OCSS7 Compliance Matrix

This document describes OCSS7’s compliance to the relevent International Telecommunications Union (ITU) standards. The standards are available on the ITU website.

Other documentation for OCSS7 can be found on the OCSS7 product page.

ATIS-1000112.1-2005

Previously known as ANSI T1.112.

ATIS-1000112.1 - Functional Description

Empty cells are descriptive text only

	Description	Compliance	Notes
1	Scope and field of application
2	Services provided by the SCCP	Partial	Class 2 and class 3 services are not implemented.
2.1	Connection-Oriented Services	None	Connection-oriented services are not supported.
2.1.1	Temporary Signaling Connections	None	See 2.1
2.1.1.1	Description	None	See 2.1
2.1.1.1.1	Connection Establishment Phase	None	See 2.1
2.1.1.1.2	Data Transfer Phase	None	See 2.1
2.1.1.1.3	Connection Release Phase	None	See 2.1
2.1.1.2	Network Service Primitives and Parameters	None	See 2.1
2.1.1.2.1	Overview	None	See 2.1
2.1.1.2.2	Connection Establishment Phase	None	See 2.1
2.1.1.2.3	Data Transfer Phase	None	See 2.1
2.1.1.2.4	Release Phase	None	See 2.1
2.1.1.2.5	Notice Service	None	See 2.1
2.1.1.3	Additional SCCP primitive and interface elements	None	See 2.1
2.1.1.3.1	Overview	None	See 2.1
2.1.1.3.2	Connection establishment interface elements	None	See 2.1
2.1.2	Permanent Signaling Connections	None	See 2.1
2.1.2.1	Description	None	See 2.1
2.1.2.2	Primitives and Parameters	None	See 2.1
2.2	Connectionless Service	Full
2.2.1	Description	Full
2.2.2	Primitives and Parameters of the Connectionless Service	Full
2.2.2.1	Overview	Full
2.2.2.2	Parameters
2.2.2.2.1	Address	Full
2.2.2.2.2	Quality of service parameter set	Full
2.2.2.2.3	Reason for Return	Full
2.2.2.2.4	User Data	Full
2.2.2.3	Primitives
2.2.2.3.1	N-UNITDATA	Full
2.2.2.3.2	N-NOTICE	Full
2.3	SCCP Management
2.3.1	Description	Full
2.3.2	Primitives and Parameters of the SCCP Management
2.3.2.1	Overview	Partial	N-COORD and N-TRAFFIC not supported
2.3.2.2	Parameters
2.3.2.2.1	Address	Full
2.3.2.2.2	Affected User	Full
2.3.2.2.3	User Status	None	Parameter ignored
2.3.2.2.3A	Traffic Mix	None	Parameter ignored
2.3.2.2.4	Subsystem Multiplicity Indicator	None	Parameter ignored
2.3.2.2.5	Affected DPC	Full
2.3.2.2.6	Signaling Point Status	Full
2.3.2.2.7	Confirm Status	None	Parameter ignored
2.3.2.3	Primitives
2.3.2.3.1	N-COORD	None	Not supported
2.3.2.3.2	N-STATE	Full
2.3.2.3.3	N-TRAFFIC	None	Not supported
2.3.2.3.4	N-PCSTATE	Full
3	Services Assumed from the MTP	Full
3.1	Description	Full
3.2	Primitives and Parameters	Full
3.2.1	MTP-TRANSFER	Full
3.2.2	MTP-PAUSE	Full
3.2.3	MTP-RESUME	Full
3.2.4	MTP-STATUS	Full
4	Functions Provided by the SCCP	Full
4.1	Connection-Oriented Functions	None	Connection-oriented functions are not implemented. See also 2.1
4.1.1	Functions for Temporary Signaling Connections
4.1.1.1	Connection Establishment Functions	None	Not compliant - see 4.1
4.1.1.2	Data Transfer Phase Functions	None	Not compliant - see 4.1
4.1.1.3	Release Phase Functions	None	Not compliant - see 4.1
4.1.2	Functions for Permanent Signaling Connections
4.1.2.1	Connection Establishment Phase and Connection Release Phase Functions	None	Not compliant - see 4.1
4.1.2.2	Data Transfer Phase Functions	None	Not compliant - see 4.1
4.2	Connectionless Service Functions	Full

Description

Compliance

Notes

Scope and field of application

Services provided by the SCCP

Partial

Class 2 and class 3 services are not implemented.

2.1

Connection-Oriented Services

None

Connection-oriented services are not supported.

