Modifier and Type | Class and Description |
---|---|
class |
NoPeersAvailableException |
class |
RouteException |
Modifier and Type | Method and Description |
---|---|
void |
AccountingServerSessionActivity.sendAccountingAnswer(AccountingAnswer accountingAnswer)
Send an Accounting Answer.
|
void |
AccountingClientSessionActivity.sendAccountingRequest(AccountingRequest accountingRequest)
Send an Accounting Request.
|
void |
DiameterActivity.sendMessage(DiameterMessage message)
Sends the given DiameterMessage on the DiameterActivity.
|
DiameterMessage |
DiameterProvider.sendSyncRequest(DiameterMessage message)
Synchronously send a Diameter request and block until a response is received.
|
Modifier and Type | Method and Description |
---|---|
CreditControlAnswer |
DiameterCcaProvider.eventCreditControlRequest(CreditControlRequest ccr)
Send a Credit-Control-Request message to the appropriate peers, and block
until the response is received then return it.
|
CreditControlAnswer |
DiameterCcaProvider.initialCreditControlRequest(CreditControlRequest ccr)
Send an initial Credit-Control-Request that will start a credit control session,
and block until the answer is received.
|
void |
CreditControlClientSessionActivity.sendAbortSessionAnswer(AbortSessionAnswer asa)
Send a Abort-Session-Answer message.
|
void |
CreditControlServerSessionActivity.sendAbortSessionRequest(AbortSessionRequest asr)
Send a Abort-Session-Request message to the CC client.
|
void |
CreditControlServerSessionActivity.sendCreditControlAnswer(CreditControlAnswer cca)
Send a Credit-Control-Answer message to the CC client.
|
void |
CreditControlClientSessionActivity.sendEventCreditControlRequest(CreditControlRequest ccr)
Send an event Credit-Control-Request.
|
void |
CreditControlClientSessionActivity.sendInitialCreditControlRequest(CreditControlRequest ccr)
Send an initial Credit-Control-Request.
|
void |
CreditControlClientSessionActivity.sendReAuthAnswer(ReAuthAnswer raa)
Send a Re-Auth-Answer message.
|
void |
CreditControlServerSessionActivity.sendReAuthRequest(ReAuthRequest rar)
Send a Re-Auth-Request message to the CC client.
|
void |
CreditControlClientSessionActivity.sendTerminationCreditControlRequest(CreditControlRequest ccr)
Send a termination Credit-Control-Request.
|
void |
CreditControlClientSessionActivity.sendUpdateCreditControlRequest(CreditControlRequest ccr)
Send an update (intermediate) Credit-Control-Request.
|
CreditControlAnswer |
DiameterCcaProvider.terminationCreditControlRequest(CreditControlRequest ccr)
Send a termination Credit-Control-Request and block until the answer
is received.
|
CreditControlAnswer |
DiameterCcaProvider.updateCreditControlRequest(CreditControlRequest ccr)
Send an update (intermediate) Credit-Control-Request and block until the answer
is received.
|
Modifier and Type | Method and Description |
---|---|
CreditControlAnswer |
DiameterGxProvider.eventCreditControlRequest(CreditControlRequest ccr)
Send a Credit-Control-Request message to the appropriate peers, and block
until the response is received then return it.
|
CreditControlAnswer |
DiameterGxProvider.initialCreditControlRequest(CreditControlRequest ccr)
Send an initial Credit-Control-Request that will start a credit control session,
and block until the answer is received.
|
void |
GxServerSessionActivity.sendCreditControlAnswer(CreditControlAnswer cca)
Send a Credit-Control-Answer message to the CC client.
|
void |
GxClientSessionActivity.sendEventCreditControlRequest(CreditControlRequest ccr)
Send an event Credit-Control-Request.
|
void |
GxClientSessionActivity.sendInitialCreditControlRequest(CreditControlRequest ccr)
Send an initial Credit-Control-Request.
|
void |
GxClientSessionActivity.sendReAuthAnswer(ReAuthAnswer rar)
Send a Re-Auth-Answer message.
|
void |
GxServerSessionActivity.sendReAuthRequest(ReAuthRequest rar)
Send a Re-Auth-Request message to the CC client.
|
void |
GxClientSessionActivity.sendTerminationCreditControlRequest(CreditControlRequest ccr)
Send a termination Credit-Control-Request.
|
void |
GxClientSessionActivity.sendUpdateCreditControlRequest(CreditControlRequest ccr)
Send an update (intermediate) Credit-Control-Request.
|
CreditControlAnswer |
DiameterGxProvider.terminationCreditControlRequest(CreditControlRequest ccr)
Send a termination Credit-Control-Request and block until the answer
is received.
|
CreditControlAnswer |
DiameterGxProvider.updateCreditControlRequest(CreditControlRequest ccr)
Send an update (intermediate) Credit-Control-Request and block until the answer
is received.
|
Modifier and Type | Method and Description |
---|---|
CreditControlAnswer |
DiameterGxProvider.eventCreditControlRequest(CreditControlRequest ccr)
Send a Credit-Control-Request message to the appropriate peers, and block
until the response is received then return it.
|
CreditControlAnswer |
DiameterGxProvider.initialCreditControlRequest(CreditControlRequest ccr)
Send an initial Credit-Control-Request that will start a credit control session,
and block until the answer is received.
|
void |
GxServerSessionActivity.sendCreditControlAnswer(CreditControlAnswer cca)
Send a Credit-Control-Answer message to the CC client.
|
void |
GxClientSessionActivity.sendEventCreditControlRequest(CreditControlRequest ccr)
Send an event Credit-Control-Request.
|
void |
GxClientSessionActivity.sendInitialCreditControlRequest(CreditControlRequest ccr)
Send an initial Credit-Control-Request.
|
void |
GxClientSessionActivity.sendReAuthAnswer(ReAuthAnswer rar)
Send a Re-Auth-Answer message.
|
void |
GxServerSessionActivity.sendReAuthRequest(ReAuthRequest rar)
Send a Re-Auth-Request message to the CC client.
|
void |
GxClientSessionActivity.sendTerminationCreditControlRequest(CreditControlRequest ccr)
Send a termination Credit-Control-Request.
|
void |
GxClientSessionActivity.sendUpdateCreditControlRequest(CreditControlRequest ccr)
Send an update (intermediate) Credit-Control-Request.
|
CreditControlAnswer |
DiameterGxProvider.terminationCreditControlRequest(CreditControlRequest ccr)
Send a termination Credit-Control-Request and block until the answer
is received.
|
CreditControlAnswer |
DiameterGxProvider.updateCreditControlRequest(CreditControlRequest ccr)
Send an update (intermediate) Credit-Control-Request and block until the answer
is received.
|
Modifier and Type | Method and Description |
---|---|
CreditControlAnswer |
DiameterGxProvider.eventCreditControlRequest(CreditControlRequest ccr)
Send a Credit-Control-Request message to the appropriate peers, and block
until the response is received then return it.
