Interface NodeHousekeepingMBean


  • public interface NodeHousekeepingMBean

    The NodeHousekeepingMBean MBean interface provides methods for inspecting Rhino SLEE state.

    Methods are provided for locating, inspecting, and in some cases removing Rhino SLEE internal state. These methods are intended to assist in application debugging in addition to preventing downtime caused by unexpected faults in a production system.

    Clients should obtain the ObjectName of a NodeHousekeepingMBean using RhinoHousekeepingMBean.getNodeHousekeeping(int) for a particular node. Operations invoked on a NodeHousekeepingMBean only apply to state visible to that node.

    Timestamps

    Search methods that accept time ranges accept timestamps as long values measured in milliseconds. Because timestamps are considered to be relative to the system time of the Rhino node processing the request some inaccuracy will occur if the system clock’s on client and all cluster nodes are out of sync. In the worst case this simply means too few results may be returned. In all cases where a timestamp parameter is available it is optional and will only be effective if the supplied value is greater than 0.

    Searching and result set sizes

    None of the search type methods in this MBean will return an unlimited number of entries. This is intended to prevent unacceptable system pauses or latency caused by collating and serialising a huge result set. All search type methods take a max parameter which allows the user to limit the result size.

    Activity Search Results

    This CompositeData type describes an activity found in an activity search operation. A TabularData containing records of this type is returned by the methods getActivities(int, boolean), getActivities(int, String, boolean), getActivities(int, String, long, long, long, long, boolean), and getActivities(int, String, long, long, long, long, boolean).

    Field Open Type Description

    pkey

    String

    The primary key of the activity. This key uniquely identifies the activity within the SLEE.

    namespace

    String

    The namespace that the activity exists in.

    ra-entity

    String

    The name of the resource adaptor entity which created this activity.

    submission-time

    Date

    Time at which the activity was first submitted to the SLEE.

    update-time

    Date

    Time at which the activity was last updated (when the most recent database generation record was created).

    handle

    String

    A string representation of the activities activity handle. The format of the string representation depends on the implementation supplied by the activities resource adaptor. Resource adaptors may provide useful diagnostic information in the string representation of the activity handle.

    replicated

    Boolean

    Replicated flag, true for activities replicated using the legacy savanna framework, false otherwise. Please note that as of Rhino 2.6.1 this attribute is deprecated. The replication-mode attribute provides more detailed replication information.

    replication-mode

    String

    The replication mode of the activity. Will be one of:

    • NONE - not replicated,

    • SAVANNA - activity is replicated using the savanna framework, or

    • KEY_VALUE_STORE - activity is replicated using the key/value store for the namespace.

    node

    Integer

    Node ID of the cluster member which is now responsible for processing events on this activity. Negative values indicate a non-resident activity, ie. an activity whose state is currently only stored remotely by, for example, a key/value store. The absolute value of the node ID identifies the node that was last responsible for processing events on the activity.

    attach-count

    Integer

    The number of SBBs attached to the activity.

    ref-count

    Integer

    An internal count of the number of references made to the activity through activity context naming or the timer facility.

    Attached Activity Search Results

    This CompositeData type describes an attached activity found in a query of activities attached to an SBB entity. A TabularData table with this record type is returned by the methods getAttachedActivities(int, ServiceID, SbbID, String) and getAttachedActivities(int, ServiceID, SbbID, String, boolean).

    Field Open Type Description

    pkey

    String

    The primary key of the activity. This key uniquely identifies the activity within the SLEE.

    namespace

    String

    The namespace that activity exists in.

    handle

    String

    A string representation of the activities activity handle. The format of the string representation depends on the implementation supplied by the activities resource adaptor. Resource adaptors may provide useful diagnostic information in the string representation of the activity handle.

    ra-entity

    String

    The name of the resource adaptor entity which created this activity.

    replicated

    Boolean

    Replicated flag, true for replicated activities, false for non-replicated activities.

    SBB Entity Search Results

    This CompositeData type describes an SBB entity found in an SBB entity search operation. A TabularData object containing a table of SBB entity search result CompositeData objects is returned by the methods getSbbs(int, ServiceID), getSbbs(int, ServiceID, long, long), getSbbs(int, ServiceID, SbbID, long, long), and getSbbs(int, ServiceID, SbbID, long, long).

    Field Open Type Description

    pkey

    String

    The primary key of the SBB entity. This key uniquely identifies the SBB entity within its Service and SBB component type.

    namespace

    String

    The namespace that the SBB exists in.

    parent-pkey

    String

    The primary key of this SBB entities parent SBB if it has one, otherwise null.

    service-component-id

    String

    The service component ID of the service to which the SBB entity belongs.

    sbb-component-id

    String

    The SBB component ID of the SBB component to which the SBB entity belongs.

    creation-time

    Date

    The time at which the SBB entity was first created. This field can be used to tell how old an SBB entity is.

    node

    Integer

    Node ID of the cluster member which is currently responsible for delivering events to the SBB entity. Negative values indicate a non-resident SBB entity, ie. an SBB entity whose state is currently only stored remotely by, for example, a key/value store. The absolute value of the node ID identifies the node that was last responsible for delivering events to the SBB entity.

    replicated

    Boolean

    Replicated flag, true for replicated SBB entities, false for non-replicated SBB entities.

    Timer Search Results

    Describes a timer returned by a timer search operation. A TabularData object containing a table of timer info CompositeData objects is returned by the methods getTimers(int) and getTimers(int, java.lang.String, long, long). This is also included in the information returned by the methods getActivityInfo(String, boolean) and getActivityInfo(String, boolean, boolean).

    Field Open Type Description

    pkey

    String

    The primary key of the timer. This key uniquely identifies the timer within the SLEE.

    namespace

    String

    The namespace that the timer exists in.

    activity-pkey

    String

    The primary key of the SLEE activity this timer is attached to.

    submission-time

    Date

    The date the timer was created.

    period

    Long

    The timers period.

    repetitions

    Integer

    Number of repetitions of the timer.

    preserve-missed

    String

    Behaviour when a timer is missed. One of:

    • NONE - do not preserve missed,

    • ALL - preserve all missed events, or

    • LAST - Preserve last missed event.

    replicated

    Boolean

    Replicated flag, true for replicated timers entities, false for non-replicated timers. A timer is replicated if the activity it is attached to is replicated.

    remote-timer-pkey

    String

    The primary key of the remote timer created for this timer, if any.

    Remote Timer Search Results

    Describes a remote timer returned by a remote timer search operation. A TabularData object containing a table of timer info CompositeData objects is returned by the methods getRemoteTimers(int) and getRemoteTimers(int, java.lang.String, long, long).