2.1.1

Temporary Signaling Connections

None

See 2.1

2.1.1.1

Description

None

See 2.1

2.1.1.1.1

Connection Establishment Phase

None

See 2.1

2.1.1.1.2

Data Transfer Phase

None

See 2.1

2.1.1.1.3

Connection Release Phase

None

See 2.1

2.1.1.2

Network Service Primitives and Parameters

None

See 2.1

2.1.1.2.1

Overview

None

See 2.1

2.1.1.2.2

Connection Establishment Phase

None

See 2.1

2.1.1.2.3

Data Transfer Phase

None

See 2.1

2.1.1.2.4

Release Phase

None

See 2.1

2.1.1.2.5

Notice Service

None

See 2.1

2.1.1.3

Additional SCCP primitive and interface elements

None

See 2.1

2.1.1.3.1

Overview

None

See 2.1

2.1.1.3.2

Connection establishment interface elements

None

See 2.1

2.1.2

Permanent Signaling Connections

None

See 2.1

2.1.2.1

Description

None

See 2.1

2.1.2.2

Primitives and Parameters

None

See 2.1

2.2

Connectionless Service

Full

2.2.1

Description

Full

2.2.2

Primitives and Parameters of the Connectionless Service

Full

2.2.2.1

Overview

Full

2.2.2.2

Parameters

2.2.2.2.1

Address

Full

2.2.2.2.2

Quality of service parameter set

Full

2.2.2.2.3

Reason for Return

Full

2.2.2.2.4

User Data

Full

2.2.2.3

Primitives

2.2.2.3.1

N-UNITDATA

Full

2.2.2.3.2

N-NOTICE

Full

2.3

SCCP Management

2.3.1

Description

Full

2.3.2

Primitives and Parameters of the SCCP Management

2.3.2.1

Overview

Partial

N-COORD and N-TRAFFIC not supported

2.3.2.2

Parameters

2.3.2.2.1

Address

Full

2.3.2.2.2

Affected User

Full

2.3.2.2.3

User Status

None

Parameter ignored

2.3.2.2.3A

Traffic Mix

None

Parameter ignored

2.3.2.2.4

Subsystem Multiplicity Indicator

None

Parameter ignored

2.3.2.2.5

Affected DPC

Full

2.3.2.2.6

Signaling Point Status

Full

2.3.2.2.7

Confirm Status

None

Parameter ignored

2.3.2.3

Primitives

2.3.2.3.1

N-COORD

None

Not supported

2.3.2.3.2

N-STATE

Full

2.3.2.3.3

N-TRAFFIC

None

Not supported

2.3.2.3.4

N-PCSTATE

Full

Services Assumed from the MTP

Full

3.1

Description

Full

3.2

Primitives and Parameters

Full

3.2.1

MTP-TRANSFER

Full

3.2.2

MTP-PAUSE

Full

3.2.3

MTP-RESUME

Full

3.2.4

MTP-STATUS

Full

Functions Provided by the SCCP

Full

4.1

Connection-Oriented Functions

None

Connection-oriented functions are not implemented. See also 2.1

4.1.1

Functions for Temporary Signaling Connections

4.1.1.1

Connection Establishment Functions

None

Not compliant - see 4.1

4.1.1.2

Data Transfer Phase Functions

None

Not compliant - see 4.1

4.1.1.3

Release Phase Functions

None

Not compliant - see 4.1

4.1.2

Functions for Permanent Signaling Connections

4.1.2.1

Connection Establishment Phase and Connection Release Phase Functions

None

Not compliant - see 4.1

4.1.2.2

Data Transfer Phase Functions

None

Not compliant - see 4.1

4.2

Connectionless Service Functions

Full

ATIS-1000112.2 - Definitions and Functions

Empty cells are descriptive text only

	Description	Compliance	Notes
1	Scope, Purpose and Application
2	Signaling Connection Control Part Message	Partial	Connection-oriented service messages are not supported.
2.1	Connection Confirm	None	Not compliant - see 2
2.2	Connection Request	None	Not compliant - see 2
2.3	Connection Refused	None	Not compliant - see 2
2.4	Data Acknowledgement	None	Not compliant - see 2
2.5	Data Form 1	None	Not compliant - see 2
2.6	Data Form 1	None	Not compliant - see 2
2.7	Expedited Data	None	Not compliant - see 2
2.8	Expedited Data Acknowledgement	None	Not compliant - see 2
2.9	Inactivity Test	None	Not compliant - see 2
2.10	Protocol Data Unit Error	None	Not compliant - see 2
2.11	Released	None	Not compliant - see 2
2.12	Release Complete	None	Not compliant - see 2
2.13	Reset Confirmation	None	Not compliant - see 2
2.14	Reset Request	None	Not compliant - see 2
2.15	Unitdata	Full
2.15A	Extended Unitdata	Full
2.15B	Long UnitData	Partial	Sending of LUDT is not implemented
2.16	Unitdata Service	Full
2.16A	Extended Unitdata Service	Full
2.16B	Long UnitData Service	Full
3	Messages for SCCP Subsystem Management	Partial	Subsystem-out-of-service-request, Subsystem-out-of-service-grant, system-backup-routing and system-normal-routing messages are not supported.
3.1	Subsystem Allowed	Full
3.2	Subsystem Prohibited	Full
3.3	Subsystem Status Test	Full
3.4	Subsystem Out Of Service Request	None	Message not supported
3.5	Subsystem Out Of Service Grant	None	Message not supported
3.6	Subsystem Backup Routing	None	Message not supported
3.7	Subsystem Normal Routing	None	Message not supported
3.8	Subsystem Routing Status Test	None	Message not supported
4	SCCP Parameters
4.1	Calling/Called Party Address	Full
4.2	Credit	None	Parameter not supported
4.3	Data	Full
4.4	Diagnostic	None	Parameter not supported
4.5	End of optional parameters	Partial	Only XUDT supports encoding this parameter.
4.6	Error cause	None	Not compliant - see 2
4.7	Local reference number (source/destination)	None	Parameter not supported.
4.8	Message type code	Full
4.9	Protocol class	Full
4.10	Receive sequence number	None	Not compliant - see 2
4.11	Refusal cause	None	Not compliant - see 2
4.12	Release cause	None	Not compliant - see 2
4.13	Reset cause	None	Not compliant - see 2
4.14	Return cause	None	Not compliant - see 2
4.15	Segmenting/reassembling	None	Not compliant - see 2
4.16	Segquencing/segmenting	None	Not compliant - see 2
4.17	SCCP hop counter	Partial	Parameter value is ignored
4.18	Segmentation	Full
4.19	Intermediate Signaling Network Identification	Partial	Parameter value is ignored
4.20	Long Data	Partial	Encoding is not implemented
4.21	Intermediate Network Selection	Partial	Parameter value is ignored
4.22	Message Type Interworking	Partial	Parameter value is ignored
5	Parameters For SCCP Subsystem Management	Full
5.1	Affected Subsystem Number	Full
5.2	Affected Point Code	Full
5.3	Subsystem Multiplicity Indicator	Full
6	Inclusion of Fields in the Messages	Full