|
CreditControlAnswer |
DiameterGxProvider.initialCreditControlRequest(CreditControlRequest ccr)
Send an initial Credit-Control-Request that will start a credit control session,
and block until the answer is received.
|
void |
GxServerSessionActivity.sendCreditControlAnswer(CreditControlAnswer cca)
Send a Credit-Control-Answer message to the CC client.
|
void |
GxClientSessionActivity.sendEventCreditControlRequest(CreditControlRequest ccr)
Send an event Credit-Control-Request.
|
void |
GxClientSessionActivity.sendInitialCreditControlRequest(CreditControlRequest ccr)
Send an initial Credit-Control-Request.
|
void |
GxClientSessionActivity.sendReAuthAnswer(ReAuthAnswer rar)
Send a Re-Auth-Answer message.
|
void |
GxServerSessionActivity.sendReAuthRequest(ReAuthRequest rar)
Send a Re-Auth-Request message to the CC client.
|
void |
GxClientSessionActivity.sendTerminationCreditControlRequest(CreditControlRequest ccr)
Send a termination Credit-Control-Request.
|
void |
GxClientSessionActivity.sendUpdateCreditControlRequest(CreditControlRequest ccr)
Send an update (intermediate) Credit-Control-Request.
|
CreditControlAnswer |
DiameterGxProvider.terminationCreditControlRequest(CreditControlRequest ccr)
Send a termination Credit-Control-Request and block until the answer
is received.
|
CreditControlAnswer |
DiameterGxProvider.updateCreditControlRequest(CreditControlRequest ccr)
Send an update (intermediate) Credit-Control-Request and block until the answer
is received.
|
Modifier and Type | Method and Description |
---|---|
AccountingAnswer |
RfProvider.accountingRequest(AccountingRequest accountingRequest)
Send an Accounting Request.
|
void |
RfServerSessionActivity.sendAccountingAnswer(AccountingAnswer accountingAnswer)
Send an Accounting Answer.
|
void |
RfClientSessionActivity.sendAccountingRequest(AccountingRequest accountingRequest)
Send an Accounting Request.
|
Modifier and Type | Method and Description |
---|---|
AccountingAnswer |
RfProvider.accountingRequest(AccountingRequest accountingRequest)
Send an Accounting Request.
|
void |
RfServerSessionActivity.sendAccountingAnswer(AccountingAnswer accountingAnswer)
Send an Accounting Answer.
|
void |
RfClientSessionActivity.sendAccountingRequest(AccountingRequest accountingRequest)
Send an Accounting Request.
|
Modifier and Type | Method and Description |
---|---|
AccountingAnswer |
RfProvider.accountingRequest(AccountingRequest accountingRequest)
Send an Accounting Request.
|
void |
RfServerSessionActivity.sendAccountingAnswer(AccountingAnswer accountingAnswer)
Send an Accounting Answer.
|
void |
RfClientSessionActivity.sendAccountingRequest(AccountingRequest accountingRequest)
Send an Accounting Request.
|
Modifier and Type | Method and Description |
---|---|
AccountingAnswer |
RfProvider.accountingRequest(AccountingRequest accountingRequest)
Send an Accounting Request.
|
void |
RfServerSessionActivity.sendAccountingAnswer(AccountingAnswer accountingAnswer)
Send an Accounting Answer.
|
void |
RfClientSessionActivity.sendAccountingRequest(AccountingRequest accountingRequest)
Send an Accounting Request.
|
Modifier and Type | Method and Description |
---|---|
AccountingAnswer |
RfProvider.accountingRequest(AccountingRequest accountingRequest)
Send an Accounting Request.
|
void |
RfServerSessionActivity.sendAccountingAnswer(AccountingAnswer accountingAnswer)
Send an Accounting Answer.
|
void |
RfClientSessionActivity.sendAccountingRequest(AccountingRequest accountingRequest)
Send an Accounting Request.
|
Modifier and Type | Method and Description |
---|---|
AccountingAnswer |
RfProvider.accountingRequest(AccountingRequest accountingRequest)
Send an Accounting Request.
|
void |
RfServerSessionActivity.sendAccountingAnswer(AccountingAnswer accountingAnswer)
Send an Accounting Answer.
|
void |
RfClientSessionActivity.sendAccountingRequest(AccountingRequest accountingRequest)
Send an Accounting Request.
|
Modifier and Type | Method and Description |
---|---|
AccountingAnswer |
RfProvider.accountingRequest(AccountingRequest accountingRequest)
Send an Accounting Request.
|
void |
RfServerSessionActivity.sendAccountingAnswer(AccountingAnswer accountingAnswer)
Send an Accounting Answer.
|
void |
RfClientSessionActivity.sendAccountingRequest(AccountingRequest accountingRequest)
Send an Accounting Request.
|
Modifier and Type | Method and Description |
---|---|
CreditControlAnswer |
RoProvider.eventCreditControlRequest(CreditControlRequest ccr)
Send a Credit-Control-Request message to the appropriate peers, and block
until the response is received then return it.
|
CreditControlAnswer |
RoProvider.initialCreditControlRequest(CreditControlRequest ccr)
Send an initial Credit-Control-Request that will start a credit control session,
and block until the answer is received.
|
void |
RoClientSessionActivity.sendAbortSessionAnswer(AbortSessionAnswer asa)
Send a Abort-Session-Answer message.
|
void |
RoServerSessionActivity.sendAbortSessionRequest(AbortSessionRequest asr)
Send a Abort-Session-Request message to the peer.
|
void |
RoServerSessionActivity.sendCreditControlAnswer(CreditControlAnswer cca)
Sends a Credit-Control-Answer message to the peer.
|
void |
RoClientSessionActivity.sendEventCreditControlRequest(CreditControlRequest ccr)
Send an event Credit-Control-Request.
|
void |
RoClientSessionActivity.sendInitialCreditControlRequest(CreditControlRequest ccr)
Send an initial Credit-Control-Request.
|
void |
RoClientSessionActivity.sendReAuthAnswer(ReAuthAnswer rar)
Send a Re-Auth-Answer message.
|
void |
RoServerSessionActivity.sendReAuthRequest(ReAuthRequest rar)
Send a Re-Auth-Request message to the peer.
|
void |
RoClientSessionActivity.sendTerminationCreditControlRequest(CreditControlRequest ccr)
Send a termination Credit-Control-Request.
|
void |
RoClientSessionActivity.sendUpdateCreditControlRequest(CreditControlRequest ccr)
Send an update (intermediate) Credit-Control-Request.
|
CreditControlAnswer |
RoProvider.terminationCreditControlRequest(CreditControlRequest ccr)
Send a termination Credit-Control-Request and block until the answer is received.
|
CreditControlAnswer |
RoProvider.updateCreditControlRequest(CreditControlRequest ccr)
Send an update (intermediate) Credit-Control-Request and block until the answer is received.
|
Modifier and Type | Method and Description |
---|---|
CreditControlAnswer |
RoProvider.eventCreditControlRequest(CreditControlRequest ccr)
Send a Credit-Control-Request message to the appropriate peers, and block
until the response is received then return it.