    Field Open Type Description

    pkey

    String

    The primary key of the remote timer. This key uniquely identifies the remote timer within the SLEE.

    namespace

    String

    The namespace that the timer exists in.

    activity-pkey

    String

    The primary key of the SLEE activity this timer is attached to.

    submission-time

    Date

    The date the timer was created.

    interval

    Long

    The initial time period after the timer was created before the first firing.

    period

    Long

    The timers period, if a repeating timer.

    expiry-time

    Date

    The date that the timer will expire.

    callback-node

    Integer

    The node that will receive a callback with the timer event when the timer next fires. May be null if the assigned callback address for the timer is not currently reachable.

    Activity Context Binding Search Results

    Describes an activity context naming facility binding returned by an AC binding search operation. A TabularData object containing a table of activity context binding CompositeData objects is returned by the methods getBoundActivities(int) and getBoundActivities(int, long, long).

    Field Open Type Description

    name

    String

    The name the activity is bound under. This name is unique within the SLEE.

    pkey

    String

    The primary key of the bound activity.

    namespace

    String

    The namespace that the activity exists in.

    submission-time

    Date

    The time the activity was bound.

    replicated

    Boolean

    Replicated flag, true for replicated activity context bindings, false for non-replicated bindings. A binding is replicated if the bound activity is replicated.

    Activity Information

    Detailed information about an activity is returned in a CompositeData object by the methods getActivityInfo(String, boolean) and getActivityInfo(String, boolean, boolean).

    Field Open Type Description

    pkey

    String

    The primary key of the activity. This key uniquely identifies the activity within the SLEE.

    namespace

    String

    The namespace that the activity exists in.

    ra-entity

    String

    The name of the resource adaptor entity which created this activity.

    submission-time

    Date

    Time at which the activity was first submitted to the SLEE.

    update-time

    Date

    Time at which the activity was last updated (when the most recent database generation record was created).

    last-event-time

    Date

    Time at which the most recent event was submitted on the activity.

    creating-gen

    Long

    Memory database generation in which the activity was created.

    flags

    String

    Hex string representation of activity flags.

    handle

    String

    A string representation of the activities activity handle. The format of the string representation depends on the implementation supplied by the activity’s resource adaptor. Resource adaptors may provide useful diagnostic information in the string representation of the activity handle.

    activity

    String

    A string representation of the activity. The format of the string representation depends on the implementation supplied by the activity’s resource adaptor. Resource adaptors may provide useful diagnostic information in the string representation of the activity.

    replicated

    Boolean

    Replicated flag, true for activities replicated using the legacy savanna framework, false otherwise. Please note that as of Rhino 2.6.1 this attribute is deprecated. The replication-mode attribute provides more detailed replication information.

    replication-mode

    String

    The replication mode of the activity. Will be one of:

    • NONE - not replicated,

    • SAVANNA - activity is replicated using the savanna framework, or

    • KEY_VALUE_STORE - activity is replicated using the key/value store for the namespace.

    name-bindings

    String[]

    The name bindings that the activity has in the Activity Context Naming Facility.

    head-event

    CompositeType

    Information about the event at the head of the activity’s event queue, if any.

    event-queue

    TabularData

    Current event queue as TabularData.

    submitting-node

    Integer

    Node ID of the cluster member on which the activity was created.

    node

    Integer

    Node ID of the cluster member which is now responsible for processing events on this activity. This may differ from the submitting-node if the activity has been failed over. A negative value indicates a non-resident activity, ie. an activity whose state is currently only stored remotely by, for example, a key/value store. The absolute value of the node ID identifies the node that was last responsible for processing events on the activity.

    events-submitted

    Integer

    The number of events that have been submitted for processing on the activity.

    suspended

    Boolean

    Suspended flag, true if the activity is suspended.

    ending

    Boolean

    Ending flag, true if the activity is ending.

    generations

    TabularData

    Activity lifecycle generations as TabularData. The format of the tabular data is described in Generation Information.

    Generation Information

    A CompositeData object containing details of Activity generations. Returned in Activity Information.

    Field Open Type Description

    id

    long

    Generation ID.

    removed

    Boolean

    True if the generation has been removed.

    refcount

    Integer

    Count of references to the generation.

    attached-sbbs

    TabularData

    Attached sbb’s as TabularData. The format of the tabular data is described in Attached SBB Information.

    timers

    TabularData

    Attached timers as TabularData. The format of the tabular data is described in Timer Search Results.

    Attached SBB Information

    A CompositeData object containing identities of attached SBBs. Returned in Generation Information.

    Field Open Type Description

    pkey

    String

    The primary key of the SBB entity. This key uniquely identifies the SBB entity within its Service and SBB component type.

    namespace

    String

    The namespace that the SBB entity exists in.

    service-component-id

    String

    The service component ID of the service to which the SBB entity belongs.

    sbb-component-id

    String

    The SBB component ID of the SBB component to which the SBB entity belongs.

    SBB Entity Information

    A CompositeData object containing detailed SBB Entity information is returned by the methods getSbbInfo(ServiceID, SbbID, String) and getSbbInfo(ServiceID, SbbID, String, boolean).

    Field Open Type Description

    pkey

    String

    The primary key of the SBB entity. This key uniquely identifies the SBB entity within its Service and SBB component type.

    service-component-id

    String

    The service component ID of the service to which the SBB entity belongs.

    sbb-component-id

    String

    The SBB component ID of the SBB component to which the SBB entity belongs.

    replicated

    Boolean

    Replicated flag, true for replicated SBB entities, false for non-replicated SBB entities.

    creation-time

    Date

    The time at which the SBB entity was first created. This field can be used to tell how old an SBB entity is.

    attached-activities

    TabularData

    Attached activities as TabularData. The format of the tabular data is described in Attached Activity Search Results.

    creating-node-id

    Integer

    The node ID of the cluster member on which this SBB entity was created.

    owning-node-id

    Integer

    Node ID of the cluster member which is currently responsible for delivering events to the SBB entity. Negative values indicate a non-resident SBB entity, ie. an SBB entity whose state is currently only stored remotely by, for example, a key/value store. The absolute value of the node ID identifies the node that was last responsible for delivering events to the SBB entity.

    parent-pkey

    String

    The primary key of this SBB entities parent SBB if it has one, otherwise null.

    priority

    Integer

    Priority for event handling, events are handled sequentially in decending priority order.

    convergence-name

    String

    A string representation of the SLEE convergence name calculated for this SBB entity.