Description

Compliance

Notes

Scope, Purpose and Application

Signaling Connection Control Part Message

Partial

Connection-oriented service messages are not supported.

2.1

Connection Confirm

None

Not compliant - see 2

2.2

Connection Request

None

Not compliant - see 2

2.3

Connection Refused

None

Not compliant - see 2

2.4

Data Acknowledgement

None

Not compliant - see 2

2.5

Data Form 1

None

Not compliant - see 2

2.6

Data Form 1

None

Not compliant - see 2

2.7

Expedited Data

None

Not compliant - see 2

2.8

Expedited Data Acknowledgement

None

Not compliant - see 2

2.9

Inactivity Test

None

Not compliant - see 2

2.10

Protocol Data Unit Error

None

Not compliant - see 2

2.11

Released

None

Not compliant - see 2

2.12

Release Complete

None

Not compliant - see 2

2.13

Reset Confirmation

None

Not compliant - see 2

2.14

Reset Request

None

Not compliant - see 2

2.15

Unitdata

Full

2.15A

Extended Unitdata

Full

2.15B

Long UnitData

Partial

Sending of LUDT is not implemented

2.16

Unitdata Service

Full

2.16A

Extended Unitdata Service

Full

2.16B

Long UnitData Service

Full

Messages for SCCP Subsystem Management

Partial

Subsystem-out-of-service-request, Subsystem-out-of-service-grant, system-backup-routing and system-normal-routing messages are not supported.

3.1

Subsystem Allowed

Full

3.2

Subsystem Prohibited

Full

3.3

Subsystem Status Test

Full

3.4

Subsystem Out Of Service Request

None

Message not supported

3.5

Subsystem Out Of Service Grant

None

Message not supported

3.6

Subsystem Backup Routing

None

Message not supported

3.7

Subsystem Normal Routing

None

Message not supported

3.8

Subsystem Routing Status Test

None

Message not supported

SCCP Parameters

4.1

Calling/Called Party Address

Full

4.2

Credit

None

Parameter not supported

4.3

Data

Full

4.4

Diagnostic

None

Parameter not supported

4.5

End of optional parameters

Partial

Only XUDT supports encoding this parameter.

4.6

Error cause

None

Not compliant - see 2

4.7

Local reference number (source/destination)

None

Parameter not supported.

