What are SS7 SGC statistics?

Statistics are usage, status, and health information exposed by the SS7 SGC stack. Each layer of the SS7 SGC stack exposes a set of statistics that provide insight into the current operational state of the cluster. The statistics data is available cluster-wide, independent of which particular node happens to be responsible for gathering a particular set of statistics.

Warning
Statistics update interval

To maximize performance, statistics exposed by SGC cluster nodes are updated periodically (every 1 second). So any management tools pooling SGC statistics should use a pooling interval that is > 1s.

The SGC statistics subsystem collects multiple types of statistical data, which can be separated in two broad categories:

  • frequently updated statistic data types:

    • counter — monotonically increasing integer values; for example the number of received messages

    • gauge — the amount of a particular object or item, which can increase and decrease within some arbitrary bound, typically between 0 and some positive number; for example, the number of processing threads in a worker group.

  • character values that can change infrequently or not at all; these include:

    • identifying information — usually a name of an object for which a set of statistics is gathered; for example, the name of a node

    • status information — information about the state of a given configuration object; for example, the SCTP association state ESTABLISHED.

The SGC statistics subsystem is queried using commands exposed by the Command-Line Management Console, which is distributed with SGC SS7 Stack.

Statistics

Below are details of the exposed subsystem-specific statistics:

M3UA

The M3UA layer exposes statistical data about AS, Association, and DPC.

Note The JMX Object name for M3UA statistics is SGC:module=m3ua,type=info

AsInfo

The set of configured Application Servers currently associated with connections.

Statistic Description

RXCount

number of received messages directed to this AS through a particular connection

TXCount

number of sent messages originating from this AS through a particular connection

asId

name of the AS

connectionId

name of the connection

nodeId

name of the node

status

status of this AS as seen through a particular connection
(possible values: INACTIVE, ACTIVE)
Note This information is also exposed through multiple MBeans named SGC:type=info,module=m3ua,elem=AsInfo,id=CONNECTION_NAME&AS_NAME, where id is a concatenation of the relevant connection and AS names.

AssociationInfo

The set of SCTP associations defined within the cluster.

Statistic Description

RXDataCount

number of received M3UA Payload Data Messages

RXErrorCount

number of received M3UA Management Error Messages

RXSctpCount

number of received M3UA Messages

TXDataCount

number of transmitted M3UA Payload Data Messages

TXErrorCount

number of transmitted M3UA Management Error Messages

TXSctpCount

number of transmitted M3UA Messages

connectionId

name of connection

nodeId

name of node

numberOfInStreams

number of input streams

numberOfOutStreams

number of output streams

outQSize

number of messages waiting to be written into SCTP association

peerAddresses

peer IP addresses

sctpOptions

socket options associated with an SCTP channel

status

status of this connection
(possible values: INACTIVE, ESTABLISHED)
Note This information is also exposed through multiple MBeans named SGC:type=info,module=m3ua,associationInfo,id=CONNECTION_NAME, where id is the name of the relevant connection.

DpcInfo

The set of Destination Point Codes that are associated with connections at this point in time.

Statistic Description

ConnectionId

name of connection

Dpc

destination point code

DpcId

name of DPC

Status

status of this DPC
(possible values: ACTIVE, CONGESTED, INACTIVE, RESTRICTED)
Note This information is also exposed through multiple MBeans named SGC:type=info,module=m3ua,dpcInfo,id=CONNECTION_NAME&DPC, where id is a concatenation of the relevant connection name and DPC.

SCCP

The SCCP layer exposes statistic data about the local SSN, GT translation rules (outgoing), PC routing, remote SSN, SCCP messages and SCCP errors.

Note The JMX Object name for SCCP statistics is SGC:module=sccp,type=info

LocalSsnInfo

The set of local SSN; that is, TCAP Stacks (CGIN RAs, scenario simulators) connected to the cluster representing particular SSNs.

Statistic Description

RXCount

number of messages received by the SSN

TXCount

number of messages originated by the SSN

ssn

local SSN

status

status of this SSN
(possible values: PROHIBITED, CONGESTED, ALLOWED)

NUnitdataReqCount

number of N-UNITDATA req primitives received by the SSN

segmentationFailureCount

number of segmentation failures at this SSN

NUnitdataIndCount

number of N-UNITDATA ind primitives received by this SSN

reassembledNUnitdataIndCount

number of reassembled N-UNITDATA ind primitives received by this SSN

reassemblyFailureCount

number of reassembly failures at this SSN
Note This information is also exposed through multiple MBeans named SGC:type=info,module=sccp,elem=LocalSsnInfo,ssn=SSN_NUMBER, where ssn is the value of the relevant local SSN.

OgtInfo

The set of Global Title translation rules currently used for outgoing messages. Different translation rules might be in effect at the same time on different nodes, depending on the prefer-local attribute of the outgoing-gtt configuration object.