    SBB Entity Diagnostic Information

    A CompositeData object containing detailed SBB Entity information is returned by the methods getSbbDiagnostics(ServiceID, SbbID, String) and getSbbDiagnostics(ServiceID, SbbID, String, boolean).

    Field Open Type Description

    pkey

    String

    The primary key of the SBB entity. This key uniquely identifies the SBB entity within its Service and SBB component type.

    namespace

    String

    The namespace that the SBB entity exists in.

    service-component-id

    String

    The service component ID of the service to which the SBB entity belongs.

    sbb-component-id

    String

    The SBB component ID of the SBB component to which the SBB entity belongs.

    replicated

    Boolean

    Replicated flag, true for replicated SBB entities, false for non-replicated SBB entities.

    creation-time

    Date

    The time at which the SBB entity was first created. This field can be used to tell how old an SBB entity is.

    attached-activities

    TabularData

    Attached activities as TabularData. The format of the tabular data is described in Attached Activity Search Results.

    creating-node-id

    Integer

    The node ID of the cluster member on which this SBB entity was created.

    owning-node-id

    Integer

    Node ID of the cluster member which is currently responsible for delivering events to the SBB entity. Negative values indicate a non-resident SBB entity, ie. an SBB entity whose state is currently only stored remotely by, for example, a key/value store. The absolute value of the node ID identifies the node that was last responsible for delivering events to the SBB entity.

    parent-pkey

    String

    The primary key of this SBB entities parent SBB if it has one, otherwise null.

    priority

    Integer

    Priority for event handling, events are handled sequentially in descending priority order.

    convergence-name

    String

    A string representation of the SLEE convergence name calculated for this SBB entity.

    diagnostics

    String

    A string representation of the result of calling getSbbDiagnostics() for this SBB entity.

    Timer Information

    A CompositeData object containing detailed timer information is returned by the method getTimerInfo(String).

    Field Open Type Description

    pkey

    String

    The primary key of the timer. This key uniquely identifies the timer within the SLEE.

    namespace

    String

    The namespace that the timer exists in.

    activity-pkey

    String

    The primary key of the SLEE activity this timer is attached to.

    ra-entity

    String

    The name of the resource adaptor entity which created the activity on which this timer is set.

    submission-time

    Date

    The date the timer was created.

    next-firing-time

    Date

    The date the timer will next fire.

    period

    Long

    The timers period.

    repetitions

    Integer

    Number of repetitions of the timer.

    remaining

    Integer

    Number of remaining repetitions of the timer.

    preserve-missed

    String

    Behaviour when a timer is missed. One of:

    * NONE - do not preserve missed, ALL - preserve all missed events, or LAST - Preserve last missed event.

    node

    Integer

    The node currently responsible for scheduling the timer.

    replicated

    Boolean

    Replicated flag, true for replicated timers entities, false for non-replicated timers. A timer is replicated if the activity it is attached to is replicated.

    remote-timer-pkey

    String

    The primary key of the remote timer created for this timer, if any.

    Remote Timer Information

    A CompositeData object containing detailed timer information is returned by the method getRemoteTimerInfo(String).

    Field Open Type Description

    pkey

    String

    The primary key of the remote timer. This key uniquely identifies the remote timer within the SLEE.

    namespace

    String

    The namespace that the timer exists in.

    activity-pkey

    String

    The primary key of the SLEE activity this timer is attached to.

    ra-entity

    String

    The name of the resource adaptor entity which created the activity on which this timer is set.

    submission-time

    Date

    The date the timer was created.

    next-firing-time

    Date

    The date the timer will next fire.

    interval

    Long

    The initial time period after the timer was created before the first firing.

    period

    Long

    The timers period, if a repeating timer.

    expiry-time

    Date

    The date that the timer will expire.

    callback-node

    Integer

    The node that will receive a callback with the timer event when the timer next fires. May be null if the assigned callback address for the timer is not currently reachable.

    pops

    Integer

    The number of times that the timer has already fired.

    Active Transaction Search Results

    A CompositeData object containing detailed transaction information is returned by the methods getActiveTransactions(int, int) and getLongRunningTransactions(int, int).

    Field Open Type Description

    node

    Integer

    The node ID of the cluster member on which this transaction was created.

    transaction-id

    Long

    The transaction ID of this transaction.

    age

    Integer

    The age of the transaction, measured in seconds.

    description

    String

    A description of why the transaction was created.

    Event Router State Results

    A CompositeData object containing a snapshot of the status of an event router thread as returned by getEventRouterThreadState(boolean).

    Field

    Type

    Description

    node

    Integer

    The node ID of the cluster member on which this event router thread exists.

    name

    String

    The name of this thread.

    stage

    String

    Stage the thread is processing.

    activity-pkey

    String

    If the thread is processing an event the encoded activity pkey of that events activity.

    event

    String

    If the thread is processing an event the event type id.

    initial

    Boolean

    If the thread is processing an event then indicates whether the event router has created a new root SBB for the event.

    tx-id

    Long

    If the thread has started an event processing transaction then the id of the transaction.

    service-component-id

    String

    If the thread is processing an event and determined which SBB it will deliver to then the SBB’s service component id.

    sbb-component-id

    String

    If the thread is processing an event and determined which SBB it will deliver to then the SBB’s service component id.

    Transaction State Information

    A CompositeData object containing transaction state information as returned by getTransactionStateInfo(int, long).

    Field

    Type

    Description

    id

    String

    A string representation of the transaction identifier.

    description

    String

    A description of the transaction, if provided when the transaction was started.

    start-time

    Date

    The time the transaction was started.

    last-update-time

    Date

    The time of the most recent transaction status change.

    status

    String

    The current status of the transaction.

    outstanding-resources

    Tabular Data

    The list of resources the transaction manager is still waiting on for this transaction. This list will only contain entries if the transaction status is PREPARING, COMMITTING, or ROLLING_BACK. The format of this tabular data is described in Transaction Resource State Information.

    Transaction Resource State Information

    A CompositeData object containing information about a transactional resource. A TabularData table containing records of this type is included in Transaction State Information.

    Field

    Type

    Description

    resource-name

    String

    The name of the transactional resource.

    diagnostics

    String

    Additional diagnostic information provided by the resource regarding the state of the transaction.

    • Method Detail

      • getActivities

        TabularData getActivities​(int maxPerNode,
                                  boolean includeRemoved)
                           throws ManagementException

        Return summary information about activities in the SLEE.

        The results are returned as TabularData where each entry is a CompositeData containing summary information about a SLEE activity. Refer to Activity Search Results in the interface description for a description of the CompositeData records returned by this method.