4.8

Message type code

Full

4.9

Protocol class

Full

4.10

Receive sequence number

None

Not compliant - see 2

4.11

Refusal cause

None

Not compliant - see 2

4.12

Release cause

None

Not compliant - see 2

4.13

Reset cause

None

Not compliant - see 2

4.14

Return cause

None

Not compliant - see 2

4.15

Segmenting/reassembling

None

Not compliant - see 2

4.16

Segquencing/segmenting

None

Not compliant - see 2

4.17

SCCP hop counter

Partial

Parameter value is ignored

4.18

Segmentation

Full

4.19

Intermediate Signaling Network Identification

Partial

Parameter value is ignored

4.20

Long Data

Partial

Encoding is not implemented

4.21

Intermediate Network Selection

Partial

Parameter value is ignored

4.22

Message Type Interworking

Partial

Parameter value is ignored

Parameters For SCCP Subsystem Management

Full

5.1

Affected Subsystem Number

Full

5.2

Affected Point Code

Full

5.3

Subsystem Multiplicity Indicator

Full

Inclusion of Fields in the Messages

Full

ATIS-1000112.3 - Formats and Codes

Empty cells are descriptive text only

	Description	Compliance	Notes
1	Scope, Purpose and Applications
1.1	Routing label	Full
1.2	Message type code	Full
1.3	Formatting principles	Full
1.4	Mandatory fixed part	Full
1.5	Mandatory variable part	Full
1.6	Optional part	Full
1.7	End of optional parameters octet	Full
1.8	Order of transmission	Full
1.9	Coding of spare bits	Full
1.10	National message types and parameters	Full
2	Coding of the general parts
2.1	Coding of the message type	Partial	Class 3 and class 4 messages are not supported.
2.2	Coding of the length indicator	Full
2.3	Coding of the pointers	Full
3	SCCP Parameters	Partial	Only the parameters related to messages of class 0 and class 1 are supported.
3.1	End of optional parameters	Full
3.2	Destination local reference	None	Not compliant - see 3
3.3	Source local reference	None	Not compliant - see 3
3.4	Called party address	Full
3.4.1	Address indicator	Full
3.4.2	Address	Full
3.4.2.1	Subsytem number	Full
3.4.2.2	Signaling point code	Full
3.4.2.3	Global title	Full
3.4.2.3.1	Global Title Indicator = 0001	Full
3.4.2.3.2	Global Title Indicator = 0010	Full
3.5	Calling party address	Full
3.6	Protocol class	Full
3.7	Segmenting/reassembling	None	Not compliant - see 3
3.8	Receive sequence number	None	Not compliant - see 3
3.9	Sequencing/segmenting	None	Not compliant - see 3
3.10	Credit	None	Not compliant - see 3
3.11	Release cause	None	Not compliant - see 3
3.12	Return cause	None	Not compliant - see 3
3.13	Reset cause	None	Not compliant - see 3
3.14	Error cause	None	Not compliant - see 3
3.15	Refusal cause	None	Not compliant - see 3
3.16	Data	None	Not compliant - see 3
3.17	SCCP Hop Counter	Full
3.18	Segmentation	Full
3.19	Intermediate Signaling Network Identification	Partial	Encoding is not implemented
3.20	Long Data	Partial	Encoding is not implemented
3.21	Intermediate Network Selection	Partial	Encoding is not implemented
3.22	Message Type Interworking	Partial	Encoding is not implemented
4	SCCP Messages and Codes
4.1	General
4.2	Connection Request	None	Not compliant - see 3
4.3	Connection Confirm	None	Not compliant - see 3
4.4	Connection Refused	None	Not compliant - see 3
4.5	Released	None	Not compliant - see 3
4.6	Release Complete	None	Not compliant - see 3
4.7	Data Form 1	None	Not compliant - see 3
4.8	Data Form 2	None	Not compliant - see 3
4.9	Data Acknowledgement	None	Not compliant - see 3
4.10	Unitdata	Full
4.10A	Extended Unitdata	Full
4.10B	Long Uditdata	Partial	Encoding is not implemented
4.11	Unitdata Service	Full
4.11A	Extended Unitdata Service	Full
4.11B	Long Unitdata Service	Partial	Encoding is not implemented
4.12	Expedited Data	None	Not compliant - see 3
4.13	Expedited Data Acknowledgement	None	Not compliant - see 3
4.14	Reset Request	None	Not compliant - see 3
4.15	Reset Confirmation	None	Not compliant - see 3
4.16	Protocol Data Unit Error	None	Not compliant - see 3
4.17	Inactivity Test	None	Not compliant - see 3
5	SCCP Management Messages and Codes
5.1	General	Full
5.1.1	SCMG format identifier	Full
5.2	SCMG Message Parameters
5.2.1	End of Optional Parameters
5.2.2	Affected SSN	Full
5.2.3	Affected PC	Full
5.2.4	Subsystem multiplicity indicator	Partial	Encoding is not implemented.
5.3	SCMG Messages	Full
A.1	Introduction		Whilst normative, this is not applicable to the SCCP implementation
A.2	Assumptions
A.3	Definitions
A.4	Guidelines for Assigning Internetwork Translation Type Code Values
A.4.1	Constraints and Logistics
A.4.2	Determining Translation Type Needs
A.4.3	Determining the Application/Translation Group
A.5	Procedures for Requesting a Translation Type Code Assignment
A.5.1	Content of Proposal
A.5.2	Assignment of Translation Type Codes

Description

Compliance

Notes

Scope, Purpose and Applications

1.1

Routing label

Full

1.2

Message type code

Full

1.3

Formatting principles

Full

1.4

Mandatory fixed part

Full

1.5

Mandatory variable part

Full

1.6

Optional part

Full

1.7

End of optional parameters octet

Full

1.8

Order of transmission

Full

1.9

Coding of spare bits

Full

1.10

National message types and parameters

Full

Coding of the general parts

2.1

Coding of the message type

Partial

Class 3 and class 4 messages are not supported.

2.2

Coding of the length indicator

Full

2.3

Coding of the pointers

Full

SCCP Parameters

Partial

Only the parameters related to messages of class 0 and class 1 are supported.

