Package com.opencloud.rhino.snmp

Interface SNMPManagementMBean

public interface SNMPManagementMBean

The SNMPManagementMBean interface provides methods to interact with the global configuration of Rhino’s SNMP agent.

Field Summary

Fields

Modifier and Type	Field	Description
static String	MBEAN_NAME	The name of this MBean, equal to the string "SNMP".
static String	OBJECT_NAME	The JMX Object Name of this MBean.

Method Summary

Modifier and Type	Method	Description
void	addNotificationTarget(String version, String address)	Adds a notification target.
void	clearCounterMapping(String parameterSetTypeName, String counterName)	Deprecated. Use SNMPParameterSetTypeMBean.clearCounterMapping(String) instead.
void	clearNodeConfigs()	Clears saved SNMP address/port bindings for all nodes (including nodes which are not currently part of the cluster).
void	clearNodeConfigs(short[] nodes)	Clears saved SNMP address/port bindings for the specified nodes.
void	clearOIDMapping(String parameterSetTypeName)	Deprecated. Use SNMPParameterSetTypeMBean.clearOIDMapping() instead.
TabularData	getAgentState()	Returns the current active state of the SNMP agent on each Rhino node.
String	getCommunity()	Returns the SNMP community name.
String	getContact()	Returns the SNMPv2-MIB sysContact field value.
int	getCounterMapping(String parameterSetTypeName, String counterName)	Deprecated. Use SNMPParameterSetTypeMBean.getCounterMapping(String) instead.
TabularData	getCounterMappings()	Deprecated. Use SNMPParameterSetTypeManagementMBean.getAllCounterMappings() instead.
int	getDefaultHighPort()	Returns the upper bound of the port range the SNMP agent uses for port binding when a node has not been explicitly configured to use a particular port.
int	getDefaultLowPort()	Returns the lower bound of the port range the SNMP agent uses for port binding when a node has not been explicitly configured to use a particular port.
String	getDefaultSubnet()	Returns the default subnet the SNMP agent will use to find an address to bind to (if a node doesn’t have saved address binding information).
String	getDescription()	Returns the SNMPv2-MIB sysDescr field value.
String[]	getEnabledProtocolVersions()	Returns a string array containing the currently enabled SNMP protocol versions.
int	getEngineBoots()	Returns the V3 EngineBoots count.
Map<Integer,String>	getEngineIDs()	Returns a map of node IDs to local engine IDs.
int	getEngineTime()	Returns the V3 EngineTime.
String	getLocation()	Returns the SNMPv2-MIB sysLocation field value.
TabularData	getMIBs()	Returns MIB definitions for all parameter set types and notification types that currently exist.
String	getName()	Returns the SNMPv2-MIB sysName field value.
short[]	getNodeConfigIDs()	Returns a list of all nodes which have saved SNMP data.
TabularData	getNodeConfigs()	Returns the current saved state of the SNMP agent for each Rhino node.
String	getNotificationAddress()	Deprecated.
boolean	getNotificationConfig(String type)	Returns true if an SNMP notification will be sent for the specified notification type.
TabularData	getNotificationConfigs()	Returns the current notification configs as TabularData.
int	getNotificationPort()	Deprecated.
String[]	getNotificationTargets()	Returns an array containing currently configured notification targets.
String[]	getNotificationTypeNames()	Returns an array of strings containing the type names which can be used with setNotificationFilter and getNotificationFilter.
String	getOIDMapping(String parameterSetTypeName)	Deprecated. Use SNMPParameterSetTypeMBean.getOIDMapping() instead.
TabularData	getOIDMappings()	Deprecated. Use SNMPParameterSetTypeManagementMBean.getAllOIDMappings() instead.
ObjectName	getSNMPNodeMBean(short nodeID)	Returns the ObjectName of the JMX object providing the SNMPNodeMBean management interface for the specified node.
String	getUserEngineID()	Returns the user specified portion of the EngineID.
String	getv3AuthenticationKey()	Returns the SNMP v3 authentication key.
String	getv3AuthenticationProtocol()	Returns the SNMP v3 authentication protocol.
String[]	getv3AuthenticationProtocols()	Returns the valid SNMP v3 authentication protocols.
