodTriggerAnchor statistics are tracked by the sentinel.volte.sip SBB
and can be found under the following parameter set in REM:
SLEE-Usage → sentinel.volte.sip service → sentinel.volte.sip SBB → feature → MMTelStodTriggerAnchor
or with rhino-stats:
"SLEE-Usage.Services.ServiceID[name=sentinel.volte.sip,vendor=OpenCloud,version=4.0.0].SbbID[name=sentinel.volte.sip,vendor=OpenCloud,version=4.0.0].feature.MMTelStodTriggerAnchor"
| Name | Incremented when… |
|---|---|
Started |
the feature runs |
FailedToStart |
Sentinel VoLTE encounters an error while attempting to start the feature |
IssuedWarning |
a non-fatal problem is encountered and the feature issues a warning |
FailedDuringExecution |
a fatal problem is encountered and the feature cannot execute correctly |
TimedOut |
the feature takes too long to complete and Sentinel VoLTE aborts execution |
FiredIncomingRequestEvent |
the transfer INVITE is sent to the session to be transfered. |
SCC Features
Service Centralisation Features
SCCCamelToIMSReOriginationIN
SCCCamelToIMSReOriginationIN statistics are tracked by the sentinel.volte.ss7 SBB and can be found under the following parameter set:
SLEE-Usage → sentinel.volte.ss7 service → sentinel.volte.ss7 SBB → feature → SCCCamelToIMSReOriginationIN
| Parameter | Type | Description |
|---|---|---|
Started |
Counter |
Incremented when the feature starts. |
FailedToStart |
Counter |
Incremented when the feature failed to start due to an error. |
IssuedWarning |
Counter |
Incremented when the feature raised a warning. |
FailedDuringExecution |
Counter |
Incremented when the feature failed due to a major error. |
TimedOut |
Counter |
Incremented when the feature timed out during execution. |
CallReOriginated |
Counter |
Incremented when the call is successfully reoriginated. |
CallReleased |
Counter |
Incremented when reorigination fails and the call is released. |
ReoriginationFailedCallContinued |
Counter |
Incremented when reorigination fails but the call is able to be continued. |
Misconfigured |
Counter |
Incremented when the feature has not been correctly configured. |
IdpVlrNumberPresent |
Counter |
Incremented when the VLR number is found in the incoming |
IdpVlrNumberNotPresent |
Counter |
Incremented when the VLR number is not found in the incoming |
VisitedNetworkIdNotFound |
Counter |
Incremented when the feature is unable to determine the Visited Network ID. |
VisitedNetworkIdFound |
Counter |
Incremented when the feature is able to determine the Visited Network ID based on the VLR address. |
PoolAllocationFailed |
Counter |
Incremented when the feature fails to acquire a correlation ID from the correlation RA. |
PoolAllocationSucceeded |
Counter |
Incremented when the feature acquires a correlation ID from the correlation RA. |
OriginatingIMRNAttempt |
Counter |
Incremented when the feature executes reorigination for an originating call leg. |
TerminatingIMRNAttempt |
Counter |
Incremented when the feature executes reorigination for a terminating call leg. |
ReoriginationBypassed |
Counter |
Incremented when the feature bypasses reorigination for an unregistered subscriber. |
StoringCorrelationDataInCassandra |
Counter |
Incremented when the feature stores call information data in cassandra |
FailedToStoreCorrelationDataInCassandra |
Counter |
Incremented when there is a failure to store call information data in cassandra |
PoolAllocationReleased |
Counter |
Incremented when an allocated correlation ID is released due to any failure |
SCCCamelToIMSReOriginationSIP
SCCCamelToIMSReOriginationSIP statistics are tracked by the volte.sentinel.sip SBB and can be found under the following parameter set:
SLEE-Usage → volte.sentinel.sip service → volte.sentinel.sip SBB → feature → SCCCamelToIMSReOriginationSIP
| Statistic | Incremented when… |
|---|---|
Complete |
The feature ran to completion |
MultipleHistoryInfoHeadersFound |
Multiple history-info headers found on the |
NoHistoryInfoHeaderFound |
no history-info header found on the |
OneHistoryInfoHeaderFoundAndRemoved |
One history-info header found on the |
HSSLookupFailed |
HSS lookup failed |
HSSLookupSuccess |
HSS lookup succeeded |