3.1

End of optional parameters

Full

3.2

Destination local reference

None

Not compliant - see 3

3.3

Source local reference

None

Not compliant - see 3

3.4

Called party address

Full

3.4.1

Address indicator

Full

3.4.2

Address

Full

3.4.2.1

Subsytem number

Full

3.4.2.2

Signaling point code

Full

3.4.2.3

Global title

Full

3.4.2.3.1

Global Title Indicator = 0001

Full

3.4.2.3.2

Global Title Indicator = 0010

Full

3.5

Calling party address

Full

3.6

Protocol class

Full

3.7

Segmenting/reassembling

None

Not compliant - see 3

3.8

Receive sequence number

None

Not compliant - see 3

3.9

Sequencing/segmenting

None

Not compliant - see 3

3.10

Credit

None

Not compliant - see 3

3.11

Release cause

None

Not compliant - see 3

3.12

Return cause

None

Not compliant - see 3

3.13

Reset cause

None

Not compliant - see 3

3.14

Error cause

None

Not compliant - see 3

3.15

Refusal cause

None

Not compliant - see 3

3.16

Data

None

Not compliant - see 3

3.17

SCCP Hop Counter

Full

3.18

Segmentation

Full

3.19

Intermediate Signaling Network Identification

Partial

Encoding is not implemented

3.20

Long Data

Partial

Encoding is not implemented

3.21

Intermediate Network Selection

Partial

Encoding is not implemented

3.22

Message Type Interworking

Partial

Encoding is not implemented

SCCP Messages and Codes

4.1

General

4.2

Connection Request

None

Not compliant - see 3

4.3

Connection Confirm

None

Not compliant - see 3

4.4

Connection Refused

None

Not compliant - see 3

4.5

Released

None

Not compliant - see 3

4.6

Release Complete

None

Not compliant - see 3

4.7

Data Form 1

None

Not compliant - see 3

4.8

Data Form 2

None

Not compliant - see 3

4.9

Data Acknowledgement

None

Not compliant - see 3

4.10

Unitdata

Full

4.10A

Extended Unitdata

Full

4.10B

Long Uditdata

Partial

Encoding is not implemented

4.11

Unitdata Service

Full

4.11A

Extended Unitdata Service

Full

4.11B

Long Unitdata Service

Partial

Encoding is not implemented

4.12

Expedited Data

None

Not compliant - see 3

4.13

Expedited Data Acknowledgement

None

Not compliant - see 3

4.14

Reset Request

None

Not compliant - see 3

4.15

Reset Confirmation

None

Not compliant - see 3

4.16

Protocol Data Unit Error

None

Not compliant - see 3

4.17

Inactivity Test

None

Not compliant - see 3

SCCP Management Messages and Codes

5.1

General

Full

5.1.1

SCMG format identifier

Full

5.2

SCMG Message Parameters

5.2.1

End of Optional Parameters

5.2.2

Affected SSN

Full

5.2.3

Affected PC

Full

5.2.4

Subsystem multiplicity indicator

Partial

Encoding is not implemented.