String	getv3PrivacyKey()	Returns the SNMP v3 privacy key.
String	getv3PrivacyProtocol()	Returns the SNMP v3 privacy protocol.
String[]	getv3PrivacyProtocols()	Returns the valid SNMP v3 privacy protocols.
String	getv3Username()	Returns the SNMP v3 username.
boolean	isAddressBindingsSaved()	Returns whether the initial address bindings are preserved over node restart.
boolean	isEnabled()	Returns true if the Rhino SNMP agent is current configured to be enabled.
boolean	isLoopbackAddressesAllowed()	Returns whether loopback addresses (e.g. 127.0.0.1) will be considered when the SNMP agent looks for local interfaces to bind to.
boolean	isNotificationsEnabled()	Returns true if the Rhino SNMP agent is configured to send SNMP notifications.
boolean	isPortBindingsSaved()	Returns whether the initial port bindings are preserved over node restart.
void	removeNotificationTarget(String target)	Removes a notification target.
void	setAddressBindingsSaved(boolean saved)	Sets whether the initial address bindings are preserved over node restart.
void	setCommunity(String communityName)	Sets the SNMP community name.
void	setContact(String contact)	Sets the contact string for the SNMP agent.
void	setCounterMapping(String parameterSetTypeName, String counterName, int index)	Deprecated. Use SNMPParameterSetTypeMBean.setCounterMapping(String, int) instead.
void	setDefaultHighPort(int port)	Sets the upper bound of the port range the SNMP agent uses for port binding when a node has not been explicitly configured to use a particular port.
void	setDefaultLowPort(int port)	Sets the lower bound of the port range the SNMP agent uses for port binding when a node has not been explicitly configured to use a particular port.
void	setDefaultPortRange(int lowPort, int highPort)	Sets the default port range the SNMP agent will use to bind to for nodes which have not been explicitly configured.
void	setDefaultSubnet(String subnet)	Sets the default subnet the SNMP agent will use to find local addresses to bind to when a node has not been explicitly configured to use an address.
void	setDescription(String description)	Sets the description string for the SNMP agent.
void	setDetails(String name, String description, String contact, String location)	Sets the name, description, contact, and location strings for the SNMP agent.
void	setEnabled(boolean enabled)	Sets the desired state of the SNMP agent.
void	setLocation(String location)	Sets the location string for the SNMP agent.
void	setLoopbackAddressesAllowed(boolean allowed)	Sets whether loopback addresses (e.g. 127.0.0.1) will be considered when the SNMP agent looks for local interfaces to bind to.
void	setName(String name)	Sets the name string for the SNMP agent.
void	setNotificationAddress(String address)	Deprecated.
void	setNotificationConfig(String type, boolean enabled)	Sets whether SNMP notifications will be sent for the specified notification type.
void	setNotificationPort(int port)	Deprecated.
void	setNotificationsEnabled(boolean enabled)	Sets whether notifications are delivered by the SNMP agent.
void	setNotificationTarget(String address, int port)	Deprecated.
void	setOIDMapping(String parameterSetTypeName, String OID)	Deprecated. Use SNMPParameterSetTypeMBean.setOIDMapping(String) instead.
void	setPortBindingsSaved(boolean saved)	Sets whether the initial port bindings are preserved over node restart.
void	setProtocolVersionsEnabled(String[] versions, boolean enabled)	Enables or disables the specified SNMP protocol versions.
void	setUserEngineID(String octetString)	Sets the user specifiable portion of the EngineID used on each node.
void	setv3AuthenticationDetails(String protocol, String key)	Sets the SNMP v3 authentication protocol.
void	setv3AuthenticationKey(String value)	Sets the SNMP v3 authentication key.
void	setv3PrivacyDetails(String protocol, String key)	Sets the SNMP v3 privacy protocol.
void	setv3PrivacyKey(String value)	Sets the SNMP v3 privacy key.
void	setv3UserDetails(String name, String authenticationProtocol, String authenticationKey, String privacyProtocol, String privacyKey)	Sets the SNMP v3 user details.
void	setv3Username(String username)	Sets the SNMP v3 username.