|
CreditControlAnswer |
RoProvider.initialCreditControlRequest(CreditControlRequest ccr)
Send an initial Credit-Control-Request that will start a credit control session,
and block until the answer is received.
|
void |
RoClientSessionActivity.sendAbortSessionAnswer(AbortSessionAnswer asa)
Send a Abort-Session-Answer message.
|
void |
RoServerSessionActivity.sendAbortSessionRequest(AbortSessionRequest asr)
Send a Abort-Session-Request message to the peer.
|
void |
RoServerSessionActivity.sendCreditControlAnswer(CreditControlAnswer cca)
Sends a Credit-Control-Answer message to the peer.
|
void |
RoClientSessionActivity.sendEventCreditControlRequest(CreditControlRequest ccr)
Send an event Credit-Control-Request.
|
void |
RoClientSessionActivity.sendInitialCreditControlRequest(CreditControlRequest ccr)
Send an initial Credit-Control-Request.
|
void |
RoClientSessionActivity.sendReAuthAnswer(ReAuthAnswer rar)
Send a Re-Auth-Answer message.
|
void |
RoServerSessionActivity.sendReAuthRequest(ReAuthRequest rar)
Send a Re-Auth-Request message to the peer.
|
void |
RoClientSessionActivity.sendTerminationCreditControlRequest(CreditControlRequest ccr)
Send a termination Credit-Control-Request.
|
void |
RoClientSessionActivity.sendUpdateCreditControlRequest(CreditControlRequest ccr)
Send an update (intermediate) Credit-Control-Request.
|
CreditControlAnswer |
RoProvider.terminationCreditControlRequest(CreditControlRequest ccr)
Send a termination Credit-Control-Request and block until the answer is received.
|
CreditControlAnswer |
RoProvider.updateCreditControlRequest(CreditControlRequest ccr)
Send an update (intermediate) Credit-Control-Request and block until the answer is received.
|
Modifier and Type | Method and Description |
---|---|
CreditControlAnswer |
RoProvider.eventCreditControlRequest(CreditControlRequest ccr)
Send a Credit-Control-Request message to the appropriate peers, and block
until the response is received then return it.
|
CreditControlAnswer |
RoProvider.initialCreditControlRequest(CreditControlRequest ccr)
Send an initial Credit-Control-Request that will start a credit control session,
and block until the answer is received.
|
void |
RoClientSessionActivity.sendAbortSessionAnswer(AbortSessionAnswer asa)
Send a Abort-Session-Answer message.
|
void |
RoServerSessionActivity.sendAbortSessionRequest(AbortSessionRequest asr)
Send a Abort-Session-Request message to the peer.
|
void |
RoServerSessionActivity.sendCreditControlAnswer(CreditControlAnswer cca)
Sends a Credit-Control-Answer message to the peer.
|
void |
RoClientSessionActivity.sendEventCreditControlRequest(CreditControlRequest ccr)
Send an event Credit-Control-Request.
|
void |
RoClientSessionActivity.sendInitialCreditControlRequest(CreditControlRequest ccr)
Send an initial Credit-Control-Request.
|
void |
RoClientSessionActivity.sendReAuthAnswer(ReAuthAnswer rar)
Send a Re-Auth-Answer message.
|
void |
RoServerSessionActivity.sendReAuthRequest(ReAuthRequest rar)
Send a Re-Auth-Request message to the peer.
|
void |
RoClientSessionActivity.sendTerminationCreditControlRequest(CreditControlRequest ccr)
Send a termination Credit-Control-Request.
|
void |
RoClientSessionActivity.sendUpdateCreditControlRequest(CreditControlRequest ccr)
Send an update (intermediate) Credit-Control-Request.
|
CreditControlAnswer |
RoProvider.terminationCreditControlRequest(CreditControlRequest ccr)
Send a termination Credit-Control-Request and block until the answer is received.
|
CreditControlAnswer |
RoProvider.updateCreditControlRequest(CreditControlRequest ccr)
Send an update (intermediate) Credit-Control-Request and block until the answer is received.
|
Modifier and Type | Method and Description |
---|---|
CreditControlAnswer |
RoProvider.eventCreditControlRequest(CreditControlRequest ccr)
Send a Credit-Control-Request message to the appropriate peers, and block
until the response is received then return it.
|
CreditControlAnswer |
RoProvider.initialCreditControlRequest(CreditControlRequest ccr)
Send an initial Credit-Control-Request that will start a credit control session,
and block until the answer is received.
|
void |
RoClientSessionActivity.sendAbortSessionAnswer(AbortSessionAnswer asa)
Send a Abort-Session-Answer message.
|
void |
RoServerSessionActivity.sendAbortSessionRequest(AbortSessionRequest asr)
Send a Abort-Session-Request message to the peer.
|
void |
RoServerSessionActivity.sendCreditControlAnswer(CreditControlAnswer cca)
Sends a Credit-Control-Answer message to the peer.
|
void |
RoClientSessionActivity.sendEventCreditControlRequest(CreditControlRequest ccr)
Send an event Credit-Control-Request.
|
void |
RoClientSessionActivity.sendInitialCreditControlRequest(CreditControlRequest ccr)
Send an initial Credit-Control-Request.
|
void |
RoClientSessionActivity.sendReAuthAnswer(ReAuthAnswer rar)
Send a Re-Auth-Answer message.
|
void |
RoServerSessionActivity.sendReAuthRequest(ReAuthRequest rar)
Send a Re-Auth-Request message to the peer.
|
void |
RoClientSessionActivity.sendTerminationCreditControlRequest(CreditControlRequest ccr)
Send a termination Credit-Control-Request.
|
void |
RoClientSessionActivity.sendUpdateCreditControlRequest(CreditControlRequest ccr)
Send an update (intermediate) Credit-Control-Request.
|
CreditControlAnswer |
RoProvider.terminationCreditControlRequest(CreditControlRequest ccr)
Send a termination Credit-Control-Request and block until the answer is received.
|
CreditControlAnswer |
RoProvider.updateCreditControlRequest(CreditControlRequest ccr)
Send an update (intermediate) Credit-Control-Request and block until the answer is received.
|
Modifier and Type | Method and Description |
---|---|
CreditControlAnswer |
RoProvider.eventCreditControlRequest(CreditControlRequest ccr)
Send a Credit-Control-Request message to the appropriate peers, and block
until the response is received then return it.
|
CreditControlAnswer |
RoProvider.initialCreditControlRequest(CreditControlRequest ccr)
Send an initial Credit-Control-Request that will start a credit control session,
and block until the answer is received.
|
void |
RoClientSessionActivity.sendAbortSessionAnswer(AbortSessionAnswer asa)
Send a Abort-Session-Answer message.
|
void |
RoServerSessionActivity.sendAbortSessionRequest(AbortSessionRequest asr)
Send a Abort-Session-Request message to the peer.