HSSLookupSkipped |
HSS lookup was skipped due to SkipHSSLookup feature configuration flag |
CorrelationRaQueried |
Correlation RA was queried for the call information |
CorrelationRaQuerySuccess |
The Correlation RA query succeeded |
CorrelationRaQueryFailure |
The Correlation RA query failed |
IdpVlrNumberPresent |
The VLR number is present in the |
IdpVlrNumberNotPresent |
The VLR number is not present in the |
VisitedNetworkIdFound |
The feature could set the Visited Network Id based on the Location information or on the VLR address |
VisitedNetworkIdNotFound |
The feature could set the Visited Network Id |
IdpCalledPartyNumberPresent |
The |
IdpCalledPartyNumberNotPresent |
The |
SCSCFAddressNotFound |
The SCSCF could not be found in configuration, or retrieved from the HSS |
AccessNetworkInfoFound |
AccessNetworkInfo was found in the original |
AccessNetworkInfoNotFound |
AccessNetworkInfo could not be found in the original |
CallingPartyAndPaiDoNotMatch |
The request is rejected because of a mismatch between calling party and P-Asserted-Identity |
CassandraQueried |
Cassandra is queried for call information related to a correlation ID |
CassandraQueryFailed |
There is a failure to execute a cassandra query |
CassandraQueryResultReceived |
A CassandraQueryResult event is received with the result of the Cassandra query for call information |
CassandraQueryErrorReceived |
A CassandraQueryError event is received due to a failure |
CassandraQueryResultMissingData |
A CassandraQueryResult event is received with no call information associated for a correlation ID |
CassandraQueryResultExpired |
A CassandraQueryResult event is received with call information that has expired |
ReleasingCorrelationIdOnRemoteNode |
A SIP MESSAGE has been sent to a remote SCC-AS node to release a correlation ID |
FailedToReleaseCorrelationIdOnRemoteNode |
There was a failure to release a correlation ID on a remote SCC-AS node by sending a SIP MESSAGE |
ReleasedCorrelationIdUsedOnRemoteNode |
A correlation ID has been released in response to a SIP MESSAGE received from a remote SCC-AS node |
Started |
The feature starts |
FailedToStart |
The feature failed to start due to an error |
IssuedWarning |
The feature raised a warning |
FailedDuringExecution |
The feature failed due to a major error |
TimedOut |
The feature timed out during execution |
Terminating Access Domain Selection Features
SCCTADSDataLookup
SCCTADSDataLookUp statistics are tracked by the SCCTADSDataLookUp SBB and can be found under the following parameter set: SLEE-Usage → volte.sentinel.sip service ID → SCCTADSDataLookUp SBB ID.
| Name | Type | Description |
|---|---|---|
Started |
Counter |
Incremented when the feature is triggered. |
FailedToStart |
Counter |
Incremented when the feature fails to start. |
FailedDuringExecution |
Counter |
Incremented when the feature fails while executing. |
IssuedWarning |
Counter |
Incremented when the feature issues a warning. |
TimedOut |
Counter |
Incremented when the feature times out during execution. |
QueriedShCache |
Counter |
Incremented when the Sh Cache Microservice RA is queried. |
ShCacheDataReceived |
Counter |
Incremented when the Sh Cache Microservice RA returns data from the query. |
FoundValidCSRoute |
Counter |
Incremented when the feature finds a valid route to the CS domain. |
FoundValidPSRoute |
Counter |
Incremented when the feature finds a valid route to the PS domain. |
BlindPSRoutingRequested |
Counter |
Incremented when the feature has set the BlindPSRouting Session State field. |
NoForkDispositionOverrodeRoutingMode |
Counter |
Incremented when the feature does not fork due to disposition header. |
CompanionDeviceOverrodeRoutingMode |
Counter |
Incremented when the feature selects |
TriggeredEndSession |
Counter |
Incremented when the feature rejects an |
ResponseLatency |
Sampled |
Records elapsed time between requesting data from the Sh Cache Microservice RA and getting a response (in milliseconds). |
CompanionDeviceSipInstanceRoutingEnabled |
Counter |
Incremented when enabling companion device sip instance routing override. |
SCCTADSParallelRouting