Field Detail

MBEAN_NAME

static final String MBEAN_NAME

The name of this MBean, equal to the string "SNMP".

See Also:

Constant Field Values

OBJECT_NAME

static final String OBJECT_NAME

The JMX Object Name of this MBean.

Method Detail

isEnabled

boolean isEnabled()
           throws ConfigurationException

Returns true if the Rhino SNMP agent is current configured to be enabled. This may differ from the actual state of the agent on a particular node and should thus be considered the 'desired' state of the SNMP agent.

Throws:

ConfigurationException - if the SNMP configuration could not be read.

setEnabled

void setEnabled(boolean enabled)
         throws ConfigurationException,
                IllegalStateException

Sets the desired state of the SNMP agent.

Parameters:

enabled - if true, sets the desired state of the SNMP agent to enabled.

Throws:

ConfigurationException - if the SNMP configuration could not be read or updated.

IllegalStateException - if the SNMP agent is in the wrong state for this operation.

getDefaultSubnet

String getDefaultSubnet()
                 throws ConfigurationException,
                        IllegalArgumentException

Returns the default subnet the SNMP agent will use to find an address to bind to (if a node doesn’t have saved address binding information).

Throws:

ConfigurationException

IllegalArgumentException

setDefaultSubnet

void setDefaultSubnet(String subnet)
               throws ConfigurationException,
                      IllegalArgumentException

Sets the default subnet the SNMP agent will use to find local addresses to bind to when a node has not been explicitly configured to use an address.

Parameters:

subnet -

Throws:

ConfigurationException

IllegalArgumentException

setDefaultPortRange

void setDefaultPortRange(int lowPort,
                         int highPort)
                  throws ConfigurationException,
                         IllegalArgumentException

Sets the default port range the SNMP agent will use to bind to for nodes which have not been explicitly configured. This can be explicitly overridden on a per-node basis. This method is provided as an atomic equivalent of calling setDefaultLowPort() and setDefaultHighPort()

Parameters:

lowPort -

highPort -

Throws:

ConfigurationException

IllegalArgumentException

setDefaultLowPort

void setDefaultLowPort(int port)
                throws ConfigurationException,
                       IllegalArgumentException

Sets the lower bound of the port range the SNMP agent uses for port binding when a node has not been explicitly configured to use a particular port.

Parameters:

port -

Throws:

ConfigurationException

IllegalArgumentException

getDefaultLowPort

int getDefaultLowPort()
               throws ConfigurationException,
                      IllegalArgumentException

Returns the lower bound of the port range the SNMP agent uses for port binding when a node has not been explicitly configured to use a particular port.

Throws:

ConfigurationException

IllegalArgumentException

setDefaultHighPort

void setDefaultHighPort(int port)
                 throws ConfigurationException,
                        IllegalArgumentException

Sets the upper bound of the port range the SNMP agent uses for port binding when a node has not been explicitly configured to use a particular port.

Parameters:

port -

Throws:

ConfigurationException

IllegalArgumentException

getDefaultHighPort

int getDefaultHighPort()
                throws ConfigurationException

Returns the upper bound of the port range the SNMP agent uses for port binding when a node has not been explicitly configured to use a particular port.

Throws:

ConfigurationException

getNotificationTargets

String[] getNotificationTargets()
                         throws ConfigurationException

Returns an array containing currently configured notification targets.

Throws:

ConfigurationException

addNotificationTarget

void addNotificationTarget(String version,
                           String address)
                    throws ConfigurationException,
                           IllegalArgumentException

Adds a notification target.

Parameters:

version - May be v2c | v3

address - Must be in the form udp:address/port

Throws:

ConfigurationException

IllegalArgumentException

removeNotificationTarget

void removeNotificationTarget(String target)
                       throws ConfigurationException,
                              IllegalArgumentException

Removes a notification target. Valid arguments can be determined by calling the getNotificationTargets() method.

Parameters:

target -

Throws:

ConfigurationException

IllegalArgumentException

setNotificationsEnabled

void setNotificationsEnabled(boolean enabled)
                      throws ConfigurationException,
                             IllegalStateException

Sets whether notifications are delivered by the SNMP agent.