        This method is equivalent to invoking getActivities(int, String, long, long, long, long, boolean), passing the parameters getActivities(maxPerNode, null, -1, -1, -1, -1, includeRemoved);

        Parameters:
        maxPerNode - maximum number of activities to return from each node.
        includeRemoved - boolean flag indicating if removed but not yet garbage collected activities should be included in the results.
        Returns:
        activity information as a table of CompositeData records.
        Throws:
        ManagementException
      • getActivities

        TabularData getActivities​(int maxPerNode,
                                  String entityName,
                                  boolean includeRemoved)
                           throws ManagementException,
                                  UnrecognizedResourceAdaptorEntityException

        Return summary information about activities in the SLEE belonging to a specific resource adaptor entity.

        The results are returned as TabularData where each entry is a CompositeData containing summary information about a SLEE activity. Refer to Activity Search Results in the interface description for a description of the CompositeData records returned by this method.

        This method is equivalent to invoking getActivities(int, String, long, long, long, long, boolean), passing the parameters getActivities(maxPerNode, entityName, -1, -1, -1, -1, includeRemoved);

        Parameters:
        maxPerNode - maximum number of entries to return from each node.
        entityName - resource adaptor entity name. May be null to return activities from all resource adaptor entities.
        includeRemoved - boolean flag indicating if removed but not yet garbage collected activities should be included in the results.
        Returns:
        activity information.
        Throws:
        ManagementException
        UnrecognizedResourceAdaptorEntityException
      • getActivities

        TabularData getActivities​(int maxPerNode,
                                  String entityName,
                                  long createdAfter,
                                  long createdBefore,
                                  long updatedAfter,
                                  long updatedBefore,
                                  boolean includeRemoved)
                           throws ManagementException,
                                  UnrecognizedResourceAdaptorEntityException

        Return summary information about active activities in the SLEE, with optional bounds on the owning resource adaptor entity, activity creation time, and last update time.

        This method searches for activities belonging to a particular resource adaptor entity that were created during, or last updated during (meaning the last time an event was processed) a certain time period.

        The results are returned as TabularData where each entry is a CompositeData containing summary information about a SLEE activity. Refer to Activity Search Results in the interface description for a description of the CompositeData records returned by this method.

        Parameters:
        maxPerNode - maximum number of entries to return from each node.
        entityName - resource adaptor entity name. May be null to return activities from all resource adaptor entities.
        createdAfter - if > 0, returns only activities created after timestamp.
        createdBefore - if > 0, returns only activities created before timestamp.
        updatedAfter - if > 0, returns only activities last updated after timestamp.
        updatedBefore - if > 0, returns only activities last updated before timestamp.
        includeRemoved - boolean flag indicating if removed but not yet garbage collected activities should be included in the results.
        Returns:
        activity information.
        Throws:
        ManagementException
        UnrecognizedResourceAdaptorEntityException
      • getActivities

        @Deprecated
        TabularData getActivities​(int maxPerNode,
                                  String entityName,
                                  long createdAfter,
                                  long createdBefore,
                                  long updatedAfter,
                                  long updatedBefore,
                                  boolean includeRemoved,
                                  boolean includeNonResident)
                           throws ManagementException,
                                  UnrecognizedResourceAdaptorEntityException
        Deprecated.
        Support for scanning the key/value store for all non-resident activities has been removed. The includeNonResident argument is now ignored with an assumed value of false, thus this method is now identical in behaviour to getActivities(int, String, long, long, long, long, boolean).

        Return a table of activities belonging to a resource adaptor entity, with optional bounds on activity creation time and last update time.

        This method searches for activities belonging to a particular Resource Adaptor entity that were created during, or last updated during (meaning the last time an event was processed) a certain time period.

        The results are returned as TabularData where each entry is a CompositeData containing summary information about a SLEE activity. Refer to Activity Search Results in the interface description for a description of the CompositeData records returned by this method.

        Parameters:
        maxPerNode - maximum number of entries to return from each node.
        entityName - resource Adaptor entity name. May be null to return activities from all resource adaptor entities.
        createdAfter - if > 0, returns only activities created after timestamp.
        createdBefore - if > 0, returns only activities created before timestamp.
        updatedAfter - if > 0, returns only activities last updated after timestamp.
        updatedBefore - if > 0, returns only activities last updated before timestamp.
        includeRemoved - boolean flag indicating if removed but not yet garbage collected activities should be included in the results.
        includeNonResident - boolean flag indicating if activities not currently resident on any active cluster node should be included in the results. An example of a non-resident activity is one that was replicated via a key/value store whose owning node has left the cluster and the activity has not yet been adopted by any other node. This option is ignored if this housekeeping MBean is a node housekeeping MBean rather than a cluster housekeeping MBean.
        Returns:
        activity information.
        Throws:
        ManagementException
        UnrecognizedResourceAdaptorEntityException
        Since:
        Rhino 2.6.1
      • getRemovedActivities

        TabularData getRemovedActivities​(int maxPerNode,
                                         String entityName,
                                         long createdAfter,
                                         long createdBefore,
                                         long updatedAfter,
                                         long updatedBefore)
                                  throws ManagementException,
                                         UnrecognizedResourceAdaptorEntityException

        Return summary information about removed but not yet garbage collected activities in the SLEE, with optional bounds on the owning resource adaptor entity, activity creation time, and last update time.

        This method searches for activities belonging to a particular resource adaptor entity that were created during, or last updated during (meaning the time the activity was removed) a certain time period.

        The results are returned as TabularData where each entry is a CompositeData containing summary information about a SLEE activity. Refer to Activity Search Results in the interface description for a description of the CompositeData records returned by this method.

        Parameters:
        maxPerNode - maximum number of entries to return from each node.
        entityName - resource adaptor entity name. May be null to return activities from all resource adaptor entities.
        createdAfter - if > 0, returns only activities created after timestamp.
        createdBefore - if > 0, returns only activities created before timestamp.
        updatedAfter - if > 0, returns only activities last updated after timestamp.
        updatedBefore - if > 0, returns only activities last updated before timestamp.
        Returns:
        activity information.
        Throws:
        ManagementException
        UnrecognizedResourceAdaptorEntityException
        Since:
        Rhino 2.6.2
      • getAttachedActivities

        TabularData getAttachedActivities​(int maxPerNode,
                                          ServiceID serviceID,
                                          SbbID sbbID,
                                          String sbbPKey,
                                          boolean nonResident)
                                   throws InvalidPKeyException,
                                          ManagementException,
                                          UnrecognizedServiceException,
                                          UnrecognizedSbbException,
                                          UnknownSbbEntityException

        Return a table of activities attached to an SBB entity.