|
void |
RoServerSessionActivity.sendCreditControlAnswer(CreditControlAnswer cca)
Sends a Credit-Control-Answer message to the peer.
|
void |
RoClientSessionActivity.sendEventCreditControlRequest(CreditControlRequest ccr)
Send an event Credit-Control-Request.
|
void |
RoClientSessionActivity.sendInitialCreditControlRequest(CreditControlRequest ccr)
Send an initial Credit-Control-Request.
|
void |
RoClientSessionActivity.sendReAuthAnswer(ReAuthAnswer rar)
Send a Re-Auth-Answer message.
|
void |
RoServerSessionActivity.sendReAuthRequest(ReAuthRequest rar)
Send a Re-Auth-Request message to the peer.
|
void |
RoClientSessionActivity.sendTerminationCreditControlRequest(CreditControlRequest ccr)
Send a termination Credit-Control-Request.
|
void |
RoClientSessionActivity.sendUpdateCreditControlRequest(CreditControlRequest ccr)
Send an update (intermediate) Credit-Control-Request.
|
CreditControlAnswer |
RoProvider.terminationCreditControlRequest(CreditControlRequest ccr)
Send a termination Credit-Control-Request and block until the answer is received.
|
CreditControlAnswer |
RoProvider.updateCreditControlRequest(CreditControlRequest ccr)
Send an update (intermediate) Credit-Control-Request and block until the answer is received.
|
Modifier and Type | Method and Description |
---|---|
CreditControlAnswer |
RoProvider.eventCreditControlRequest(CreditControlRequest ccr)
Send a Credit-Control-Request message to the appropriate peers, and block
until the response is received then return it.
|
CreditControlAnswer |
RoProvider.initialCreditControlRequest(CreditControlRequest ccr)
Send an initial Credit-Control-Request that will start a credit control session,
and block until the answer is received.
|
void |
RoClientSessionActivity.sendAbortSessionAnswer(AbortSessionAnswer asa)
Send a Abort-Session-Answer message.
|
void |
RoServerSessionActivity.sendAbortSessionRequest(AbortSessionRequest asr)
Send a Abort-Session-Request message to the peer.
|
void |
RoServerSessionActivity.sendCreditControlAnswer(CreditControlAnswer cca)
Sends a Credit-Control-Answer message to the peer.
|
void |
RoClientSessionActivity.sendEventCreditControlRequest(CreditControlRequest ccr)
Send an event Credit-Control-Request.
|
void |
RoClientSessionActivity.sendInitialCreditControlRequest(CreditControlRequest ccr)
Send an initial Credit-Control-Request.
|
void |
RoClientSessionActivity.sendReAuthAnswer(ReAuthAnswer rar)
Send a Re-Auth-Answer message.
|
void |
RoServerSessionActivity.sendReAuthRequest(ReAuthRequest rar)
Send a Re-Auth-Request message to the peer.
|
void |
RoClientSessionActivity.sendTerminationCreditControlRequest(CreditControlRequest ccr)
Send a termination Credit-Control-Request.
|
void |
RoClientSessionActivity.sendUpdateCreditControlRequest(CreditControlRequest ccr)
Send an update (intermediate) Credit-Control-Request.
|
CreditControlAnswer |
RoProvider.terminationCreditControlRequest(CreditControlRequest ccr)
Send a termination Credit-Control-Request and block until the answer is received.
|
CreditControlAnswer |
RoProvider.updateCreditControlRequest(CreditControlRequest ccr)
Send an update (intermediate) Credit-Control-Request and block until the answer is received.
|
Modifier and Type | Method and Description |
---|---|
CreditControlAnswer |
RoProvider.eventCreditControlRequest(CreditControlRequest ccr)
Send a Credit-Control-Request message to the appropriate peers, and block
until the response is received then return it.
|
CreditControlAnswer |
RoProvider.initialCreditControlRequest(CreditControlRequest ccr)
Send an initial Credit-Control-Request that will start a credit control session,
and block until the answer is received.
|
void |
RoClientSessionActivity.sendAbortSessionAnswer(AbortSessionAnswer asa)
Send a Abort-Session-Answer message.
|
void |
RoServerSessionActivity.sendAbortSessionRequest(AbortSessionRequest asr)
Send a Abort-Session-Request message to the peer.
|
void |
RoServerSessionActivity.sendCreditControlAnswer(CreditControlAnswer cca)
Sends a Credit-Control-Answer message to the peer.
|
void |
RoClientSessionActivity.sendEventCreditControlRequest(CreditControlRequest ccr)
Send an event Credit-Control-Request.
|
void |
RoClientSessionActivity.sendInitialCreditControlRequest(CreditControlRequest ccr)
Send an initial Credit-Control-Request.
|
void |
RoClientSessionActivity.sendReAuthAnswer(ReAuthAnswer rar)
Send a Re-Auth-Answer message.
|
void |
RoServerSessionActivity.sendReAuthRequest(ReAuthRequest rar)
Send a Re-Auth-Request message to the peer.
|
void |
RoClientSessionActivity.sendTerminationCreditControlRequest(CreditControlRequest ccr)
Send a termination Credit-Control-Request.
|
void |
RoClientSessionActivity.sendUpdateCreditControlRequest(CreditControlRequest ccr)
Send an update (intermediate) Credit-Control-Request.
|
CreditControlAnswer |
RoProvider.terminationCreditControlRequest(CreditControlRequest ccr)
Send a termination Credit-Control-Request and block until the answer is received.
|
CreditControlAnswer |
RoProvider.updateCreditControlRequest(CreditControlRequest ccr)
Send an update (intermediate) Credit-Control-Request and block until the answer is received.
|
Modifier and Type | Method and Description |
---|---|
ProfileUpdateAnswer |
ShProvider.profileUpdateRequest(ProfileUpdateRequest message)
Sends a synchronous ProfileUpdateRequest which will block until an answer is received from the peer.
|
PushNotificationAnswer |
ShProvider.pushNotificationRequest(PushNotificationRequest message)
Sends a synchronous PushNotificationRequest which will block until an answer is received from the peer.
|
void |
ShServerActivity.sendProfileUpdateAnswer(ProfileUpdateAnswer message)
Send the ProfileUpdateAnswer to the peer that sent the ProfileUpdateRequest.
|
void |
ShClientActivity.sendProfileUpdateRequest(ProfileUpdateRequest message)
Send a Profile-Update-Request message asynchronously.
|
void |
ShClientSubscriptionActivity.sendPushNotificationAnswer(long resultCode,
boolean isExperimentalResultCode)
Convenience method to create and send a PushNotificationAnswer containing a Result-Code or Experimental-Result AVP
populated with the given value.
This is equivalent of calling
ShMessageFactory.createPushNotificationAnswer(long, boolean) followed by
ShClientSubscriptionActivity.sendPushNotificationAnswer(org.jainslee.resources.diameter.sh.types.v780.PushNotificationAnswer) . |
void |
ShClientNotificationActivity.sendPushNotificationAnswer(long resultCode,
boolean isExperimentalResultCode)
Convenience method to create and send a PushNotificationAnswer containing a Result-Code or Experimental-Result AVP
populated with the given value.