Parameters:

enabled -

Throws:

ConfigurationException

IllegalStateException

isNotificationsEnabled

boolean isNotificationsEnabled()
                        throws ConfigurationException

Returns true if the Rhino SNMP agent is configured to send SNMP notifications.

Throws:

ConfigurationException - if the SNMP configuration could not be read.

setLoopbackAddressesAllowed

void setLoopbackAddressesAllowed(boolean allowed)
                          throws ConfigurationException

Sets whether loopback addresses (e.g. 127.0.0.1) will be considered when the SNMP agent looks for local interfaces to bind to. If there are only loopback addresses available, this setting will be ignored.

Parameters:

allowed -

Throws:

ConfigurationException

isLoopbackAddressesAllowed

boolean isLoopbackAddressesAllowed()
                            throws ConfigurationException

Returns whether loopback addresses (e.g. 127.0.0.1) will be considered when the SNMP agent looks for local interfaces to bind to. If there are only loopback addresses available, this setting will be ignored.

Throws:

ConfigurationException

setAddressBindingsSaved

void setAddressBindingsSaved(boolean saved)
                      throws ConfigurationException

Sets whether the initial address bindings are preserved over node restart.

Parameters:

saved -

Throws:

ConfigurationException

isAddressBindingsSaved

boolean isAddressBindingsSaved()
                        throws ConfigurationException

Returns whether the initial address bindings are preserved over node restart.

Throws:

ConfigurationException

setPortBindingsSaved

void setPortBindingsSaved(boolean saved)
                   throws ConfigurationException

Sets whether the initial port bindings are preserved over node restart.

Parameters:

saved -

Throws:

ConfigurationException

isPortBindingsSaved

boolean isPortBindingsSaved()
                     throws ConfigurationException

Returns whether the initial port bindings are preserved over node restart.

Throws:

ConfigurationException

setDetails

void setDetails(String name,
                String description,
                String contact,
                String location)
         throws ConfigurationException

Sets the name, description, contact, and location strings for the SNMP agent. These correspond to the SNMPv2-MIB sysName, sysDescr, sysContact, and sysLocation fields. If necessary, system properties can be used in these strings in the form ${property.name} to provide node specific information. The special ${node-id} property reference is also available.

Parameters:

name -

description -

contact -

location -

Throws:

ConfigurationException

setLocation

void setLocation(String location)
          throws ConfigurationException

Sets the location string for the SNMP agent. This correspond to the SNMPv2-MIB sysLocation field. If necessary, system properties can be used in this string in the form ${property.name} to provide node specific information. The special ${node-id} property reference is also available.

Throws:

ConfigurationException

getLocation

String getLocation()
            throws ConfigurationException

Returns the SNMPv2-MIB sysLocation field value.

Throws:

ConfigurationException

setDescription

void setDescription(String description)
             throws ConfigurationException

Sets the description string for the SNMP agent. This correspond to the SNMPv2-MIB sysDescr field. If necessary, system properties can be used in this string in the form ${property.name} to provide node specific information. The special ${node-id} property reference is also available.

Throws:

ConfigurationException

getDescription

String getDescription()
               throws ConfigurationException

Returns the SNMPv2-MIB sysDescr field value.

Throws:

ConfigurationException

setContact

void setContact(String contact)
         throws ConfigurationException

Sets the contact string for the SNMP agent. This correspond to the SNMPv2-MIB sysContact field. If necessary, system properties can be used in this string in the form ${property.name} to provide node specific information. The special ${node-id} property reference is also available.

Throws:

ConfigurationException

getContact

String getContact()
           throws ConfigurationException

Returns the SNMPv2-MIB sysContact field value.

Throws:

ConfigurationException

setName

void setName(String name)
      throws ConfigurationException

Sets the name string for the SNMP agent. This correspond to the SNMPv2-MIB sysName field. If necessary, system properties can be used in this string in the form ${property.name} to provide node specific information. The special ${node-id} property reference is also available.

Throws:

ConfigurationException

getName

String getName()
        throws ConfigurationException

Returns the SNMPv2-MIB sysName field value.

Throws:

ConfigurationException

getNodeConfigIDs

short[] getNodeConfigIDs()
                  throws ConfigurationException

Returns a list of all nodes which have saved SNMP data.