SCCTADSParallelRouting statistics are tracked by the volte.sentinel.sip SBB and can be found under the following parameter set:
SLEE-Usage → volte.sentinel.sip service ID → volte.sentinel.sip SBB ID → feature.SCCTADSParallelRouting
| Name | Description |
|---|---|
Started |
Incremented when the feature is triggered. |
FailedToStart |
Incremented when the feature fails to start. |
FailedDuringExecution |
Incremented when the feature fails while executing. |
IssuedWarning |
Incremented when the feature issues a warning. |
TimedOut |
Incremented when the feature times out during execution. |
TriggeredOnRequest |
Incremented when the feature is triggered on a SIP Request. |
TriggeredOnResponse |
Incremented when the feature is triggered on a SIP Response. |
TriggeredOnTimer |
Incremented when the feature is triggered on the timer firing. |
CSRNNotFound |
Incremented when the CS fork cannot be established because no CSRN can be found. |
MaxWaitTimerSet |
Incremented when the Max Wait Timer is started. |
MaxWaitTimerCancelled |
Incremented when the Max Wait Timer is cancelled. |
UpstreamForkCreated |
Incremented when an upstream forked leg is created to forward a provisional or success response from the CS leg or any secondary PS leg. |
ReceivedProvisionalResponse |
Incremented when a provisional 18x response is received. |
ReceivedFinalResponse |
Incremented when a final response is received for the initial INVITE. |
RouteToCSAttempted |
Incremented when an INVITE is routed down the CS forked leg. |
RouteToPSAttempted |
Incremented when an INVITE is routed down a PS forked leg. |
RouteToCSFailed |
Incremented when the CS leg is torn down without being answered. |
RouteToPSFailed |
Incremented when a PS leg is torn down without being answered. |
AnsweredOnCS |
Incremented when a success response is received on the CS leg. |
AnsweredOnPS |
Incremented when a success response is received on a PS leg. |
TADSTerminatingDomainsNotSet |
Incremented when the feature cannot retrieve the terminating domains for the active routes from session state. |
NoForkAdded |
Incremented when the feature adds the |
NoForkRemoved |
Incremented when the feature removes the |
SCCTADSRouting
SCCTADSRouting statistics are tracked by the SCCTADSRouting SBB and can be found under the following parameter set: SLEE-Usage → sentinel.volte.sip service ID → SCCTADSRouting SBB ID.
| Name | Description |
|---|---|
Started |
Incremented when the feature is triggered. |
FailedToStart |
Incremented when the feature fails to start. |
FailedDuringExecution |
Incremented when the feature fails while executing. |
IssuedWarning |
Incremented when the feature issues a warning. |
TimedOut |
Incremented when the feature times out during execution. |
RouteToPreferredPS |
Incremented when the feature successfully routes to the first packet route when PS is preferred mode. |
RouteToPreferredCS |
Incremented when the feature successfully routes to the first CSRN when CS is preferred mode. |
RouteToFallbackPS |
Incremented when the feature successfully routes to the first packet route when PS is the fallback mode. |
RouteToFallbackCS |
Incremented when the feature successfully routes to the first CSRN when CS is the fallback mode. |
RouteToSecondaryPS |
Incremented when the feature successfully routes to a subsequent packet route when PS is the preferred or fallback mode. |
RouteToSecondaryCS |
Incremented when the feature successfully routes to a subsequent CSRN when CS is the preferred or fallback mode. |
ErrorResponseMatched |
Incremented when an error response received from a routing attempt triggers a new routing attempt. |
Error18xMatched |
Incremented when the PS call 18x response matches the SDP requirements outlined in 18x Response. |
Received18xResponse |
Incremented when the feature receives a 18x response to the initial |
Received488Response |
Incremented when the feature receives a 488 message from the PS call. |
ReceivedPSToCSFallbackResponseCode |
Incremented when the feature receives a error message from the PS call that is contained in |
TerminatingDomainHeaderSet |
Incremented when the feature adds a terminating domain header to an upstream response |
TADSTimerFired |