5.3

SCMG Messages

Full

A.1

Introduction

Whilst normative, this is not applicable to the SCCP implementation

A.2

Assumptions

A.3

Definitions

A.4

Guidelines for Assigning Internetwork Translation Type Code Values

A.4.1

Constraints and Logistics

A.4.2

Determining Translation Type Needs

A.4.3

Determining the Application/Translation Group

A.5

Procedures for Requesting a Translation Type Code Assignment

A.5.1

Content of Proposal

A.5.2

Assignment of Translation Type Codes

ATIS-1000112.4 - Procedures

Empty cells are descriptive text only

	Description	Compliance	Notes
1	Scope, Purpose and Application
1.1	General Characteristics of Signaling Connection Control Procedures
1.1.1	Purpose
1.1.2	Protocol Classes	Partial	Class 2 and class 3 are not supported
1.1.2.1	Protocol Class 0	Full
1.1.2.2	Protocol Class 1	Full
1.1.2.3	Protocol Class 2	None
1.1.2.4	Protocol Class 3	None
1.1.3	Signaling Connections	None	Connection-oriented protocol classes are not supported
1.1.4	Compatibility and Handling of Unrecognized Information
1.1.4.1	Rules for Forwards Compatibility	Full
1.1.4.2	Handling of Unrecognized Messages or Parameters	Full
1.1.4.3	Handling of Unsupported Optional Parameter Value	Full
1.1.4.4	Treatment of Spare Fields	Full
1.1.4.5	Handling of Gaps	Full
1.2	Overview of Procedures for Connection-Oriented Services
1.2.1	Connection Establishment	None	Connection-oriented services are not implemented
1.2.2	Data Transfer	None	Connection-oriented services are not implemented
1.2.3	Connection Release	None	Connection-oriented services are not implemented
1.3	Overview of Procedures for Connectionless Services
1.3.1	General	Partial	Acting as a relay node is not supported
1.4	Structure of the SCCP and Contents of Specification	Partial	Connection-oriented control is not implemented
2	Addressing and Routing
2.1	SCCP Addressing	Full
2.2	SCCP Routing Principles	Full
2.2.1	Receipt of SCCP Message Transferred by the MTP	Full
2.2.2	Messages from Connection-Oriented or Connectionless Control to SCCP Routing Control	Partial	Connection-oriented control is not implemented
2.2.2.1	DPC Present	Full
2.2.2.2	Translation Required	Full
2.3	SCCP Routing
2.3.1	Receipt of SCCP Message Transferred by the MTP	Partial	Connection-oriented services are not supported
2.3.2	Messages from Connectionless or Connection-Oriented Control to SCCP Routing Control	Partial	Connection-oriented control is not implemented
2.4	Routing Failures	Partial	Connection-oriented messages are not supported
2.5	Compatibility Test	Partial	Sending of LUDT messages is not supported
3	Connection-Oriented Procedures		Connection-oriented procedures are not supported
3.1	Connection Establishment
3.1.1	General	None	Not supported - see 3
3.1.2	Local Reference Numbers	None	Not supported - see 3
3.1.3	Negotiation Procedures
3.1.3.1	Protocol Class Negotiation	None	Not supported - see 3
3.1.3.2	Flow Control Credit Negotiation	None	Not supported - see 3
3.1.4	Actions at the Originating Node
3.1.4.1	Initial Actions	None	Not supported - see 3
3.1.4.2	Subsequent Actions	None	Not supported - see 3
3.1.5	Actions at a Relay Node with Coupling
3.1.5.1	Initial Action	None	Not supported - see 3
3.1.5.2	Subsequent Actions	None	Not supported - see 3
3.1.6	Actions at the Destination Node
3.1.6.1	Initial Actions	None	Not supported - see 3
3.1.6.2	Subsequent Actions	None	Not supported - see 3
3.2	Connection Refusal	None	Not supported - see 3
3.2.1	Actions at Node Initiating Connection Refusal	None	Not supported - see 3
3.2.1.1	Initiating Connection Refusal at the Destination Node	None	Not supported - see 3
3.2.1.2	Initiating Connection Refusal at a Relay Node	None	Not supported - see 3
3.2.1.3	Initiating Connection Refusal at the Originating Node	None	Not supported - see 3
3.2.2	Actions at a Relay Node Not Initiating Connection Refusal	None	Not supported - see 3
3.2.3	Actions at the Originating Node Not Initiating Connection Refusal	None	Not supported - see 3
3.3	Connection Release		Not supported - see 3
3.3.1	General	None	Not supported - see 3
3.3.2	Frozen Reference	None	Not supported - see 3
3.3.3	Actions at an End Node Initiating Connection Release		Not supported - see 3
3.3.3.1	Initial Actions	None	Not supported - see 3
3.3.3.2	Subsequent Actions	None	Not supported - see 3
3.3.4	Actions at a Relay Node	None	Not supported - see 3
3.3.4.1	Initial Actions	None	Not supported - see 3
3.3.4.2	Subsequent Actions	None	Not supported - see 3
3.3.5	Actions at an End Node Not Initiating Connection Release	None	Not supported - see 3
3.4	Inactivity Control	None	Not supported - see 3
3.5	Data Transfer		Not supported - see 3
3.5.1	General	None	Not supported - see 3
3.5.1.1	Actions at the Originating Node	None	Not supported - see 3
3.5.1.2	Actions at a Relay Node	None	Not supported - see 3
3.5.1.3	Actions at the Destination Node	None	Not supported - see 3
3.5.2	Flow Control		Not supported - see 3
3.5.2.1	General	None	Not supported - see 3
3.5.2.2	Sequence Numbering	None	Not supported - see 3
3.5.2.3	Flow Control Window	None	Not supported - see 3
3.5.2.4	Flow Control Procedures		Not supported - see 3
3.5.2.4.1	Transfer of DT 2 Messages	None	Not supported - see 3
3.5.2.4.2	Transfer of AK Messages	None	Not supported - see 3
3.5.2.4.3	Reception of a Data or AK Message	None	Not supported - see 3
3.5.3	Segmenting and Reassembly	None	Not supported - see 3
3.6	Expedited Data Transfer
3.6.1	General	None	Not supported - see 3
3.6.2	Actions at the Originating Node	None	Not supported - see 3
3.6.3	Actions at a Relay Node	None	Not supported - see 3
3.6.4	Actions at the Destination Node	None	Not supported - see 3
3.7	Reset
3.7.1	General	None	Not supported - see 3
3.7.2	Action at an End Node Initiating the Reset Procedure
3.7.2.1	Initial Actions	None	Not supported - see 3
3.7.2.2	Subsequent Actions	None	Not supported - see 3
3.7.3	Actions at a Relay Node
3.7.3.1	Initial Actions	None	Not supported - see 3
3.7.3.2	Subsequent Actions	None	Not supported - see 3
3.8	Restart
3.8.1	General	None	Not supported - see 3
3.8.2	Actions at the Recovered Node
3.8.2.1	Initial Actions	None	Not supported - see 3
3.8.2.2	Subsequent Actions	None	Not supported - see 3
3.9	Permanent Signaling Connections	None	Not supported - see 3
3.10	Abnormalities
3.10.1	General	None	Not supported - see 3
3.10.2	Syntax Error	None	Not supported - see 3
3.10.3	Action Tables	None	Not supported - see 3
3.10.4	Action Upon the Reception of an ERR Message	None	Not supported - see 3