Throws:

ConfigurationException

clearNodeConfigs

void clearNodeConfigs()
               throws ConfigurationException

Clears saved SNMP address/port bindings for all nodes (including nodes which are not currently part of the cluster).

Throws:

ConfigurationException

clearNodeConfigs

void clearNodeConfigs(short[] nodes)
               throws ConfigurationException,
                      IllegalArgumentException

Clears saved SNMP address/port bindings for the specified nodes.

Throws:

ConfigurationException

IllegalArgumentException

getNodeConfigs

TabularData getNodeConfigs()

Returns the current saved state of the SNMP agent for each Rhino node. The data returned is TabularData with the columns "node" (Integer), "port" (Integer), "addresses" (ArrayType).

node	The node id for which this data is relevant.
port	The port used for the node.
addresses	An ArrayType of Strings representing the list of saved addresses for this node.

getSNMPNodeMBean

ObjectName getSNMPNodeMBean(short nodeID)
                     throws ConfigurationException,
                            IllegalArgumentException

Returns the ObjectName of the JMX object providing the SNMPNodeMBean management interface for the specified node.

Throws:

ConfigurationException

IllegalArgumentException

getMIBs

TabularData getMIBs()

Returns MIB definitions for all parameter set types and notification types that currently exist. This data is returned as TabularData with columns "is-aggregate" (Boolean), "namespace" (String), "parameter-set-type" (String), "filename" (String), and "mib-content" (String).

is-aggregate	Boolean flag indicating if the row is an aggregate MIB.
namespace	The namespace of the parameter set type. 'Null' if the parameter set type is defined in the global environment or if this mib contains Rhino’s SNMP notifications.
parameter-set-type	The name of the parameter set type, or 'null' if this mib contains Rhino’s SNMP notifications.
filename	The suggested filename for the exported MIB.
mib-content	A text string containing the contents of the MIB.

getAgentState

TabularData getAgentState()

Returns the current active state of the SNMP agent on each Rhino node. The data returned is TabularData with the columns "node" (Integer), "running" (Boolean) and "addresses" (Tabular).

node	The node id for which this data is relevant.
running	Is true if the SNMP agent is running on the specified Rhino node.
addresses	A tabular type representing the list of bound addresses for this node. Contains the fields 'host' (String) and 'port' (Integer).

getOIDMappings

@Deprecated
TabularData getOIDMappings()
                    throws ConfigurationException

Deprecated.

Use SNMPParameterSetTypeManagementMBean.getAllOIDMappings() instead.

Returns the current active parameter set type → OID mappings. The data returned is TabularData with the columns "oid" (String) and "type-name" (String). oid The oid the parameter set type is mapped to. type-name The name of the parameter set type for which this data is relevant. in-use A flag indicating whether this configuration is actively being use.

Throws:

ConfigurationException

setOIDMapping

@Deprecated
void setOIDMapping(String parameterSetTypeName,
                   String OID)
            throws ConfigurationException,
                   IllegalArgumentException

Deprecated.

Use SNMPParameterSetTypeMBean.setOIDMapping(String) instead.

Maps the parameter set type to the specified OID.

Throws:

ConfigurationException

IllegalArgumentException

clearOIDMapping

@Deprecated
void clearOIDMapping(String parameterSetTypeName)
              throws ConfigurationException,
                     IllegalArgumentException

Deprecated.

Use SNMPParameterSetTypeMBean.clearOIDMapping() instead.

Clears the OID mapping for the specified parameter set type.

Throws:

ConfigurationException

IllegalArgumentException

getOIDMapping

@Deprecated
String getOIDMapping(String parameterSetTypeName)
              throws ConfigurationException,
                     IllegalArgumentException

Deprecated.

Use SNMPParameterSetTypeMBean.getOIDMapping() instead.

Returns the OID which the specified Parameter Set Type name is mapped to.

Throws:

ConfigurationException

IllegalArgumentException

getCounterMappings

@Deprecated
TabularData getCounterMappings()
                        throws ConfigurationException

Deprecated.

Use SNMPParameterSetTypeManagementMBean.getAllCounterMappings() instead.