The set of currently used translation rules depends on:

  • the priority attribute of the outgoing-gtt configuration object

  • the priority attribute of the route configuration object

  • DPC reachability status (GT translations that result in unreachable DPC are ignored).

Note
Local cluster PC

Entries with an empty connId attribute and an rc attribute value of -1 represent GT translations that result in a PC of the SGC Cluster itself. Messages that are to be routed to a local PC are load balanced among TCAP Stacks within the local cluster.
Tip
See also
Statistic Description

addrInfo

address string

addrType

values of attributes trtype, numplan, natofaddr, and isPrefix, as defined for this rule

connId

name of connection on which messages with matching GT will be transmitted

dpc

destination point code to which messages with matching GT will be transmitted

nodeId

name of the node on which translation rule is used

rc

routing context which will be used when transmitting messages with matching GT

routeNodeId

name of node where SCTP connection is established

PcInfo

The set of associations and RCs across which traffic for a given DPC are currently load balanced by each node.

Note
Local cluster PC

Entries with an empty connId attribute and an rc attribute value of -1 represent nodes of the SGC Cluster itself. Messages that are to be routed to the local DPC are load balanced among TCAP Stacks within the local cluster.
Statistic Description

connId

name of connection on which messages with matching DPC will be transmitted

dpc

destination point code

nodeId

name of node where connection is established

rc

routing context which will be used when transmitting messages with matching DPC

RemoteSsnInfo

The set of remote SSNs for which their status is known.

Statistic Description

dpc

destination point code

ssn

remote SSN

status

status of this SSN
(possible values: PROHIBITED, CONGESTED, ALLOWED)

SccpStats

Statistics for SCCP messages received and sent by local SSN.

Statistic Description

ssn

local SSN

udtSent

number of UDT messages sent by this SSN

udtReceived

number of UDT messages received by this SSN

xudtSent

number of XUDT messages sent by this SSN

xudtReceived

number of XUDT messages received by this SSN

ludtReceived

number of LUDT messages received by this SSN

udtsSent

number of UDTS messages sent by this SSN

udtsReceived

number of UDTS messages received by this SSN

xudtsSent

number of XUDTS messages sent by this SSN

xudtsReceived

number of XUDTS messages received by this SSN

ludtsSent

number of LUDTS messages sent by this SSN

ludtsReceived

number of LUDTS messages received by this SSN

xudtSegmentationSent

number of XUDT messages sent by this SSN with a segmentation parameter

xudtSegmentationReceived

number of XUDT messages received by this SSN with a segmentation parameter

xudtNoSegmentationSent

number of XUDT messages sent by this SSN without a segmentation parameter

xudtNoSegmentationReceived

number of XUDT messages received by this SSN without a segmentation parameter

SccpErrorStats

Statistics for SCCP ReturnCauses received and sent by local SSN.

Statistic Description

ssn

local SSN

noTranslationForAddressOfSuchNatureSent

number of NO_TRANSLATION_FOR_ADDR_OF_SUCH_NATURE SCCP return causes sent by this SSN

noTranslationForThisSpecificAddress

number of NO_TRANSLATION_FOR_SPECIFIC_ADDR SCCP return causes sent by this SSN

subsystemCongestionSent

number of SUBSYSTEM_CONGESTION SCCP return causes sent by this SSN

subsystemFailureSent

number of SUBSYSTEM_FAILURE SCCP return causes sent by this SSN

unequippedUserSent

number of UNEQUIPPED_USER SCCP return causes sent by this SSN

mtpFailureSent

number of MTP_FAILURE SCCP return causes sent by this SSN

networkCongestionSent

number of NETWORK_CONGESTION SCCP return causes sent by this SSN

unqualifiedSent

number of UNQUALIFIED SCCP return causes sent by this SSN

errorInMessageTransportSent

number of ERROR_IN_MESSAGE_TRANSPORT SCCP return causes sent by this SSN

destinationCannotPerformReassemblySent

number of DESTINATION_CANNOT_PERFORM_REASSEMBLY SCCP return causes sent by this SSN

sccpFailureSent

number of SCCP_FAILURE SCCP return causes sent by this SSN

hopCounterViolationSent

number of HOP_COUNTER_VIOLATION SCCP return causes sent by this SSN

segmentationNotSupportedSent

number of SEGMENTATION_NOT_SUPPORTED SCCP return causes sent by this SSN

segmentationFailureSent

number of SEGMENTATION_FAILURE SCCP return causes sent by this SSN

otherSent

number of other SCCP return causes sent by this SSN

noTranslationForAddressOfSuchNatureReceived

number of NO_TRANSLATION_FOR_ADDR_OF_SUCH_NATURE SCCP return causes received by this SSN

noTranslationForThisSpecificAddress

number of NO_TRANSLATION_FOR_SPECIFIC_ADDR SCCP return causes received by this SSN