Incremented when the Max Wait Timer for a response on a routing attempt is exceeded |
RouteToPreferredPSAnswered |
Incremented when the first packet route is answered and PS is the referred mode. |
RouteToFallbackPSAnswered |
Incremented when the first packet route is answered and PS is the fallback mode. |
RouteToSecondaryPSAnswered |
Incremented when a subsequent packet route answered and PS is the preferred or fallback mode. |
RouteToPreferredCSAnswered |
Incremented when the first CSRN is answered and CS is the referred mode. |
RouteToFallbackCSAnswered |
Incremented when the first CSRN is answered and CS is the fallback mode. |
RouteToSecondaryCSAnswered |
Incremented when a subsequent CSRN is answered and CS is the referred or fallback mode. |
RouteToPreferredPSFailed |
Incremented when the first packet route returns a failed SIP response e.g. >299 and PS is the referred mode. |
RouteToPreferredCSFailed |
Incremented when the first CSRN returns a failed SIP response e.g. >299 and CS is the referred mode. |
RouteToFallbackPSFailed |
Incremented when the first packet route returns a failed SIP response e.g. >299 and PS is the fallback mode. |
RouteToFallbackCSFailed |
Incremented when the first CSRN returns a failed SIP response e.g. >299 and CS is the fallback mode. |
RouteToSubsequentPSFailed |
Incremented when a subsequent packet route returns a failed SIP response e.g. >299 and PS is the preferred or fallback mode. |
RouteToSubsequentCSFailed |
Incremented when a subsequent CSRN returns a failed SIP response e.g. >299 and CS is the preferred or fallback mode. |
SelectedPreferredPS |
Incremented when the first packet route is selected and PS is the preferred mode. |
SelectedPreferredCS |
Incremented when the first CSRN is selected and CS is the preferred mode. |
SelectedFallbackPS |
Incremented when the first packet route is selected and PS is the fallback mode. |
SelectedFallbackCS |
Incremented when the first CSRN is selected and CS is the fallback mode. |
SelectedSecondaryPS |
Incremented when a subsequent packet route is selected and PS is the preferred or fallback mode. |
SelectedSecondaryCS |
Incremented when a subsequent CSRN is selected and CS is the preferred or fallback mode. |
AttemptSuppressCSDomainCallDiversion |
Incremented when a diversion header is added to an outgoing request to the CS domain to suppress CS network call diversion. |
Packet Switched to Circuit Switched Access Transfer features
SCCProcessHandoverInsideAnchor
SCCProcessHandoverInsideAnchor statistics are tracked by the sentinel.volte.sip SBB
and can be found under the following parameter set in REM:
SLEE-Usage → sentinel.volte.sip service → sentinel.volte.sip SBB → feature → SCCProcessHandoverInsideAnchor
or with rhino-stats:
"SLEE-Usage.Services.ServiceID[name=sentinel.volte.sip,vendor=OpenCloud,version=4.0.0].SbbID[name=sentinel.volte.sip,vendor=OpenCloud,version=4.0.0].feature.SCCProcessHandoverInsideAnchor"
| Name | Type | Description |
|---|---|---|
Started |
Counter |
Incremented each time the feature runs. |
FailedToStart |
Counter |
Incremented when Sentinel VoLTE encounters an error while attempting to start the feature. |
IssuedWarning |
Counter |
Incremented when the feature encounters a non-fatal error while executing. |
FailedDuringExecution |
Counter |
Incremented when the feature encounters a fatal error while executing. |
TimedOut |
Counter |
Incremented when the feature does not finish executing within a reasonable time frame. |
RemoteUpdateRequired |
Counter |
Incremented when the feature determines that a remote update is required. |
RemoteUpdateNotRequired |
Counter |
Incremented when the feature determines that a remote update is not required. |
SentRemoteUpdate |
Counter |
Incremented when the feature sends a remote update to the remote party. |
RemoteUpdateSuccess |
Counter |
Incremented when the feature receives a success response for the remote update request. |
RemoteUpdateError |
Counter |
Incremented when the feature receives a failure response for the remote update request. |
RemoteUpdate491Retry |
Counter |
Incremented when the feature receives a 491 response with an |