4	Connectionless Procedures	Full	Relax usage of LUDT/LUDTS messages
4.1	Data Transfer	Partial	Only UDT, UDTS, XUDT and XUDTS messages are sent
4.1.1	Segmentation/Reassembly
4.1.1.1	Segmentation
4.1.1.1.1	General	Partial	LUDT is not supported
4.1.1.1.2	Normal Procedures	Partial	LUDT is not supported
4.1.1.1.3	Return on Error Procedures	Partial	LUDT and LUDTS are not supported
4.1.1.2	Reassembly
4.1.1.2.1	General	Partial	LUDT is not supported
4.1.1.2.2	Normal Procedures	Partial	LUDT is not supported
4.1.1.2.3	Return on Error Procedures	Full	LUDT and LUDTS are not supported
4.1.2	Message Change	None
4.1.2.1	UDT(S)/XUDT(S) Change Procedures	None	Message change is not supported
4.1.2.1.1	SCCP Relay Node
4.1.2.1.1.1	UDT(S) to XUDT(S) Message Change	None	Relay Node operation is not supported
4.1.2.1.1.2	XUDT(S) to UDT(S) Mesasge Change	None	Relay Node operation is not supported
4.1.2.1.2	XUDT(S) capable end node	None	Message change is not supported
4.1.2.1.3	Message Change Error Procedures	None	Message change is not supported
4.2	Message Return	Full
4.3	Syntax Error	Full
5	SCCP Management Procedures
5.1	General	Full
5.2	Signaling Point Status Management
5.2.1	General	Full
5.2.2	Signaling Point Prohibited	Partial	Traffic Information Management is not supported
5.2.3	Signaling Point Allowed	Partial	Traffic Information Management is not supported
5.2.4	Signaling Point Congested	Full
5.2.5	SCCP Reaction to Local MTP Restart	Full
5.3.2	Subsystem Prohibited
5.3.2.1	Receipt of Message for a Prohibited Subsystem	Full
5.3.2.2	Receipt of Subsystem-Prohibited Message or N-STATE Request Primitive or Local User Failed	Partial	Traffic Information Management is not supported
5.3.3	Subsystem Allowed	Partial	Traffic Information Management is not supported
5.3.4	Subsystem Status Test
5.3.4.1	General	Full
5.3.4.2	Actions at the Initiating Node	Full
5.3.4.3	Actions at the Receiving Node	Full
5.3.5	Coordinated State Change
5.3.5.1	General	None	Coordinated state change is not supported
5.3.5.2	Actions at the Requesting Node	None	Coordinated state change is not supported
5.3.5.3	Actions at the Requested Node	None	Coordinated state change is not supported
5.3.6	Local Broadcast
5.3.6.1	General	None	Not compliant. Procedure is not supported.
5.3.6.2	User-out-of-service	None	Not compliant - see 5.3.6.1
5.3.6.3	User-in-service	None	Not compliant - see 5.3.6.1
5.3.6.4	Signaling Point Inaccessible	None	Not compliant - see 5.3.6.1
5.3.6.5	Signaling Point Accessible	None	Not compliant - see 5.3.6.1
5.3.6.6	Signaling Point Congested	None	Not compliant - see 5.3.6.1
5.3.6.7	SCCP Inaccessible	None	Not compliant - see 5.3.6.1
5.3.6.8	SCCP Accessible	None	Not compliant - see 5.3.6.1
5.3.7	Broadcast
5.3.7.1	General	Full
5.3.7.2	Subsystem Prohibited	Partial	Only for local subsystem
5.3.7.3	Subsystem Allowed	Partial	Only for local subsystem
5.4	Traffic Information Management	None	Traffic Information Management is not implemented
5.4.1	General	None	Not compliant - see 5.4
5.4.2	Traffic Mix Procedures	None	Not compliant - see 5.4
5.4.2.1	End-Node/Database
5.4.2.1.1	Traffic-Mix Information	None	Not compliant - see 5.4
5.4.2.1.2	Subsystem Backup Routing	None	Not compliant - see 5.4
5.4.2.1.3	Subsystem Normal Routing	None	Not compliant - see 5.4
5.4.3	Calculation of Traffic-Mix Information
5.4.3.1	General	None	Not compliant - see 5.4
5.4.3.2	End-Node/Database	None	Not compliant - see 5.4
5.4.4	Subsystem Routing Status Test
5.4.4.1	General	None	Not compliant - see 5.4
5.4.4.2	Actions at the Initiating Node	None	Not compliant - see 5.4
5.4.4.3	Actions at the Receiving Node	None	Not compliant - see 5.4
5.5	SCCP Flow Control
5.5.1	General	Full
5.5.2	SCCP Prohibited Control	Full
5.5.3	SCCP Allowed Control	Full
5.5.4	SCCP Status Test	Full
5.6	SCCP Restart	Full
D	Intermediate Signaling Network Identification Features	None	ISNI is not implemented
D.1	Protocol and Procedural Assumptions	None	Not compliant - see D
D.2	Procedures for ISNI Constrained Routing	None	Not compliant - see D
D.2.1	Actions at the Origination SEP	None	Not compliant - see D
D.2.2	Actions at an ISNI-Capable SCCP Relay Node
D.2.2.1	Invocation of the ISNI Routing Function	None	Not compliant - see D
D.2.3	Actions at a Not-ISNI-Capable SCCP Relay Node	None	Not compliant - see D
D.2.4	Actions at the Destination SEP	None	Not compliant - see D
D.2.5	Error Conditions	None	Not compliant - see D
D.3	Procedures for Identification
D.3.1	Actions at the Origination SEP	None	Not compliant - see D
D.3.2	Actions at an ISNI-Capable SCCP Relay Node
D.3.2.1	Invocation of the Identification Function	None	Not compliant - see D
D.3.3	Actions at a Not-ISNI-Capable SCCP Relay Node	None	Not compliant - see D
D.3.4	Actions at the Destination SEP	None	Not compliant - see D
D.3.5	Error Conditions	None	Not compliant - see D
D.4	Error Handling Procedures (Message Return)	None	Not compliant - see D
D.4.1	Procedures for Deriving the XUDTS Message	None	Not compliant - see D
D.4.2	Procedures at SCCP Relay Nodes
D.4.2.1	Actions at an ISNI-Capable SCCP Relay Node
D.4.2.1.1	Invocation of the ISNI Routing Function	None	Not compliant - see D
D.4.2.1.2	Invocation of the ISNI Identification Function	None	Not compliant - see D
D.4.2	Actions at a Not-ISNI-Capable SCCP Relay Node	None	Not compliant - see D
D.4.3	Actions at the Destination Node	None	Not compliant - see D
E	Intermediate Signaling Network Identification SDL	None	Not compliant - see D
F	Examples of ISNI Message Content	None	Not compliant - see D
G.	Intermediate Network Signaling (INS) Procedures	None	INS is not implemented
G.1	Protocol and Procedural Assumptions	None	Not compliant - see G
G.2	Formats of the Optional SCCP INS Parameter	None	Not compliant - see G
G.3	Procedures for Routing Using the INS Capability
G.3.1	Actions at the Origination SEP	None	Not compliant - see G
G.3.2	Actions at the INS Capable SCCP Relay Node
G.3.2.1	Invocation of the INS Function	None	Not compliant - see G
G.3.3	Actions at a Non-INS-Capable SCCP Relay Node	None	Not compliant - see G
G.3.4	Actions at the Destination SEP	None	Not compliant - see G
G.3.5	Abnormal Procedures
G.3.5.1	Actions at an INS-Capable SCCP Relay Node	None	Not compliant - see G
G.3.6	Error Conditions	None	Not compliant - see G
G.4	Error Handling Procedures	None	Not compliant - see G
G.5	Procedures for Deriving the XUDTS Message	None	Not compliant - see G
G.6	SDL	None	Not compliant - see G