subsystemCongestionReceived

number of SUBSYSTEM_CONGESTION SCCP return causes received by this SSN

subsystemFailureReceived

number of SUBSYSTEM_FAILURE SCCP return causes received by this SSN

unequippedUserReceived

number of UNEQUIPPED_USER SCCP return causes received by this SSN

mtpFailureReceived

number of MTP_FAILURE SCCP return causes received by this SSN

networkCongestionReceived

number of NETWORK_CONGESTION SCCP return causes received by this SSN

unqualifiedReceived

number of UNQUALIFIED SCCP return causes received by this SSN

errorInMessageTransportReceived

number of ERROR_IN_MESSAGE_TRANSPORT SCCP return causes received by this SSN

destinationCannotPerformReassemblyReceived

number of DESTINATION_CANNOT_PERFORM_REASSEMBLY SCCP return causes received by this SSN

sccpFailureReceived

number of SCCP_FAILURE SCCP return causes received by this SSN

hopCounterViolationReceived

number of HOP_COUNTER_VIOLATION SCCP return causes received by this SSN

segmentationNotSupportedReceived

number of SEGMENTATION_NOT_SUPPORTED SCCP return causes received by this SSN

segmentationFailureReceived

number of SEGMENTATION_FAILURE SCCP return causes received by this SSN

otherReceived

number of other SCCP return causes received by this SSN

TCAP

The TCAP layer exposes statistics data about connected TCAP Stacks.

Note The JMX Object name for TCAP statistics is SGC:module=tcap,type=info

TcapConnInfo

The set of connected TCAP stacks (such as the CGIN RA).

Statistic Description

QSize

number of messages waiting to be written into the TCP connection

RXCount

number of messages directed from SGC to TCAP stack

TXCount

number of messages directed from TCAP stack to SGC

connectTime

time and date when connection was established

localIp

local SGC IP used by connection

localPort

local SGC port used by connection

prefix

transaction prefix assigned to TCAP stack

remoteIp

IP from which TCAP stack originated connection to SGC

remotePort

port from which TCAP stack originated connection to SGC

serviceNodeId

node name to which TCAP stack is connected

ssn

SSN that TCAP stack is representing
Note This information is also exposed through multiple MBeans named SGC:type=info,module=tcap,elem=TcapConnInfo,ssn=SSN_NUMBER,prefix=ASSIGNED_PREFIX, where ssn is the SSN represented by the connected TCAP stack, and prefix is the transaction-ID prefix assigned to the connected TCAP stack.

TcapStats

Statistics for TCAP messages sent and received by the local SSN.

Statistic Description

ssn

local SSN

beginSent

number of TC-BEGIN messages sent by the SSN

beginReceived

number of TC-BEGIN messages received by the SSN

continueSent

number of TC-CONTINUE messages sent by the SSN

continueReceived

number of TC-CONTINUE messages received by the SSN

endSent

number of TC-END messages sent by the SSN

endReceived

number of TC-END messages received by the SSN

abortSent

number of TC-ABORT messages sent by the SSN

abortReceived

number of TC-ABORT messages received by the SSN

uniSent

number of TC-UNI messages sent by the SSN

uniReceived

number of TC-UNI messages received by the SSN

TcapErrorStats

Statistics for TCAP processing errors by SSN.

Statistic Description

ssn

local SSN

unrecognizedTransactionId

number of UNRECOGNIZED_TRANSACTION_ID errors generated within the SGC’s TCAP stack for this SSN

ssnNotFound

number of SSN_NOT_FOUND errors generated within the SGC’s TCAP stack for this SSN

resourceLimitation

number of RESOURCE_LIMITATION errors generated within the SGC’s TCAP stack for this SSN

decodeFailure

number of DECODE_FAILURE errors generated within the SGC`s TCAP stack for this SSN

TOP

The SGC node processing-load statistics information.

Note The JMX Object name for TOP statistics is SGC:module=top,type=info

HealthInfo

The set of current load-processing statistics for nodes in the cluster.

Statistic Description

allocatedIndTasks

number of allocated task objects, each of which represents an incoming message that may be processing or waiting to be processed

allocatedReqTasks

number of allocated task objects, each of which represents an outgoing message that may be processing or waiting to be processed

contextExecutionCount

cumulative number of tasks representing incoming or outgoing messages that have finished processing

contextExecutionTime

cumulative wall-clock time in milliseconds that tasks representing incoming or outgoing messages were in the allocated state

executorQueueSize

number of background tasks mainly related to the SCCP management state, queued for execution nodeId name of node

workerExecutionCount

cumulative number of tasks (for incoming or outgoing messages) processed by worker threads

workerExecutionTime

cumulative wall-clock time in miliseconds spent by worker threads processing tasks (for incoming or outgoing messages)

workerGroupSize

number of worker threads used to process tasks (for incoming or outgoing messages)

forceAllocatedIndTasks

cumulative number of task objects that had to be force allocated (i.e. not from the task pool) in order to process incoming messages

forceAllocatedReqTasks

cumulative number of task objects that had to be forced allocated (i.e. not from the task pool) in order to process outgoing messages
Previous page Next page