This is equivalent of calling
ShMessageFactory.createPushNotificationAnswer(long, boolean) followed by
ShClientNotificationActivity.sendPushNotificationAnswer(org.jainslee.resources.diameter.sh.types.v780.PushNotificationAnswer) . |
void |
ShClientSubscriptionActivity.sendPushNotificationAnswer(PushNotificationAnswer message)
Send a manually-constructed PushNotificationAnswer to the peer that sent the PushNotificationRequest.
|
void |
ShClientNotificationActivity.sendPushNotificationAnswer(PushNotificationAnswer message)
Send a manually-constructed PushNotificationAnswer to the peer that sent the PushNotificationRequest.
|
void |
ShServerNotificationActivity.sendPushNotificationRequest(PushNotificationRequest message)
Sends a push notification request asynchronously.
|
void |
ShServerActivity.sendSubscribeNotificationsAnswer(SubscribeNotificationsAnswer message)
Send the SubscribeNotificationsAnswer to the peer that sent the SubscribeNotificationsRequest.
|
void |
ShClientSubscriptionActivity.sendSubscribeNotificationsRequest(SubscribeNotificationsRequest message)
Send a Subscribe-Notifications-Request message.
|
void |
ShClientActivity.sendSubscribeNotificationsRequest(SubscribeNotificationsRequest message)
Send a Subscribe-Notifications-Request message asynchronously.
|
void |
ShClientSubscriptionActivity.sendSuccessPushNotificationAnswer()
Convenience method to create and send a PushNotificationAnswer containing a Result-Code set to
DiameterResultCode.DIAMETER_SUCCESS .
This is equivalent of calling ShMessageFactory.createPushNotificationAnswer(long, boolean) with
arguments (DiameterResultCode.DIAMETER_SUCCESS, false) followed by
ShClientSubscriptionActivity.sendPushNotificationAnswer(org.jainslee.resources.diameter.sh.types.v780.PushNotificationAnswer) . |
void |
ShClientNotificationActivity.sendSuccessPushNotificationAnswer()
Convenience method to create and send a PushNotificationAnswer containing a Result-Code set to
DiameterResultCode.DIAMETER_SUCCESS .
This is equivalent of calling ShMessageFactory.createPushNotificationAnswer(long, boolean) with
arguments (DiameterResultCode.DIAMETER_SUCCESS, false) followed by
ShClientNotificationActivity.sendPushNotificationAnswer(org.jainslee.resources.diameter.sh.types.v780.PushNotificationAnswer) . |
void |
ShClientSubscriptionActivity.sendUnsubscribeRequest()
Send a Subscribe-Notifications-Request message containing the AVPs required to UNSUBSCRIBE from the
user that this activity represents a subscription to.
|
void |
ShServerActivity.sendUserDataAnswer(UserDataAnswer message)
Send the UserDataAnswer to the peer that sent the UserDataRequest.
|
void |
ShClientActivity.sendUserDataRequest(UserDataRequest message)
Send a User-Data-Request message asynchronously.
|
SubscribeNotificationsAnswer |
ShProvider.subscribeNotificationsRequest(SubscribeNotificationsRequest message)
Sends a synchronous SubscribeNotificationsRequest which will block until an answer is received from the peer.
|
UserDataAnswer |
ShProvider.userDataRequest(UserDataRequest message)
Sends a synchronous UserDataRequest which will block until an answer is received from the peer.
|
Modifier and Type | Method and Description |
---|---|
ProfileUpdateAnswer |
ShProvider.profileUpdateRequest(ProfileUpdateRequest message)
Sends a synchronous ProfileUpdateRequest which will block until an answer is received from the peer.
|
PushNotificationAnswer |
ShProvider.pushNotificationRequest(PushNotificationRequest message)
Sends a synchronous PushNotificationRequest which will block until an answer is received from the peer.
|
void |
ShServerActivity.sendProfileUpdateAnswer(ProfileUpdateAnswer message)
Send the ProfileUpdateAnswer to the peer that sent the ProfileUpdateRequest.
|
void |
ShClientActivity.sendProfileUpdateRequest(ProfileUpdateRequest message)
Send a Profile-Update-Request message asynchronously.
|
void |
ShClientSubscriptionActivity.sendPushNotificationAnswer(long resultCode,
boolean isExperimentalResultCode)
Convenience method to create and send a PushNotificationAnswer containing a Result-Code or Experimental-Result AVP
populated with the given value.
This is equivalent of calling
ShMessageFactory.createPushNotificationAnswer(long, boolean) followed by
ShClientSubscriptionActivity.sendPushNotificationAnswer(org.jainslee.resources.diameter.sh.types.v880.PushNotificationAnswer) . |
void |
ShClientNotificationActivity.sendPushNotificationAnswer(long resultCode,
boolean isExperimentalResultCode)
Convenience method to create and send a PushNotificationAnswer containing a Result-Code or Experimental-Result AVP
populated with the given value.
This is equivalent of calling
ShMessageFactory.createPushNotificationAnswer(long, boolean) followed by
ShClientNotificationActivity.sendPushNotificationAnswer(org.jainslee.resources.diameter.sh.types.v880.PushNotificationAnswer) . |
void |
ShClientSubscriptionActivity.sendPushNotificationAnswer(PushNotificationAnswer message)
Send a manually-constructed PushNotificationAnswer to the peer that sent the PushNotificationRequest.
|
void |
ShClientNotificationActivity.sendPushNotificationAnswer(PushNotificationAnswer message)
Send a manually-constructed PushNotificationAnswer to the peer that sent the PushNotificationRequest.
|
void |
ShServerNotificationActivity.sendPushNotificationRequest(PushNotificationRequest message)
Sends a push notification request asynchronously.
|
void |
ShServerActivity.sendSubscribeNotificationsAnswer(SubscribeNotificationsAnswer message)
Send the SubscribeNotificationsAnswer to the peer that sent the SubscribeNotificationsRequest.
|
void |
ShClientSubscriptionActivity.sendSubscribeNotificationsRequest(SubscribeNotificationsRequest message)
Send a Subscribe-Notifications-Request message.
|
void |
ShClientActivity.sendSubscribeNotificationsRequest(SubscribeNotificationsRequest message)
Send a Subscribe-Notifications-Request message asynchronously.
|
void |
ShClientSubscriptionActivity.sendSuccessPushNotificationAnswer()
Convenience method to create and send a PushNotificationAnswer containing a Result-Code set to
DiameterResultCode.DIAMETER_SUCCESS .
This is equivalent of calling ShMessageFactory.createPushNotificationAnswer(long, boolean) with
arguments (DiameterResultCode.DIAMETER_SUCCESS, false) followed by
ShClientSubscriptionActivity.sendPushNotificationAnswer(org.jainslee.resources.diameter.sh.types.v880.PushNotificationAnswer) . |
void |
ShClientNotificationActivity.sendSuccessPushNotificationAnswer()
Convenience method to create and send a PushNotificationAnswer containing a Result-Code set to
DiameterResultCode.DIAMETER_SUCCESS .