        Returns a list of activities and basic activity information for activities that a particular SBB entity is currently attached to. Results are returned as a TabularData table of records. Refer to Attached Activities Search Results in the interface description for a description of the CompositeData records returned. In-memory database state will be checked first for presence of the SBB entity. If the SBB entity not found there and the nonResident argument is true, this method will also check non-resident SBB entities, such as those maintained externally by a key/value store, that are not currently owned by any active cluster node.

        Parameters:
        maxPerNode - maximum number of entries to return from each node.
        serviceID - ServiceID of the Service containing the SBB.
        sbbID - SbbID of the SBB’s component.
        sbbPKey - primary key of the SBB (usually a value returned by getSbbs(int, javax.slee.ServiceID, javax.slee.SbbID, long, long))
        nonResident - boolean flag indicating if SBB entities not currently resident on any active cluster node should be checked for presence of the specified SBB entity.
        Returns:
        activity information.
        Throws:
        InvalidPKeyException - if the SBB primary key is invalid.
        UnrecognizedServiceException - if the service ID doesn’t match any deployed service.
        UnrecognizedSbbException - if the SBB component ID doesn’t match any SBB component belonging to the specified service.
        UnknownSbbEntityException - if no SBB entity matching the specified primary key is found - may indicate that the SBB entity has already been removed by the SLEE.
        ManagementException - if a system level failure occurs.
        Since:
        Rhino 2.6.2
      • getSbbs

        TabularData getSbbs​(int maxPerNode,
                            ServiceID serviceID,
                            long createdAfter,
                            long createdBefore)
                     throws ManagementException,
                            UnrecognizedServiceException

        Return a table of SBB entities belonging to a Service

        This method searches for and returns a list of SBB entities belonging to a particular service with a constraint on the time the SBB entity was created. Results are returned in a TabularData table. For details on the row type for the returned data refer to SBB Entity Search Results in the interface description.

        This method is equivalent to invoking getSbbs(int, ServiceID, SbbID, long, long), passing the parameters getSbbs(maxPerNode, serviceID, null, createdAfter, createdBefore);

        Parameters:
        maxPerNode - maximum number of entries to return from each node.
        serviceID - ServiceID of the Service containing the SBB.
        createdAfter - if > 0, returns only SBB entities created after timestamp.
        createdBefore - if > 0, returns only SBB entities created before timestamp.
        Returns:
        a TabularData table of SBB information.
        Throws:
        NullPointerException - if service is null.
        UnrecognizedServiceException - if the service ID doesn’t match any deployed service.
        ManagementException - if a system failure occurs.
      • getSbbs

        TabularData getSbbs​(int maxPerNode,
                            ServiceID serviceID,
                            SbbID sbbType,
                            long createdAfter,
                            long createdBefore)
                     throws ManagementException,
                            UnrecognizedSbbException,
                            UnrecognizedServiceException

        Returns a table of SBB entities constrained by service component id, SBB component id and creation time

        Searches within a service and SBB component type for SBB’s. Optionally a timeframe may be specified limiting the search to SBB’s created only during that time period. This method is useful for finding old, potentially 'stale' SBB entities. For details on the row type for the returned data refer to SBB Entity Search Results in the interface description.

        Parameters:
        maxPerNode - maximum number of entries to return from each node.
        serviceID - ServiceID of the Service containing the SBB.
        sbbType - SBB component ID of the type of SBB to search for.
        createdAfter - if > 0, returns only SBB entities created after timestamp.
        createdBefore - if > 0, returns only SBB entities created before timestamp.
        Returns:
        SBB information.
        Throws:
        NullPointerException - if service is null.
        UnrecognizedServiceException - if the service ID doesn’t match any deployed service.
        UnrecognizedSbbException - if the SBB component ID doesn’t match any SBB component belonging to the specified service.
        ManagementException - if a system failure occurs.
      • getSbbs

        @Deprecated
        TabularData getSbbs​(int maxPerNode,
                            ServiceID serviceID,
                            SbbID sbbType,
                            long createdAfter,
                            long createdBefore,
                            boolean includeNonResident)
                     throws ManagementException,
                            UnrecognizedSbbException,
                            UnrecognizedServiceException
        Deprecated.
        Support for scanning the key/value store for all non-resident SBB entities has been removed. The includeNonResident argument is now ignored with an assumed value of false, thus this method is now identical in behaviour to getSbbs(int, ServiceID, SbbID, long, long).

        Returns a table of SBB entities constrained by service component id, SBB component id and creation time

        Searches within a service and SBB component type for SBB’s. Optionally a timeframe may be specified limiting the search to SBB’s created only during that time period. This method is useful for finding old, potentially 'stale' SBB entities. For details on the row type for the returned data refer to SBB Entity Search Results in the interface description.

        Parameters:
        maxPerNode - maximum number of entries to return from each node.
        serviceID - ServiceID of the Service containing the SBB.
        sbbType - SBB component ID of the type of SBB to search for.
        createdAfter - if > 0, returns only SBB entities created after timestamp.
        createdBefore - if > 0, returns only SBB entities created before timestamp.
        includeNonResident - boolean flag indicating if SBBs not currently resident on any active cluster node should be included in the results. An example of a non-resident SBB is one that was replicated via a key/value store whose owning node has left the cluster and the SBB has not yet been adopted by any other node. This option is ignored if this housekeeping MBean is a node housekeeping MBean rather than a cluster housekeeping MBean.
        Returns:
        SBB information.
        Throws:
        NullPointerException - if service is null.
        UnrecognizedServiceException - if the service ID doesn’t match any deployed service.
        UnrecognizedSbbException - if the SBB component ID doesn’t match any SBB component belonging to the specified service.
        ManagementException - if a system failure occurs.
        Since:
        Rhino 2.6.1
      • getTimers

        TabularData getTimers​(int maxPerNode)
                       throws ManagementException

        Find active SLEE timers

        Returns a table containing JAIN SLEE Timer Facility timers and basic information about each timer.

        For a description of the CompositeData result type returned by this method refer to Timer Search Results in the interface description.

        Parameters:
        maxPerNode - maximum number of entries to return from each node.
        Returns:
        timer information.
        Throws:
        ManagementException - if a system failure occurs.
      • getTimers

        TabularData getTimers​(int maxPerNode,
                              String raEntity,
                              long createdAfter,
                              long createdBefore)
                       throws ManagementException

        Find active SLEE timers

        Returns a table containing JAIN SLEE Timer Facility timers and basic information about each timer. The search can be limited to timers created within a particular time period.

