General Configuration

oname

object name

CommSwitch is the Protocol Data Transport cluster communication subsystem that is used to transport M3UA and TCAP protocol messages between cluster nodes.

dependencies
_{Read only}

number of items which depend on this object

enabled
_{Reconfigurable / Active reconfiguration}

is object enabled

false

active
_{Read only}

is object active

switch-local-address
_{Reconfigurable}

local address for CommSwitch to bind to

switch-port

local port for CommSwitch to bind to

9701

stack-data-address
_{Reconfigurable}

interface where stack can connect for data connection

The TCAP Stack that is bundled with CGIN RA will use this connection to originate and receive TCAP messages.

value of stack-http-address if defined, otherwise value of switch-local-address

stack-data-port
_{Reconfigurable}

port where stack can connect for data connection

The TCAP Stack that is bundled with CGIN RA will use this connection to originate and receive TCAP messages.

9703

stack-http-address
_{Reconfigurable}

interface where stack can get balancing information

The TCAP Stack that is bundled with CGIN RA will use this connection to to register with the SGC node.

value of stack-data-address if defined, otherwise value of switch-local-address

stack-http-port
_{Reconfigurable}

port where stack can get balancing information

The TCAP Stack that is bundled with CGIN RA will use this connection to to register with the SGC node.

9702

local-configuration
_{Read only}

node configuration

Specifies values of properties that can be defined in the SGC.properties file.

class1-resend-delay
_{Reconfigurable}

delay (in milliseconds) before a class1 message is re-sent when route failure is detected

1000

sp
_{Reconfigurable}

ocal signalling point; a 14-bit integer; supported formats: simple integer (4106) or int(3bit)-int(8bit)-int(3bit) (2-1-2)

0

sp-state
_{Reconfigurable}

local signalling point state (OK/RESTRICTED/DOWN/CONG0/CONG1/CONG2)

OK

ni
_{Reconfigurable}

network indicator (INTERNATIONAL/SPARE/NATIONAL/RESERVED)

INTERNATIONAL

sccp-sst-interval
_{Reconfigurable}

interval (in milliseconds) between sent SST messages

10000

sccp-timer-td
_{Reconfigurable}

decay timer (in milliseconds) for SCCP congestion procedure
(Q.714 section 5.2.8 SCCP management congestion reports procedure)

10000

sccp-timer-ta
_{Reconfigurable}

attack timer (in milliseconds) for SCCP congestion procedure
(Q.714 section 5.2.8 SCCP management congestion reports procedure)

600

sccp-max-rsl-m
_{Reconfigurable}

maximum restriction sublevel per restriction level (Q.714 section 5.2.8 SCCP management congestion reports procedure)

4

sccp-max-rl-m
_{Reconfigurable}

maximum restriction level for each affected SP
(Q.714 section 5.2.8 SCCP management congestion reports procedure)

8

sccp-timer-tconn
_{Reconfigurable}

timer (in milliseconds) for congestion abatement

10000

ntfy-m3ua-err
_{Reconfigurable}

time interval (in seconds) between successive notifications sent
when the M3Ua layer is unable to process incoming messages

600

ntfy-sccp-err
_{Reconfigurable}

time interval (in seconds) between successive notifications sent
when the SCCP layer is unable to process incoming messages

60

ntfy-tcap-err
_{Reconfigurable}

time interval (in seconds) between successive notifications sent
when the TCAP layer is unable to process incoming messages

60

sccp-timer-reassembly
_{Reconfigurable}

reassembly timeout for SCCP reassembly procedure in milliseconds

2000

sccp-max-reassembly-processes
_{Reconfigurable}

maximum number of concurrent SCCP reassembly processes that may be active.
0 = reassembly not supported.

10000