General IM-SSF Configuration

imssf-displaygeneralcfg
     Display general configuration of the IM-SSF

[Rhino@localhost (#1)] imssf-displaygeneralcfg
IM-SSF Configuration Data
addPAssertIDHeader                            : false
autoPopulateInitialDP                         : false
bNumberPrefixListForOAccess                   : 0800,0900
confirmedInviteErrorResponse                  : 487
...

imssf-activate <true/false>
     Activate the IM-SSF (true=activate/false=deactivate)

[Rhino@localhost (#1)] imssf-activate true
The IM-SSF has been activated

imssf-configurebnumberprefixes <prefixes>
     Provision the prefixes the IM-SSF will use to check the B number
     for, to see if it will be used to lookup O-CSI on an originating
     trigger. E.g: '0800,0900'

[Rhino@localhost (#1)] imssf-configurebnumberprefixes 0800,0900
B Number prefixes now set to: 0800,0900

imssf-configureoriginatingaccess <parameter-name> (<parameter-value>)
     Configure the parameter the IM-SSF uses to classify an incoming
     INVITE as originating access. Some operators use the presence of
     a parameter only (i.e it is originating if the parameter is
     there, otherwise terminating). Other operators always include a
     parameter, and use a particular parameter value (i.e it is
     originating or terminating depending on the parameter value).

[Rhino@localhost (#1)] imssf-configureoriginatingaccess call orig
Method to determine originating access updated: look for the parameter 'call' with value 'orig'

imssf-configurecountrycode <country-code>
     Set the coutry code

[Rhino@localhost (#1)] imssf-configurecountrycode 64
Country code now set to: 64

imssf-configureinternationaldiallingprefix <idd>
     Set the international dialling prefix

[Rhino@localhost (#1)] imssf-configureinternationaldiallingprefix 00
International dialling prefix now set to: 00

imssf-configurescptimeout <timeout>
     Set the SCP response timeout (in ms). The IM-SSF
     treats the SCP as failed if it does not respond
     to an InitialDP within this timeout

[Rhino@localhost (#1)] imssf-configurescptimeout 500
SCP timeout set to 500ms

imssf-configuresiperrorresponsecodes  <confirmed INVITE error code>
        <unconfirmed INVITE error code>
        <unconfirmed INVITE, after early media, error code>
     Configure the sip error response codes to use when send an error
     response in relation to the incoming INVITE. SIP error response
     codes can be provisioned for three scenarios: for a confirmed
     INVITE, for an unconfirmed INVITE and for an unconfirmed INVITE
     where early media has played. Some operators prefer to use the
     same error response code in all situations, some prefer to
     distinguish the case where early media is involved

[Rhino@localhost (#1)] imssf-configuresiperrorresponsecodes 487 606 606
Sip error response codes configured
	Confirmed INVITE                     : 487
	Unconfirmed INVITE                   : 606
	Unconfirmed INVITE, after early media: 606

imssf-enableaddpassertidheader <true/false>
     Enable the automatic additional of P-Assert-ID headers if
     the From address is changed by the IM-SSF

[Rhino@localhost (#1)] imssf-enableaddpassertidheader true
Adding of a P-Assert-ID header if the From address changes has been turned on

imssf-enableautopopulateinitialdp <true/false>
     Turn on the auto-populate-initialDP feature

[Rhino@localhost (#1)] imssf-enableautopopulateinitialdp true
The auto-populate-initialDP features has been turned on

imssf-configureautopopulateinitialdpdefaults <msc address> <mcc>
         <mnc> <location number>
     Set the default values to apply for the autopopulated feauture.
     These defaults are all related to CAMEL. MscAddress is the
     address string to include in the MSCAddress parameter in CAMEL
     triggers. MCC (mobile country code) and MNC (mob network code)
     are used build a default imsi and in location related paramters.
     Location number is the address string used in the LocationNumber
     parameter.

[Rhino@localhost (#1)] imssf-configureautopopulateinitialdpdefaults 6413456768 530 4 64495750394
The auto-populate-initialDP related defaults have been set:
	CAP MSC Address : 6413456768
	MCC             : 530
	MNC             : 4
	Location Address: 64495750394

 imssf-enableupdatefromdisplayname <true/false>
     Enable update of the From address display name based on the
     Connect received from the SCP

[Rhino@localhost (#1)] imssf-enableupdatefromdisplayname true
Update of the From address display name based on response from the SCP has been turned on

imssf-enableaddorigtag <true/false>
     Enable adding an orig tag to outgoing retargeted INVITE requests

[Rhino@localhost (#1)] imssf-enableaddorigtag true
Adding of an orig tag to outgoing retargeted INVITE requests has been turned on