CallAnsweredWith200 |
Counter |
Incremented when the feature sends a success response for the handover INVITE on the new access leg. |
ReleasedOldAccessLeg |
Counter |
Incremented when the feature releases the old access leg. |
LinkedNewAccessLegToRemoteLeg |
Counter |
Incremented when the feature links the new access leg to the remote leg. |
AccessTransferAttempted |
Counter |
Incremented when the feature attempts an access transfer. |
TerminatedSession |
Counter |
Incremented when the feature terminates the session due to an error during access transfer. |
AccessTransferComplete |
Counter |
Incremented when the access transfer process is complete, after the ACK is received by the feature on the new access leg. |
TimerStarted |
Counter |
Incremented when the retry timer is started by the feature. |
TimerFired |
Counter |
Incremented when the retry timer fires and triggers the feature. |
TimerCancelled |
Counter |
Incremented when the retry timer is cancelled by the feature. |
MaskedInviteEvent |
Counter |
Incremented when the feature masks delivery of further INVITE events on the new access leg. |
UnmaskedInviteEvent |
Counter |
Incremented when the feature unmasks delivery of further INVITE events on the new access leg. |
FailedToImportNewAccessLeg |
Counter |
Incremented when the feature fails to import the new access leg into the session. |
FailedToDetermineIfRemoteUpdateRequired |
Counter |
Incremented when the feature cannot determine whether a remote update is required. |
LegManagementError |
Counter |
Incremented when the feature fails to link/unlink new and old access legs to/from the remote leg. |
FailedToCreateAnswerForHandoverInvite |
Counter |
Incremented when the feature fails to create a response to a handover INVITE request when a remote update is not required. |
FailedToForwardAnswerForHandoverInvite |
Counter |
Incremented when the feature fails to forward a response to a handover INVITE request after a remote update is completed. |
FailedToSendRemoteUpdate |
Counter |
Incremented when the feature needs to send a remote update request, but cannot do so because of an internal error. |
RemoteUpdateRefused |
Counter |
Incremented when the remote party rejects a remote update request. |
RemotePartyDisconnected |
Counter |
Incremented when the remote party ends the call while a remote update is in progress. |
MediaInterruption0to50ms |
Counter |
Incremented when a re-INVITE to the remote party is accepted 0 to 50ms after being sent. |
MediaInterruption51to100ms |
Counter |
Incremented when a re-INVITE to the remote party is accepted 51 to 100ms after being sent. |
MediaInterruption101to150ms |
Counter |
Incremented when a re-INVITE to the remote party is accepted 101 to 150ms after being sent. |
MediaInterruption151to200ms |
Counter |
Incremented when a re-INVITE to the remote party is accepted 151 to 200ms after being sent. |
MediaInterruption201to250ms |
Counter |
Incremented when a re-INVITE to the remote party is accepted 201 to 250ms after being sent. |
MediaInterruption251to300ms |
Counter |
Incremented when a re-INVITE to the remote party is accepted 251 to 300ms after being sent. |
MediaInterruption301to350ms |
Counter |
Incremented when a re-INVITE to the remote party is accepted 301 to 350ms after being sent. |
MediaInterruption351to400ms |
Counter |
Incremented when a re-INVITE to the remote party is accepted 351 to 400ms after being sent. |
MediaInterruption401to450ms |
Counter |
Incremented when a re-INVITE to the remote party is accepted 401 to 450ms after being sent. |
MediaInterruption451to500ms |
Counter |
Incremented when a re-INVITE to the remote party is accepted 451 to 500ms after being sent. |
MediaInterruptionMoreThan500ms |
Counter |
Incremented when a re-INVITE to the remote party is accepted more than 500ms after being sent. |
SCCOriginatingPreAnswerSessionTransfer
SCCOriginatingPreAnswerSessionTransfer statistics are tracked by the sentinel.volte.sip SBB
and can be found under the following parameter set in REM:
SLEE-Usage → sentinel.volte.sip service → sentinel.volte.sip SBB → feature → SCCOriginatingPreAnswerSessionTransfer
or with rhino-stats:
"SLEE-Usage.Services.ServiceID[name=sentinel.volte.sip,vendor=OpenCloud,version=4.0.0].SbbID[name=sentinel.volte.sip,vendor=OpenCloud,version=4.0.0].feature.SCCOriginatingPreAnswerSessionTransfer"
| Parameter | Type | Description |
|---|---|---|
Started |
Counter |
Incremented each time the feature runs. |
FailedToStart |
Counter |
Incremented when Sentinel VoLTE encounters an error while attempting to start the feature. |
IssuedWarning |
Counter |
Incremented when the feature encounters a non-fatal error while executing. |
FailedDuringExecution |
Counter |
Incremented when the feature encounters a fatal error while executing. |
TimedOut |
Counter |
Incremented when the feature does not finish executing within a reasonable time frame. |
AccessTransferSuccessful |
Counter |
Incremented when the ACK to the 2xx-INVITE due to ATU-STI or STN-SR is received by the feature. |
AccessTransferAborted |
Counter |
Incremented when access transfer procedures are aborted before the transfer is complete. |
AccessTransferAbortedUsingUpdate |
Counter |
Incremented when the feature aborts access transfer procedures while a remote update using a SIP UPDATE request is in progress. |
AccessTransferAbortedUsingPrack |
Counter |
Incremented when the feature aborts access transfer procedures while a remote update using a SIP PRACK request is in progress. |
AccessTransferAbortedUsingInvite |
Counter |
Incremented when the feature aborts access transfer procedures while a remote update using a SIP INVITE request is in progress. |
SentRemoteUpdateUsingUpdate |
Counter |
Incremented when the feature attempts a remote update using an UPDATE message. |
SentRemoteUpdateUsingPrack |
Counter |
Incremented when the feature attempts a remote update using a PRACK message. |
SentRemoteUpdateUsingInvite |
Counter |
Incremented when the feature attempts a remote update using a reINVITE message. |
OrigPreAlertingTransferAttempted |
Counter |
Incremented when the feature attempts an access transfer from a pre-alerting call state. |
OrigPreAlertingTransferSuccessful |
Counter |
Incremented when the feature successfully completes an access transfer from a pre-alerting call state. |
OrigPreAlertingTransferFailed |
Counter |
Incremented when the feature fails to complete an access transfer from a pre-alerting call state. |
OrigAlertingTransferAttempted |
Counter |
Incremented when the feature attempts an access transfer from an alerting call state. |
OrigAlertingTransferSuccessful |
Counter |
Incremented when the feature successfully completes an access transfer from an alerting call state. |
OrigAlertingTransferFailed |
Counter |
Incremented when the feature fails to complete an access transfer from an alerting call state. |
MaskedInviteEvent |
Counter |
Incremented when the feature masks delivery of further INVITE events on the new access leg. |
UnmaskedInviteEvent |
Counter |
Incremented when the feature unmasks delivery of further INVITE events on the new access leg. |
SCCTerminatingPreAnswerSessionTransfer
SCCTerminatingPreAnswerSessionTransfer statistics are tracked by the sentinel.volte.sip SBB
and can be found under the following parameter set in REM:
SLEE-Usage → sentinel.volte.sip service → sentinel.volte.sip SBB → feature → SCCTerminatingPreAnswerSessionTransfer
or with rhino-stats:
"SLEE-Usage.Services.ServiceID[name=sentinel.volte.sip,vendor=OpenCloud,version=4.0.0].SbbID[name=sentinel.volte.sip,vendor=OpenCloud,version=4.0.0].feature.SCCTerminatingPreAnswerSessionTransfer"
| Parameter | Type | Description |
|---|---|---|
Started |
Counter |
Incremented each time the feature runs. |
FailedToStart |
Counter |
Incremented when Sentinel VoLTE encounters an error while attempting to start the feature. |
IssuedWarning |
Counter |
Incremented when the feature encounters a non-fatal error while executing. |
FailedDuringExecution |
Counter |
Incremented when the feature encounters a fatal error while executing. |
TimedOut |
Counter |
Incremented when the feature does not finish executing within a reasonable time frame. |
AccessTransferSuccessful |
Counter |
Incremented when the ACK to the 2xx-INVITE due to ATU-STI or STN-SR is received by the feature. |