Gets the current active counter mappings. The data returned is TabularData with the columns "type-name" (String), "counter-name" (String) and "mapping" (Integer).

type-name	The name of the parameter set type for which this data is relevant.
counter-name	The name of the counter for which this data is relevant.
mapping	The last digit of the OID this type and counter are mapped to.

Throws:

ConfigurationException

setCounterMapping

@Deprecated
void setCounterMapping(String parameterSetTypeName,
                       String counterName,
                       int index)
                throws ConfigurationException,
                       IllegalArgumentException

Deprecated.

Use SNMPParameterSetTypeMBean.setCounterMapping(String, int) instead.

Maps the specified parameter set type name and counter name to the specified value.

Throws:

ConfigurationException

IllegalArgumentException

clearCounterMapping

@Deprecated
void clearCounterMapping(String parameterSetTypeName,
                         String counterName)
                  throws ConfigurationException,
                         IllegalArgumentException

Deprecated.

Use SNMPParameterSetTypeMBean.clearCounterMapping(String) instead.

Clears the counter mapping for the specified parameter set type and counter name.

Throws:

ConfigurationException

IllegalArgumentException

getCounterMapping

@Deprecated
int getCounterMapping(String parameterSetTypeName,
                      String counterName)
               throws ConfigurationException,
                      IllegalArgumentException

Deprecated.

Use SNMPParameterSetTypeMBean.getCounterMapping(String) instead.

Returns the value to which the specified counter from the named parameter set type is mapped to.

Throws:

ConfigurationException

IllegalArgumentException

getNotificationTypeNames

String[] getNotificationTypeNames()
                           throws ConfigurationException

Returns an array of strings containing the type names which can be used with setNotificationFilter and getNotificationFilter.

Throws:

ConfigurationException

setNotificationConfig

void setNotificationConfig(String type,
                           boolean enabled)
                    throws ConfigurationException,
                           IllegalArgumentException

Sets whether SNMP notifications will be sent for the specified notification type. Valid type names can be determined via getSNMPNotificationTypeNames().

Throws:

IllegalArgumentException - if an invalid type name is specfified.

ConfigurationException

getNotificationConfig

boolean getNotificationConfig(String type)
                       throws ConfigurationException,
                              IllegalArgumentException

Returns true if an SNMP notification will be sent for the specified notification type. Valid type names can be determined via getSNMPNotificationTypeNames().

Throws:

IllegalArgumentException - if an invalid type name is specfified.

ConfigurationException

getNotificationConfigs

TabularData getNotificationConfigs()
                            throws ConfigurationException

Returns the current notification configs as TabularData. The return TabularData has columns "type" (String) and "enabled" (Boolean). type The type of the notification configuration. enabled Whether the notification type will be delivered (true) via SNMP or not (false).

Throws:

ConfigurationException

setProtocolVersionsEnabled

void setProtocolVersionsEnabled(String[] versions,
                                boolean enabled)
                         throws ConfigurationException,
                                IllegalArgumentException

Enables or disables the specified SNMP protocol versions. The 'version' argument may be 'v1', 'v2c', or 'v3'.

Throws:

ConfigurationException

IllegalArgumentException

getEnabledProtocolVersions

String[] getEnabledProtocolVersions()
                             throws ConfigurationException

Returns a string array containing the currently enabled SNMP protocol versions. This array can contain the values 'v1', 'v2c', and 'v3'.

Throws:

ConfigurationException

setCommunity

void setCommunity(String communityName)
           throws ConfigurationException

Sets the SNMP community name.

Throws:

ConfigurationException

getCommunity

String getCommunity()
             throws ConfigurationException

Returns the SNMP community name.

Throws:

ConfigurationException

setv3Username

void setv3Username(String username)
            throws ConfigurationException

Sets the SNMP v3 username.

Throws:

ConfigurationException

getv3Username

String getv3Username()
              throws ConfigurationException

Returns the SNMP v3 username.

Throws:

ConfigurationException

setv3AuthenticationDetails

void setv3AuthenticationDetails(String protocol,
                                String key)
                         throws ConfigurationException,
                                IllegalArgumentException

Sets the SNMP v3 authentication protocol.

