Overview
The Registrar has an extensible storage system for Third Party Registration data. The default storage system uses a Cassandra Database cluster.
How it works
The Cassandra Storage system uses the Cassandra CQL RA to create, update and remove entries from a Cassandra Database cluster.
Each insert and update in the database uses Cassandra’s 'time to live' feature, automatically removing stale data from the database. The TTL is set in seconds. It is always calculated to be greater than the largest expiry for a First Party Registration.
The TTL is defined as the largest expiry from First Party Registration plus a configured time.
The configured time value is defined in the Profile Table CassandraSubscriberDataStoreConfig
.
It is scoped by a Sentinel Selection Key.
The value is stored in the attribute named CassandraTTL
. The default value is 1800 seconds (30 minutes).
For information about the Cassandra CQL RA’s architecture and configuration, see the Cassandra CQL Resource Adaptor Guide. |
Cassandra Database Configuration
The administrator is required to download and set up a Cassandra Database. The Sentinel VoLTE installer does not perform this function on the behalf of the user. It is required that the installed version of Cassandra be 2.0.17
.
OpenCloud recommends reading Cassandra’s Getting Started page.
For a test system, a single Cassandra Database instance may be sufficient if redundancy is not a requirement.
Minimal production recommendations
For a minimal production system, in order to tolerate a single failure in the Cassandra Database there should be at least three nodes configured per site. The Cassandra replication factor should be three.
Higher replication factors can be used on larger clusters. Please refer to Cassandra documentation for clusters larger than three and appropriate replication factors.
The recommended consistency level for this storage system is the LOCAL_QUORUM
consistency level. All read and write queries are programmed to use LOCAL_QUORUM
as the consistency level.
It is assumed that in a multi-site deployment, an appropriate Snitch
and Topology Strategy are used.
As a basis, we suggest use of the NetworkTopologyStrategy
and GossipingPropertyFileSnitch
, then reading the relevant links below to review this selection.
There are several recommended links to review when planning a deployment.
Planning a Cassandra deployment |
---|
http://docs.datastax.com/en/cassandra/2.0/cassandra/architecture/architecturePlanningAbout_c.html |
Recommended settings for Cassandra |
http://docs.datastax.com/en/cassandra/2.0/cassandra/install/installRecommendSettings.html |
Some anti-patterns, or things to not do with Cassandra |
Cassandra Consistency levels and replication factors - in particlar read the LOCAL_QUORUM section |
http://docs.datastax.com/en/cassandra/2.0/cassandra/dml/dml_config_consistency_c.html |
Cassandra Snitches - read this when configuring a single site or multi-site deployment |
http://docs.datastax.com/en/cassandra/2.0/cassandra/architecture/architectureSnitchesAbout_c.html |
Cassandra Topology Strategies - read this when configuring a single site or multi-site deployment |
Performance recommendations
OpenCloud recommend that Cassandra’s Data directory and Commit log directories are on different physical devices (e.g. different disks). If this is not possible, then different partitions on the same device is acceptable. OpenCloud performance testing shows that there are benefits using different partitions on the same device when there are 1000 or more Cassandra DB transactions per second.
Data Schema
Cassandra’s tables exist in a 'keyspace', which, for illustrative purposes, can be thought of as a 'database' in SQL implementations. Creating a keyspace is simple, but some considerations are present.
-
The keyspace must be named
opencloud_thirdparty_reg
-
For a production environment, and for non-functional testing prior to production, the keyspace is created such that it is replicated. A sample CQL command for creating such a keyspace is:
CREATE KEYSPACE opencloud_thirdparty_reg WITH REPLICATION={'class' : 'NetworkTopologyStrategy' ,'replication_factor' : 3 };
-
When developing features using the SDK against Cassandra, replication may not be necessary. A sample CQL command for creating such a keyspace is:
CREATE KEYSPACE opencloud_thirdparty_reg WITH REPLICATION={'class' : 'SimpleStrategy' ,'replication_factor' : 1 };
Once a keyspace is created, the required tables can be created. The following CQL statements provide both the structure and insight into the tables that are required.
USE opencloud_thirdparty_reg;
CREATE TABLE REGISTRATIONDATA(
callid text, //The callid used for registration
defaultpublicid text, //The default IMS Public ID
privateid text, //The IMS Private ID
associateduris list<text>, //The Associated URIs
contacts set<text>, //Registered Contacts
visitednetworkid text, //P-Visited-Network-ID header from registration
creationtime timestamp, //The registration creation datetime
expires int, //The time this registration expires in seconds
expirytime timestamp, //The registration expiration datetime
tempgruu text, //Temporary GRUU defined in the Contacts
gruu text, //The GRUU in the Contacts
cmsisdn text, //The Correlation MSISDN
stnsr text, //The Session Transfer Number for Single Radio
isuesrvcccapable boolean, //Whether the ue has capability UE-SRVCC-CAPABILITY-SUPPORTED
paccessnetworkinfo list<text>, //P-Access-Network-Info header from registration
currentatusti text, //Current ATU-STI, from initial registration
atcfmgmturi text, //ATCF Management URI, from initial registration
atcfpathuri text, //ATCF path URI, from initial registration
primary key(callid)
);
CREATE TABLE ASSOCURIS(
impu text, //A referenced IMS Public ID
callid text, //The callid used for registration
isdefault boolean, //Flag indicating if this IMPU is the default public ID
defaultpublicid text, //The default IMS Public ID
privateid text, //The IMS Private ID
regstate text, //Registration state: active, terminated or unknown
creationtime timestamp, //The registration creation datetime
expires int, //The time this registration expires in seconds
expirytime timestamp, //The registration expiration datetime
cmsisdn text, //The Correlation MSISDN
associateduris list<text>, //The Associated URIs
contacts set<text>, //Registered Contacts
isuesrvcccapable boolean, //Whether the ue has capability UE-SRVCC-CAPABILITY-SUPPORTED
visitednetworkid text, //P-Visited-Network-ID header from registration
paccessnetworkinfo list<text>, //P-Access-Network-Info headers from registration
currentatusti text, //Current ATU-STI, from initial registration
atcfmgmturi text, //ATCF Management URI, from initial registration
atcfpathuri text, //ATCF path URI, from initial registration
primary key(impu,callid)
);
Statistics
The statistics are updated during the processing of the feature.
Parameter | … incremented if … |
---|---|
FailedToPrepareCassandraStatement |
Can not prepare a statement to submit to database. |
FailedToExecuteCassandraStatement |
Can not execute a statement in database. |
FailedToReadCassandraResultSet |
Can not access the result of statement execution. |
NoRegistrationDataFound |
No registration data found to the specified callid. |
RegistrationDataExpired |
The registration data found is expired. |
RegistrationDataFound |
Found a valid registration data. |
AddNewPAssociatedURI |
Could add a new P-Associated URI. |
RefreshInactivePAssociatedURI |
A P-Associated URI is updated to the new expire date on a re-registration event. |
TerminatePAssociatedURI |
Could set a P-Associated URI to |
DeleteRegistrationData |
Could delete the subscriber data. |
ActivatePAssociatedURI |
Could set a P-Associated URI to |
For Third Party Registration, the statistics are tracked by the sentinel.registrar SBB and can be found using the parameter set
SLEE-Usage.Services.ServiceID[name=sentinel.sip,vendor=OpenCloud,version=2.7.0].SbbID[name=registrar.subscribers.cassandra,vendor=OpenCloud,version=2.7.0]