This is equivalent of calling ShMessageFactory.createPushNotificationAnswer(long, boolean) with
arguments (DiameterResultCode.DIAMETER_SUCCESS, false) followed by
ShClientNotificationActivity.sendPushNotificationAnswer(org.jainslee.resources.diameter.sh.types.v880.PushNotificationAnswer) . |
void |
ShClientSubscriptionActivity.sendUnsubscribeRequest()
Send a Subscribe-Notifications-Request message containing the AVPs required to UNSUBSCRIBE from the
user that this activity represents a subscription to.
|
void |
ShServerActivity.sendUserDataAnswer(UserDataAnswer message)
Send the UserDataAnswer to the peer that sent the UserDataRequest.
|
void |
ShClientActivity.sendUserDataRequest(UserDataRequest message)
Send a User-Data-Request message asynchronously.
|
SubscribeNotificationsAnswer |
ShProvider.subscribeNotificationsRequest(SubscribeNotificationsRequest message)
Sends a synchronous SubscribeNotificationsRequest which will block until an answer is received from the peer.
|
UserDataAnswer |
ShProvider.userDataRequest(UserDataRequest message)
Sends a synchronous UserDataRequest which will block until an answer is received from the peer.
|
Modifier and Type | Method and Description |
---|---|
ProfileUpdateAnswer |
ShProvider.profileUpdateRequest(ProfileUpdateRequest message)
Sends a synchronous ProfileUpdateRequest which will block until an answer is received from the peer.
|
PushNotificationAnswer |
ShProvider.pushNotificationRequest(PushNotificationRequest message)
Sends a synchronous PushNotificationRequest which will block until an answer is received from the peer.
|
void |
ShServerActivity.sendProfileUpdateAnswer(ProfileUpdateAnswer message)
Send the ProfileUpdateAnswer to the peer that sent the ProfileUpdateRequest.
|
void |
ShClientActivity.sendProfileUpdateRequest(ProfileUpdateRequest message)
Send a Profile-Update-Request message asynchronously.
|
void |
ShClientSubscriptionActivity.sendPushNotificationAnswer(long resultCode,
boolean isExperimentalResultCode)
Convenience method to create and send a PushNotificationAnswer containing a Result-Code or Experimental-Result AVP
populated with the given value.
This is equivalent of calling
ShMessageFactory.createPushNotificationAnswer(long, boolean) followed by
ShClientSubscriptionActivity.sendPushNotificationAnswer(org.jainslee.resources.diameter.sh.types.v940.PushNotificationAnswer) . |
void |
ShClientNotificationActivity.sendPushNotificationAnswer(long resultCode,
boolean isExperimentalResultCode)
Convenience method to create and send a PushNotificationAnswer containing a Result-Code or Experimental-Result AVP
populated with the given value.
This is equivalent of calling
ShMessageFactory.createPushNotificationAnswer(long, boolean) followed by
ShClientNotificationActivity.sendPushNotificationAnswer(org.jainslee.resources.diameter.sh.types.v940.PushNotificationAnswer) . |
void |
ShClientSubscriptionActivity.sendPushNotificationAnswer(PushNotificationAnswer message)
Send a manually-constructed PushNotificationAnswer to the peer that sent the PushNotificationRequest.
|
void |
ShClientNotificationActivity.sendPushNotificationAnswer(PushNotificationAnswer message)
Send a manually-constructed PushNotificationAnswer to the peer that sent the PushNotificationRequest.
|
void |
ShServerNotificationActivity.sendPushNotificationRequest(PushNotificationRequest message)
Sends a push notification request asynchronously.
|
void |
ShServerActivity.sendSubscribeNotificationsAnswer(SubscribeNotificationsAnswer message)
Send the SubscribeNotificationsAnswer to the peer that sent the SubscribeNotificationsRequest.
|
void |
ShClientSubscriptionActivity.sendSubscribeNotificationsRequest(SubscribeNotificationsRequest message)
Send a Subscribe-Notifications-Request message.
|
void |
ShClientActivity.sendSubscribeNotificationsRequest(SubscribeNotificationsRequest message)
Send a Subscribe-Notifications-Request message asynchronously.
|
void |
ShClientSubscriptionActivity.sendSuccessPushNotificationAnswer()
Convenience method to create and send a PushNotificationAnswer containing a Result-Code set to
DiameterResultCode.DIAMETER_SUCCESS .
This is equivalent of calling ShMessageFactory.createPushNotificationAnswer(long, boolean) with
arguments (DiameterResultCode.DIAMETER_SUCCESS, false) followed by
ShClientSubscriptionActivity.sendPushNotificationAnswer(org.jainslee.resources.diameter.sh.types.v940.PushNotificationAnswer) . |
void |
ShClientNotificationActivity.sendSuccessPushNotificationAnswer()
Convenience method to create and send a PushNotificationAnswer containing a Result-Code set to
DiameterResultCode.DIAMETER_SUCCESS .
This is equivalent of calling ShMessageFactory.createPushNotificationAnswer(long, boolean) with
arguments (DiameterResultCode.DIAMETER_SUCCESS, false) followed by
ShClientNotificationActivity.sendPushNotificationAnswer(org.jainslee.resources.diameter.sh.types.v940.PushNotificationAnswer) . |
void |
ShClientSubscriptionActivity.sendUnsubscribeRequest()
Send a Subscribe-Notifications-Request message containing the AVPs required to UNSUBSCRIBE from the
user that this activity represents a subscription to.
|
void |
ShServerActivity.sendUserDataAnswer(UserDataAnswer message)
Send the UserDataAnswer to the peer that sent the UserDataRequest.
|
void |
ShClientActivity.sendUserDataRequest(UserDataRequest message)
Send a User-Data-Request message asynchronously.
|
SubscribeNotificationsAnswer |
ShProvider.subscribeNotificationsRequest(SubscribeNotificationsRequest message)
Sends a synchronous SubscribeNotificationsRequest which will block until an answer is received from the peer.
|
UserDataAnswer |
ShProvider.userDataRequest(UserDataRequest message)
Sends a synchronous UserDataRequest which will block until an answer is received from the peer.
|
Modifier and Type | Method and Description |
---|---|
ProfileUpdateAnswer |
ShProvider.profileUpdateRequest(ProfileUpdateRequest message)
Sends a synchronous ProfileUpdateRequest which will block until an answer is received from the peer.
|
PushNotificationAnswer |
ShProvider.pushNotificationRequest(PushNotificationRequest message)
Sends a synchronous PushNotificationRequest which will block until an answer is received from the peer.
|
void |
ShServerActivity.sendProfileUpdateAnswer(ProfileUpdateAnswer message)
Send the ProfileUpdateAnswer to the peer that sent the ProfileUpdateRequest.
|
void |
ShClientActivity.sendProfileUpdateRequest(ProfileUpdateRequest message)
Send a Profile-Update-Request message asynchronously.
|
void |
ShClientSubscriptionActivity.sendPushNotificationAnswer(long resultCode,
boolean isExperimentalResultCode)
Convenience method to create and send a PushNotificationAnswer containing a Result-Code or Experimental-Result AVP
populated with the given value.