Throws:

ConfigurationException

IllegalArgumentException

getv3AuthenticationProtocol

String getv3AuthenticationProtocol()
                            throws ConfigurationException

Returns the SNMP v3 authentication protocol.

Throws:

ConfigurationException

getv3AuthenticationProtocols

String[] getv3AuthenticationProtocols()
                               throws ConfigurationException

Returns the valid SNMP v3 authentication protocols.

Throws:

ConfigurationException

setv3PrivacyDetails

void setv3PrivacyDetails(String protocol,
                         String key)
                  throws ConfigurationException,
                         IllegalArgumentException

Sets the SNMP v3 privacy protocol.

Throws:

ConfigurationException

IllegalArgumentException

getv3PrivacyProtocol

String getv3PrivacyProtocol()
                     throws ConfigurationException

Returns the SNMP v3 privacy protocol.

Throws:

ConfigurationException

getv3PrivacyProtocols

String[] getv3PrivacyProtocols()
                        throws ConfigurationException

Returns the valid SNMP v3 privacy protocols.

Throws:

ConfigurationException

setv3AuthenticationKey

void setv3AuthenticationKey(String value)
                     throws ConfigurationException

Sets the SNMP v3 authentication key.

Throws:

ConfigurationException

getv3AuthenticationKey

String getv3AuthenticationKey()
                       throws ConfigurationException

Returns the SNMP v3 authentication key.

Throws:

ConfigurationException

setv3PrivacyKey

void setv3PrivacyKey(String value)
              throws ConfigurationException

Sets the SNMP v3 privacy key.

Throws:

ConfigurationException

getv3PrivacyKey

String getv3PrivacyKey()
                throws ConfigurationException

Returns the SNMP v3 privacy key.

Throws:

ConfigurationException

getEngineBoots

int getEngineBoots()
            throws ConfigurationException

Returns the V3 EngineBoots count.

Throws:

ConfigurationException

getEngineTime

int getEngineTime()
           throws ConfigurationException

Returns the V3 EngineTime.

Throws:

ConfigurationException

setv3UserDetails

void setv3UserDetails(String name,
                      String authenticationProtocol,
                      String authenticationKey,
                      String privacyProtocol,
                      String privacyKey)
               throws ConfigurationException,
                      IllegalArgumentException

Sets the SNMP v3 user details.

Throws:

ConfigurationException

IllegalArgumentException

getEngineIDs

Map<Integer,String> getEngineIDs()
                                throws ConfigurationException

Returns a map of node IDs to local engine IDs.

Throws:

ConfigurationException

setUserEngineID

void setUserEngineID(String octetString)
              throws ConfigurationException

Sets the user specifiable portion of the EngineID used on each node. The argument should be 6 octets in length in the form: 12:34:56:78:9a:bc. The final engine ID is determined by the OpenCloud enterprise ID (first 4 octets), the current node ID (2 octets), and then the 6 octets specified by this method. The default value of the user portion of the EngineID is 00:00:00:00:00:00.

Throws:

ConfigurationException

getUserEngineID

String getUserEngineID()
                throws ConfigurationException

Returns the user specified portion of the EngineID.

Throws:

ConfigurationException

setNotificationTarget

@Deprecated
void setNotificationTarget(String address,
                           int port)
                    throws ConfigurationException,
                           IllegalArgumentException

Deprecated.

Throws:

ConfigurationException

IllegalArgumentException

setNotificationAddress

@Deprecated
void setNotificationAddress(String address)
                     throws ConfigurationException,
                            IllegalArgumentException

Deprecated.

Throws:

ConfigurationException

IllegalArgumentException

getNotificationAddress

@Deprecated
String getNotificationAddress()
                       throws ConfigurationException

Deprecated.

Throws:

ConfigurationException

setNotificationPort

@Deprecated
void setNotificationPort(int port)
                  throws ConfigurationException,
                         IllegalArgumentException

Deprecated.

Throws:

ConfigurationException

IllegalArgumentException

getNotificationPort

@Deprecated
int getNotificationPort()
                 throws ConfigurationException

Deprecated.

Throws:

ConfigurationException