        For a description of the CompositeData result type returned by this method refer to Timer Search Results in the interface description.

        Parameters:
        maxPerNode - maximum number of entries to return from each node.
        raEntity - if not null only timers set on activities belonging to this RA entity will be returned.
        createdAfter - if > 0, returns only timers created after timestamp.
        createdBefore - if > 0, returns only timers created before timestamp.
        Returns:
        timer information.
        Throws:
        ManagementException - if a system failure occurs.
      • getRemoteTimers

        TabularData getRemoteTimers​(int maxPerNode)
                             throws ManagementException

        Find remote SLEE timers.

        Returns a table containing remote timers and basic information about each timer. This operation returns information about the remote timers that are armed on a node, not the timers that a node has requested to be armed remotely.

        For a description of the CompositeData result type returned by this method refer to Remote Timer Search Results in the interface description.

        Parameters:
        maxPerNode - maximum number of entries to return from each node.
        Returns:
        remote timer information.
        Throws:
        ManagementException - if a system failure occurs.
        Since:
        Rhino 2.6.2
      • getRemoteTimers

        TabularData getRemoteTimers​(int maxPerNode,
                                    String raEntity,
                                    long createdAfter,
                                    long createdBefore)
                             throws ManagementException

        Find remote SLEE timers.

        Returns a table containing remote timers and basic information about each timer. This operation returns information about the remote timers that are armed on a node, not the timers that a node has requested to be armed remotely. The search can be limited to timers created within a particular time period.

        For a description of the CompositeData result type returned by this method refer to Remote Timer Search Results in the interface description.

        Parameters:
        maxPerNode - maximum number of entries to return from each node.
        raEntity - if not null only timers set on activities belonging to this RA entity will be returned.
        createdAfter - if > 0, returns only timers created after timestamp.
        createdBefore - if > 0, returns only timers created before timestamp.
        Returns:
        timer information.
        Throws:
        ManagementException - if a system failure occurs.
        Since:
        Rhino 2.6.2
      • getBoundActivities

        TabularData getBoundActivities​(int maxPerNode)
                                throws ManagementException

        Find activity context naming facility bindings.

        Returns a table containing JAIN SLEE Activity Context Naming facility bindings and basic information about each binding, including the name bound and the activities primary key.

        For a description of the CompositeData result type returned by this method refer to Activity Context Binding Search Results in the interface description.

        Parameters:
        maxPerNode - maximum number of entries to return from each node.
        Returns:
        activity context naming bindings.
        Throws:
        ManagementException
      • getBoundActivities

        TabularData getBoundActivities​(int maxPerNode,
                                       long createdAfter,
                                       long createdBefore)
                                throws ManagementException

        Find activity context naming facility bindings.

        Returns a table containing JAIN SLEE Activity Context Naming facility bindings and basic information about each binding, including the name bound and the activities primary key. The search can be limited to bindings created within a particular time period.

        For a description of the CompositeData result type returned by this method refer to Activity Context Binding Search Results in the interface description.

        Parameters:
        maxPerNode - maximum number of entries to return from each node.
        createdAfter - if > 0, returns only bindings created after timestamp.
        createdBefore - if > 0, returns only bindings created before timestamp.
        Returns:
        activity context naming bindings.
        Throws:
        ManagementException
      • getSbbInfo

        CompositeData getSbbInfo​(ServiceID serviceID,
                                 SbbID sbbID,
                                 String sbbPKey,
                                 boolean nonResident)
                          throws ManagementException,
                                 InvalidPKeyException,
                                 UnrecognizedSbbException,
                                 UnrecognizedServiceException,
                                 UnknownSbbEntityException

        Return detailed information about the state of a particular SBB entity.

        This method returns detailed information about an SBB entity contained within the SLEE. To locate the SBB entity to inspect the SBB entities service, SBB component ID and primary key are required. SBB entities primary keys are found using getSbbs(int, javax.slee.ServiceID, javax.slee.SbbID, long, long). In-memory database state will be checked first for presence of the SBB entity. If the SBB entity not found there and the nonResident argument is true, this method will also check non-resident SBB entities, such as those maintained externally by a key/value store, that are not currently owned by any active cluster node.

        For a description of the CompositeData result type returned by this method refer to SBB Entity Information in the interface description.

        Parameters:
        serviceID - ServiceID of the Service containing the SBB.
        sbbID - SbbID of the SBB’s component.
        sbbPKey - primary key of the SBB (usually a value returned by getSbbs(int, ServiceID)).
        nonResident - boolean flag indicating if SBB entities not currently resident on any active cluster node should be checked for presence of the specified SBB entity.
        Returns:
        detailed SBB entity information.
        Throws:
        InvalidPKeyException - if the SBB primary key is invalid.
        UnrecognizedServiceException - if the service ID doesn’t match any deployed service.
        UnrecognizedSbbException - if the SBB component ID doesn’t match any SBB component belonging to the specified service.
        UnknownSbbEntityException - if no SBB entity matching the specified primary key is found - may indicate that the SBB entity has already been removed by the SLEE.
        ManagementException - if a system level failure occurs.
        Since:
        Rhino 2.6.2
      • getSbbDiagnostics

        CompositeData getSbbDiagnostics​(ServiceID serviceID,
                                        SbbID sbbID,
                                        String sbbPKey,
                                        boolean nonResident)
                                 throws ManagementException,
                                        InvalidPKeyException,
                                        UnrecognizedSbbException,
                                        UnrecognizedServiceException,
                                        UnknownSbbEntityException

        Return diagnostic information about the state of a particular SBB entity.

        This method returns detailed information about an SBB entity contained within the SLEE. To locate the SBB entity to inspect the SBB entities service, SBB component ID and primary key are required. SBB entities primary keys are found using getSbbs(int, javax.slee.ServiceID, javax.slee.SbbID, long, long). In-memory database state will be checked first for presence of the SBB entity. If the SBB entity not found there and the nonResident argument is true, this method will also check non-resident SBB entities, such as those maintained externally by a key/value store, that are not currently owned by any active cluster node.

        For a description of the CompositeData result type returned by this method refer to SBB Entity Diagnostic Information in the interface description.