This is equivalent of calling
ShMessageFactory.createPushNotificationAnswer(long, boolean) followed by
ShClientSubscriptionActivity.sendPushNotificationAnswer(org.jainslee.resources.diameter.sh.types.va10.PushNotificationAnswer) . |
void |
ShClientNotificationActivity.sendPushNotificationAnswer(long resultCode,
boolean isExperimentalResultCode)
Convenience method to create and send a PushNotificationAnswer containing a Result-Code or Experimental-Result AVP
populated with the given value.
This is equivalent of calling
ShMessageFactory.createPushNotificationAnswer(long, boolean) followed by
ShClientNotificationActivity.sendPushNotificationAnswer(org.jainslee.resources.diameter.sh.types.va10.PushNotificationAnswer) . |
void |
ShClientSubscriptionActivity.sendPushNotificationAnswer(PushNotificationAnswer message)
Send a manually-constructed PushNotificationAnswer to the peer that sent the PushNotificationRequest.
|
void |
ShClientNotificationActivity.sendPushNotificationAnswer(PushNotificationAnswer message)
Send a manually-constructed PushNotificationAnswer to the peer that sent the PushNotificationRequest.
|
void |
ShServerNotificationActivity.sendPushNotificationRequest(PushNotificationRequest message)
Sends a push notification request asynchronously.
|
void |
ShServerActivity.sendSubscribeNotificationsAnswer(SubscribeNotificationsAnswer message)
Send the SubscribeNotificationsAnswer to the peer that sent the SubscribeNotificationsRequest.
|
void |
ShClientSubscriptionActivity.sendSubscribeNotificationsRequest(SubscribeNotificationsRequest message)
Send a Subscribe-Notifications-Request message.
|
void |
ShClientActivity.sendSubscribeNotificationsRequest(SubscribeNotificationsRequest message)
Send a Subscribe-Notifications-Request message asynchronously.
|
void |
ShClientSubscriptionActivity.sendSuccessPushNotificationAnswer()
Convenience method to create and send a PushNotificationAnswer containing a Result-Code set to
DiameterResultCode.DIAMETER_SUCCESS .
This is equivalent of calling ShMessageFactory.createPushNotificationAnswer(long, boolean) with
arguments (DiameterResultCode.DIAMETER_SUCCESS, false) followed by
ShClientSubscriptionActivity.sendPushNotificationAnswer(org.jainslee.resources.diameter.sh.types.va10.PushNotificationAnswer) . |
void |
ShClientNotificationActivity.sendSuccessPushNotificationAnswer()
Convenience method to create and send a PushNotificationAnswer containing a Result-Code set to
DiameterResultCode.DIAMETER_SUCCESS .
This is equivalent of calling ShMessageFactory.createPushNotificationAnswer(long, boolean) with
arguments (DiameterResultCode.DIAMETER_SUCCESS, false) followed by
ShClientNotificationActivity.sendPushNotificationAnswer(org.jainslee.resources.diameter.sh.types.va10.PushNotificationAnswer) . |
void |
ShClientSubscriptionActivity.sendUnsubscribeRequest()
Send a Subscribe-Notifications-Request message containing the AVPs required to UNSUBSCRIBE from the
user that this activity represents a subscription to.
|
void |
ShServerActivity.sendUserDataAnswer(UserDataAnswer message)
Send the UserDataAnswer to the peer that sent the UserDataRequest.
|
void |
ShClientActivity.sendUserDataRequest(UserDataRequest message)
Send a User-Data-Request message asynchronously.
|
SubscribeNotificationsAnswer |
ShProvider.subscribeNotificationsRequest(SubscribeNotificationsRequest message)
Sends a synchronous SubscribeNotificationsRequest which will block until an answer is received from the peer.
|
UserDataAnswer |
ShProvider.userDataRequest(UserDataRequest message)
Sends a synchronous UserDataRequest which will block until an answer is received from the peer.
|
Modifier and Type | Method and Description |
---|---|
ProfileUpdateAnswer |
ShProvider.profileUpdateRequest(ProfileUpdateRequest message)
Sends a synchronous ProfileUpdateRequest which will block until an answer is received from the peer.
|
PushNotificationAnswer |
ShProvider.pushNotificationRequest(PushNotificationRequest message)
Sends a synchronous PushNotificationRequest which will block until an answer is received from the peer.
|
void |
ShServerActivity.sendProfileUpdateAnswer(ProfileUpdateAnswer message)
Send the ProfileUpdateAnswer to the peer that sent the ProfileUpdateRequest.
|
void |
ShClientActivity.sendProfileUpdateRequest(ProfileUpdateRequest message)
Send a Profile-Update-Request message asynchronously.
|
void |
ShClientSubscriptionActivity.sendPushNotificationAnswer(long resultCode,
boolean isExperimentalResultCode)
Convenience method to create and send a PushNotificationAnswer containing a Result-Code or Experimental-Result AVP
populated with the given value.
This is equivalent of calling
ShMessageFactory.createPushNotificationAnswer(long, boolean) followed by
ShClientSubscriptionActivity.sendPushNotificationAnswer(org.jainslee.resources.diameter.sh.types.vb60.PushNotificationAnswer) . |
void |
ShClientNotificationActivity.sendPushNotificationAnswer(long resultCode,
boolean isExperimentalResultCode)
Convenience method to create and send a PushNotificationAnswer containing a Result-Code or Experimental-Result AVP
populated with the given value.
This is equivalent of calling
ShMessageFactory.createPushNotificationAnswer(long, boolean) followed by
ShClientNotificationActivity.sendPushNotificationAnswer(org.jainslee.resources.diameter.sh.types.vb60.PushNotificationAnswer) . |
void |
ShClientSubscriptionActivity.sendPushNotificationAnswer(PushNotificationAnswer message)
Send a manually-constructed PushNotificationAnswer to the peer that sent the PushNotificationRequest.
|
void |
ShClientNotificationActivity.sendPushNotificationAnswer(PushNotificationAnswer message)
Send a manually-constructed PushNotificationAnswer to the peer that sent the PushNotificationRequest.
|
void |
ShServerNotificationActivity.sendPushNotificationRequest(PushNotificationRequest message)
Sends a push notification request asynchronously.
|
void |
ShServerActivity.sendSubscribeNotificationsAnswer(SubscribeNotificationsAnswer message)
Send the SubscribeNotificationsAnswer to the peer that sent the SubscribeNotificationsRequest.
|
void |
ShClientSubscriptionActivity.sendSubscribeNotificationsRequest(SubscribeNotificationsRequest message)
Send a Subscribe-Notifications-Request message.
|
void |
ShClientActivity.sendSubscribeNotificationsRequest(SubscribeNotificationsRequest message)
Send a Subscribe-Notifications-Request message asynchronously.
|
void |
ShClientSubscriptionActivity.sendSuccessPushNotificationAnswer()
Convenience method to create and send a PushNotificationAnswer containing a Result-Code set to
DiameterResultCode.DIAMETER_SUCCESS .