AccessTransferAborted |
Counter |
Incremented when the feature aborts access transfer procedures before the transfer is complete. |
AbortedDuringRemoteUpdateUsingUpdate |
Counter |
Incremented when the feature aborts access transfer procedures while a remote update using a SIP UPDATE request is in progress. |
AbortedDuringRemoteUpdateUsingInvite |
Counter |
Incremented when the feature aborts access transfer procedures while a remote update using a SIP INVITE request is in progress. |
SentPost405Update183 |
Counter |
Incremented when the feature sends a 183 response to the MSC after a 405 response is received for an UPDATE. |
SentRemoteReInvite |
Counter |
Incremented when the feature attempts a remote update using a reINVITE. |
SentRemoteUpdate |
Counter |
Incremented when the feature attempts a remote update using an UPDATE. |
SentPostUpdate183 |
Counter |
Incremented when the feature sends a 183 response to the MSC following an UPDATE-200 to the originating party. |
SentInfoOnNewAccessLeg |
Counter |
Incremented when the feature sends an INFO to the MSC as part of an Access Transfer. |
SentForked183Response |
Counter |
Incremented when the feature sends a forked 183 response following an UPDATE-200 with different SDP from the access transfer request. |
SentImmediate183 |
Counter |
Incremented when an access transfer does not trigger an UPDATE to the originating party and the feature immediately sends a 183 to the MSC. |
TermAlertingTransferAttempted |
Counter |
Incremented when the feature attempts an access transfer from an alerting call state. |
TermAlertingTransferSuccessful |
Counter |
Incremented when the feature successfully completes an access transfer from an alerting call state. |
TermAlertingTransferFailed |
Counter |
Incremented when the feature fails to complete an access transfer from an alerting call state. |
MaskedInviteEvent |
Counter |
Incremented when the feature masks delivery of further INVITE events on the new access leg. |
UnmaskedInviteEvent |
Counter |
Incremented when the feature unmasks delivery of further INVITE events on the new access leg. |
SCCDetermineTransferableSet
SCCDetermineTransferableSet statistics are tracked by the sentinel.volte.sip SBB
and can be found under the following parameter set in REM:
SLEE-Usage → sentinel.volte.sip service → sentinel.volte.sip SBB → feature → SCCDetermineTransferableSet
or with rhino-stats:
"SLEE-Usage.Services.ServiceID[name=sentinel.volte.sip,vendor=OpenCloud,version=4.0.0].SbbID[name=sentinel.volte.sip,vendor=OpenCloud,version=4.0.0].feature.SCCDetermineTransferableSet"
| Name | Description |
|---|---|
Started |
Incremented each time the feature runs |
FailedToStart |
Incremented when a fatal error occurs before feature execution |
IssuedWarning |
Incremented when a non-fatal error occurs during feature execution |
FailedDuringExecution |
Incremented when a fatal error occurs during feature execution |
TimedOut |
Incremented when feature execution does not complete within a reasonable time frame |
SessionOwnershipQuery |
Incremented when the feature sends a query to the session ownership facility |
SessionOwnershipError |
Incremented when a TrackedDialogKeys lookup fails with a Session Ownership error |
SessionOwnershipSuccess |
Incremented when a TrackedDialogKeys lookup returns successfully |
SessionOwnershipNoDataFound |
Incremented when no matching tracked dialog keys entries were found in the session ownership facility |
FoundTrackedSession |
Incremented when the feature successfully finds a Session Ownership Record resulting from a TrackedSession |
SavedSessionToTransfer |
Incremented when the feature saves the most recently active TrackedSession to session state |
SavedSuperfluousSessions |
Incremented when the feature saves all of the remaining TrackedSession’s to session state |
SessionOwnershipAsyncQueryTimeSuccess |
Samples the elapsed time between starting a query and a success response arriving from the session ownership facility |
SessionOwnershipAsyncQueryTimeFailure |
Samples the elapsed time between starting a query and a failure response arriving from the session ownership facility |