        Parameters:
        serviceID - ServiceID of the Service containing the SBB.
        sbbID - SbbID of the SBB’s component.
        sbbPKey - primary key of the SBB (usually a value returned by getSbbs(int, ServiceID)).
        nonResident - boolean flag indicating if SBB entities not currently resident on any active cluster node should be checked for presence of the specified SBB entity.
        Returns:
        detailed SBB entity information.
        Throws:
        InvalidPKeyException - if the SBB primary key is invalid.
        UnrecognizedServiceException - if the service ID doesn’t match any deployed service.
        UnrecognizedSbbException - if the SBB component ID doesn’t match any SBB component belonging to the specified service.
        UnknownSbbEntityException - if no SBB entity matching the specified primary key is found - may indicate that the SBB entity has already been removed by the SLEE.
        ManagementException - if a system level failure occurs.
        Since:
        Rhino 2.6.2
      • cancelRemoteTimer

        void cancelRemoteTimer​(String remoteTimerID)
                        throws InvalidPKeyException,
                               UnknownTimerException,
                               ManagementException

        Cancel a remote timer.

        This method cancels a remotely armed timer. Cancelling a remote timer prevents the timer from triggering activity adoption by another node in the event that the target node of remote timer event callbacks fails. Cancelling a remote timer does not itself affect any associated local SLEE timer, ie. the local timer will still fire unless it is also cancelled (or it expires).

        This method requires the remote timer’s primary key as returned by getRemoteTimers(int, java.lang.String, long, long).

        Parameters:
        remoteTimerID - encoded remote timer id.
        Throws:
        UnknownTimerException - if no remote timer can be found with the specified primary key - may indicate that the timer has expired or the underlying activity has already ended and all its SLEE state removed.
        InvalidPKeyException - if the remote timer primary key is invalid.
        ManagementException - if a system failure occurs.
        Since:
        Rhino 2.6.2
      • removeActivityBinding

        void removeActivityBinding​(String activityPKey,
                                   String name,
                                   boolean nonResident)
                            throws ManagementException,
                                   InvalidPKeyException,
                                   UnknownActivityException,
                                   NameNotBoundException

        Remove an activity context naming facility binding.

        Caution: This method irrevocably removes application state.

        Names bound in the activity context naming facility can be located using getBoundActivities(int, long, long))

        Parameters:
        activityPKey - the bound activity.
        name - the bound name.
        nonResident - boolean flag indicating if activities not currently resident on any node in the cluster should be checked for the given name binding.
        Throws:
        UnknownActivityException - if no activity can be found with the specified primary key - may indicate that the activity has already ended and all its SLEE state removed.
        NameNotBoundException - if the name is not known to the activity context naming facility, or if the specified activity is not bound to it - may indicate that the name has already been unbound.
        InvalidPKeyException - if the activity primary key is invalid.
        ManagementException - if a system failure occurs.
        Since:
        Rhino 2.6.2
      • removeActivity

        void removeActivity​(String activityPKey)
                     throws ManagementException,
                            InvalidPKeyException,
                            UnknownActivityException

        Remove an activity.

        Caution: This method irrevocably removes application state.

        This method forcibly ends an activity in the SLEE and should be used with caution. Stale activities or activities that might be considered candidates for forced removal can be found using getActivities(int, String, long, long, long, long, boolean).

        Note that Rhino’s own internal query liveness mechanism is sufficient for normal removal of stale activities. Removal of an activity using this method should only be required in the case of a resource adaptor or external resource error preventing Rhino’s query liveness from detecting that the activity is stale.

        Note that this method can only remove activities for which the invoked Rhino node (ie. the instance of this MBean as returned by RhinoHousekeepingMBean.getNodeHousekeeping(int)) is the processing node. An activity’s processing node can be queried using getActivityInfo(String, boolean).

        This method is equivalent to invoking removeActivity(String, boolean), passing the parameters removeActivity(activityPKey, false);.

        Parameters:
        activityPKey - string encoded activity primary key.
        Throws:
        UnknownActivityException - if no activity can be found with the specified primary key - may indicate that the activity has already ended and all its SLEE state removed.
        InvalidPKeyException - if the activity primary key is invalid.
        ManagementException - if a system failure occurs.
      • removeActivity

        void removeActivity​(String activityPKey,
                            boolean nonResident)
                     throws ManagementException,
                            InvalidPKeyException,
                            UnknownActivityException

        Remove an activity.

        Caution: This method irrevocably removes application state.

        This method forcibly ends an activity in the SLEE and should be used with caution. Stale activities or activities that might be considered candidates for forced removal can be found using getActivities(int, String, long, long, long, long, boolean).

        Note that Rhino’s own internal query liveness mechanism is sufficient for normal removal of stale activities. Removal of an activity using this method should only be required in the case of a resource adaptor or external resource error preventing Rhino’s query liveness from detecting that the activity is stale.

        Note that normally this method can only remove activities for which the invoked Rhino node (ie. the instance of this MBean as returned by RhinoHousekeepingMBean.getNodeHousekeeping(int)) is the processing node. An activity’s processing node can be queried using getActivityInfo(String, boolean, boolean). If the nonResident argument is true, this method will also check non-resident activities, such as those maintained externally by a key/value store, that are not currently owned by any active cluster node.

        Parameters:
        activityPKey - string encoded activity primary key.
        nonResident - boolean flag indicating if activities not currently resident on any active cluster node should be checked for presence of the specified activity.
        Throws:
        UnknownActivityException - if no activity can be found with the specified primary key - may indicate that the activity has already ended and all its SLEE state removed.
        InvalidPKeyException - if the activity primary key is invalid.
        ManagementException - if a system failure occurs.
        Since:
        Rhino 2.6.1
      • getActiveTransactions

        TabularData getActiveTransactions​(int maxPerNode,
                                          int minAge)
                                   throws InvalidArgumentException,
                                          ManagementException

        Return summary information about active transactions in the SLEE.

        The results are returned as TabularData, where each entry is a CompositeData containing summary information about a transaction. Refer to Active Transaction Search Results in the interface descriptor for a descriptor of the CompositeData records returned by this method.

        Parameters:
        maxPerNode - maximum number of transactions to return from each node.
        minAge - minimum age, measured in seconds, of transactions to include in the return result. The minimum value for this argument is 0.
        Returns:
        transaction information as a table of CompositeData records.
        Throws:
        InvalidArgumentException - if minAge is negative.
        ManagementException - if a system failure occurs.
        Since:
        Rhino 3.1.0
      • getLongRunningTransactions

        @Deprecated
        TabularData getLongRunningTransactions​(int maxPerNode,
                                               int minAge)
                                        throws InvalidArgumentException,
                                               ManagementException
        Deprecated.
        Replaced with getActiveTransactions(int, int) which is a more generalised version of this operation.