This is equivalent of calling ShMessageFactory.createPushNotificationAnswer(long, boolean) with
arguments (DiameterResultCode.DIAMETER_SUCCESS, false) followed by
ShClientSubscriptionActivity.sendPushNotificationAnswer(org.jainslee.resources.diameter.sh.types.vb60.PushNotificationAnswer) . |
void |
ShClientNotificationActivity.sendSuccessPushNotificationAnswer()
Convenience method to create and send a PushNotificationAnswer containing a Result-Code set to
DiameterResultCode.DIAMETER_SUCCESS .
This is equivalent of calling ShMessageFactory.createPushNotificationAnswer(long, boolean) with
arguments (DiameterResultCode.DIAMETER_SUCCESS, false) followed by
ShClientNotificationActivity.sendPushNotificationAnswer(org.jainslee.resources.diameter.sh.types.vb60.PushNotificationAnswer) . |
void |
ShClientSubscriptionActivity.sendUnsubscribeRequest()
Send a Subscribe-Notifications-Request message containing the AVPs required to UNSUBSCRIBE from the
user that this activity represents a subscription to.
|
void |
ShServerActivity.sendUserDataAnswer(UserDataAnswer message)
Send the UserDataAnswer to the peer that sent the UserDataRequest.
|
void |
ShClientActivity.sendUserDataRequest(UserDataRequest message)
Send a User-Data-Request message asynchronously.
|
SubscribeNotificationsAnswer |
ShProvider.subscribeNotificationsRequest(SubscribeNotificationsRequest message)
Sends a synchronous SubscribeNotificationsRequest which will block until an answer is received from the peer.
|
UserDataAnswer |
ShProvider.userDataRequest(UserDataRequest message)
Sends a synchronous UserDataRequest which will block until an answer is received from the peer.
|
Modifier and Type | Method and Description |
---|---|
ProfileUpdateAnswer |
ShProvider.profileUpdateRequest(ProfileUpdateRequest message)
Sends a synchronous ProfileUpdateRequest which will block until an answer is received from the peer.
|
PushNotificationAnswer |
ShProvider.pushNotificationRequest(PushNotificationRequest message)
Sends a synchronous PushNotificationRequest which will block until an answer is received from the peer.
|
void |
ShServerActivity.sendProfileUpdateAnswer(ProfileUpdateAnswer message)
Send the ProfileUpdateAnswer to the peer that sent the ProfileUpdateRequest.
|
void |
ShClientActivity.sendProfileUpdateRequest(ProfileUpdateRequest message)
Send a Profile-Update-Request message asynchronously.
|
void |
ShClientSubscriptionActivity.sendPushNotificationAnswer(long resultCode,
boolean isExperimentalResultCode)
Convenience method to create and send a PushNotificationAnswer containing a Result-Code or Experimental-Result AVP
populated with the given value.
This is equivalent of calling
ShMessageFactory.createPushNotificationAnswer(long, boolean) followed by
ShClientSubscriptionActivity.sendPushNotificationAnswer(org.jainslee.resources.diameter.sh.types.vc60.PushNotificationAnswer) . |
void |
ShClientNotificationActivity.sendPushNotificationAnswer(long resultCode,
boolean isExperimentalResultCode)
Convenience method to create and send a PushNotificationAnswer containing a Result-Code or Experimental-Result AVP
populated with the given value.
This is equivalent of calling
ShMessageFactory.createPushNotificationAnswer(long, boolean) followed by
ShClientNotificationActivity.sendPushNotificationAnswer(org.jainslee.resources.diameter.sh.types.vc60.PushNotificationAnswer) . |
void |
ShClientSubscriptionActivity.sendPushNotificationAnswer(PushNotificationAnswer message)
Send a manually-constructed PushNotificationAnswer to the peer that sent the PushNotificationRequest.
|
void |
ShClientNotificationActivity.sendPushNotificationAnswer(PushNotificationAnswer message)
Send a manually-constructed PushNotificationAnswer to the peer that sent the PushNotificationRequest.
|
void |
ShServerNotificationActivity.sendPushNotificationRequest(PushNotificationRequest message)
Sends a push notification request asynchronously.
|
void |
ShServerActivity.sendSubscribeNotificationsAnswer(SubscribeNotificationsAnswer message)
Send the SubscribeNotificationsAnswer to the peer that sent the SubscribeNotificationsRequest.
|
void |
ShClientSubscriptionActivity.sendSubscribeNotificationsRequest(SubscribeNotificationsRequest message)
Send a Subscribe-Notifications-Request message.
|
void |
ShClientActivity.sendSubscribeNotificationsRequest(SubscribeNotificationsRequest message)
Send a Subscribe-Notifications-Request message asynchronously.
|
void |
ShClientSubscriptionActivity.sendSuccessPushNotificationAnswer()
Convenience method to create and send a PushNotificationAnswer containing a Result-Code set to
DiameterResultCode.DIAMETER_SUCCESS .
This is equivalent of calling ShMessageFactory.createPushNotificationAnswer(long, boolean) with
arguments (DiameterResultCode.DIAMETER_SUCCESS, false) followed by
ShClientSubscriptionActivity.sendPushNotificationAnswer(org.jainslee.resources.diameter.sh.types.vc60.PushNotificationAnswer) . |
void |
ShClientNotificationActivity.sendSuccessPushNotificationAnswer()
Convenience method to create and send a PushNotificationAnswer containing a Result-Code set to
DiameterResultCode.DIAMETER_SUCCESS .
This is equivalent of calling ShMessageFactory.createPushNotificationAnswer(long, boolean) with
arguments (DiameterResultCode.DIAMETER_SUCCESS, false) followed by
ShClientNotificationActivity.sendPushNotificationAnswer(org.jainslee.resources.diameter.sh.types.vc60.PushNotificationAnswer) . |
void |
ShClientSubscriptionActivity.sendUnsubscribeRequest()
Send a Subscribe-Notifications-Request message containing the AVPs required to UNSUBSCRIBE from the
user that this activity represents a subscription to.
|
void |
ShServerActivity.sendUserDataAnswer(UserDataAnswer message)
Send the UserDataAnswer to the peer that sent the UserDataRequest.
|
void |
ShClientActivity.sendUserDataRequest(UserDataRequest message)
Send a User-Data-Request message asynchronously.
|
SubscribeNotificationsAnswer |
ShProvider.subscribeNotificationsRequest(SubscribeNotificationsRequest message)
Sends a synchronous SubscribeNotificationsRequest which will block until an answer is received from the peer.
|
UserDataAnswer |
ShProvider.userDataRequest(UserDataRequest message)
Sends a synchronous UserDataRequest which will block until an answer is received from the peer.
|