        Return summary information about long-running transactions in the SLEE. Long running transaction can occur when a profile MBean is left in the read-write state for a prolonged period of time, a client-demarcated user transaction is left active for a prolonged period of time, or a particular management operation takes a long time to complete.

        The results are returned as TabularData, where each entry is a CompositeData containing summary information about a transaction. Refer to Active Transaction Search Results in the interface descriptor for a descriptor of the CompositeData records returned by this method.

        Parameters:
        maxPerNode - maximum number of transactions to return from each node.
        minAge - minimum age, measured in seconds, of transactions to include in the return result. The minimum value for this argument is 30s.
        Returns:
        transaction information as a table of CompositeData records.
        Throws:
        InvalidArgumentException - if minAge is less than 30.
        ManagementException - if a system failure occurs.
      • rollbackLongRunningTransaction

        void rollbackLongRunningTransaction​(int nodeID,
                                            long transactionID)
                                     throws javax.transaction.InvalidTransactionException,
                                            ManagementException

        Force rollback of a long-running transaction. The transaction must still be active and must have been started at least 30s ago.

        Parameters:
        nodeID - The node ID of the cluster member on which the transaction was created.
        transactionID - the transaction ID of the transaction.
        Throws:
        javax.transaction.InvalidTransactionException - if the specified transaction does not exist, is not in the ACTIVE or MARKED FOR ROLLBACK state, or is less than 30s in age.
        ManagementException - if a system failure occurs.
      • getTransactionStateInfo

        CompositeData getTransactionStateInfo​(int nodeID,
                                              long transactionID)
                                       throws javax.transaction.InvalidTransactionException,
                                              ManagementException

        Get information about a transaction. For details on the returned data refer to Transaction State Information in the interface description.

        Parameters:
        nodeID - The node ID of the cluster member on which the transaction was created.
        transactionID - the transaction ID of the transaction.
        Throws:
        javax.transaction.InvalidTransactionException - if the specified transaction does not exist.
        ManagementException - if a system failure occurs.
      • initiateGlobalCleanup

        void initiateGlobalCleanup()
                            throws ManagementException

        Initiate a cleanup of all in-memory database and activity state. This includes:

        • all in-memory database instances

        • all activities in all namespaces that have been removed but not yet garbage collected.

        Throws:
        ManagementException - if a system failure occurs.
        Since:
        Rhino 2.7.0
      • getNodesWithPerNodeActivationState

        int[] getNodesWithPerNodeActivationState()
                                          throws ManagementException

        Get the set of node IDs for which per-node desired state currently exists.

        Returns:
        the set of node IDs for which per-node desired state currently exists.
        Throws:
        ManagementException - if the node IDs could not be obtained due to a system-level failure.
      • hasPerNodeActivationState

        boolean hasPerNodeActivationState()
                                   throws UnsupportedOperationException,
                                          ManagementException

        Determine if this node has any per-node desired state in existence.

        Returns:
        true if this node has any per-node desired state, false otherwise.
        Throws:
        UnsupportedOperationException - if this method is invoked on an instance of a NodeHousekeepingMBean created for the cluster rather than a single node.
        ManagementException - if the presence of per-node desired state could not be determined due to a system-level failure.
      • copyPerNodeActivationState

        boolean copyPerNodeActivationState​(int targetNodeID)
                                    throws UnsupportedOperationException,
                                           InvalidArgumentException,
                                           InvalidStateException,
                                           ManagementException

        Copy the current per-node desired state of services, resource adaptor entities, and the SLEE from this node to the specified target node. This will overwrite the current per-node settings of the target node, and will trigger convergence towards the new desired state if it differs from the current actual state. This will also delete any per-node state from the target which is not present on this node.

        Parameters:
        targetNodeID - the node ID of the node to copy state to.
        Returns:
        true if per-node activation state changed for the target node, false if the target node already had the same per-node activation state.
        Throws:
        UnsupportedOperationException - if this method is invoked on an instance of a NodeHousekeepingMBean created for the cluster rather than a single node.
        InvalidArgumentException - if targetNodeID is an invalid node ID.
        InvalidStateException - no longer thrown as of Rhino 3.0.0
        ManagementException - if the per-node activation state cannot be copied due to a system-level failure.
      • removePerNodeActivationState

        boolean removePerNodeActivationState()
                                      throws UnsupportedOperationException,
                                             InvalidStateException,
                                             ManagementException

        Remove all per-node desired state for services, resource adaptor entities, and the SLEE from this node.

        Returns:
        true if per-node desired state was found and removed, false if no per-node desired state was found for this node.
        Throws:
        UnsupportedOperationException - if this method is invoked on an instance of a NodeHousekeepingMBean created for the cluster rather than a single node.
        InvalidStateException - if targetNodeID is currently a member of the cluster.
        ManagementException - if the per-node desired state cannot be removed due to a system-level failure.
      • getDesiredStates

        String getDesiredStates()
                         throws ManagementException

        Get a summary report of all default and per-node desired states set for services, resource adaptor entities, and the SLEE.

        This method returns a JSON-formatted string that reports the default desired state set for every stateful entity. The report also includes information on any per-node desired state where it has been set, regardless of whether or not the target node is a current cluster member.

        Returns:
        a JSON-formatted string reporting the current default and per-node desired states.
        Throws:
        ManagementException - if the current state cannot be determined due to a system-level error.
        Since:
        Rhino 3.0.0
      • getEventRouterThreadState

        TabularData getEventRouterThreadState​(boolean includeIdleThreads)
                                       throws ManagementException

        Retrieve the current status of all event router threads.

        The returned table contains a breakdown of the current task of each event router thread at approximately the same point in time. Event router thread states are read concurrently without interrupting event processing so the result is not guaranteed to be an accurate point in time snapshot only an approximation.

        For details on the row type for the returned data refer to Event Router State Results in the interface description.

        Parameters:
        includeIdleThreads - if true even idle threads will be included in the result
        Returns:
        event router thread state as a table of CompositeData records
        Throws:
        ManagementException - if event router state cannot be read because of a system level failure
      • getLocalMemDBStripingNodeConfig

        TabularData getLocalMemDBStripingNodeConfig()
                                             throws ManagementException

        Returns the current MemDB striping configuration for local MemDB instances on this node.

        The striping config is returned in TabularData format - one row is returned per local MemDB instance. Each row contains the following information:

        Field Open Type Description

        memdb-resource

        String

        Memdb resource name

        stripe-count

        Integer

        The stripe count

        Returns:
        TabularData containing node striping configuration information.
        Throws:
        ManagementException - if an internal error occurs.