Description

Compliance

Notes

Scope, Purpose and Application

1.1

General Characteristics of Signaling Connection Control Procedures

1.1.1

Purpose

1.1.2

Protocol Classes

Partial

Class 2 and class 3 are not supported

1.1.2.1

Protocol Class 0

Full

1.1.2.2

Protocol Class 1

Full

1.1.2.3

Protocol Class 2

None

1.1.2.4

Protocol Class 3

None

1.1.3

Signaling Connections

None

Connection-oriented protocol classes are not supported

1.1.4

Compatibility and Handling of Unrecognized Information

1.1.4.1

Rules for Forwards Compatibility

Full

1.1.4.2

Handling of Unrecognized Messages or Parameters

Full

1.1.4.3

Handling of Unsupported Optional Parameter Value

Full

1.1.4.4

Treatment of Spare Fields

Full

1.1.4.5

Handling of Gaps

Full

1.2

Overview of Procedures for Connection-Oriented Services

1.2.1

Connection Establishment

None

Connection-oriented services are not implemented

1.2.2

Data Transfer

None

Connection-oriented services are not implemented

1.2.3

Connection Release

None

Connection-oriented services are not implemented

1.3

Overview of Procedures for Connectionless Services

1.3.1

General

Partial

Acting as a relay node is not supported

1.4

Structure of the SCCP and Contents of Specification

Partial

Connection-oriented control is not implemented

Addressing and Routing

2.1

SCCP Addressing

Full

2.2

SCCP Routing Principles

Full

2.2.1

Receipt of SCCP Message Transferred by the MTP

Full

2.2.2

Messages from Connection-Oriented or Connectionless Control to SCCP Routing Control

Partial

Connection-oriented control is not implemented

2.2.2.1

DPC Present

Full

2.2.2.2

Translation Required

Full

2.3

SCCP Routing

2.3.1

Receipt of SCCP Message Transferred by the MTP

Partial

Connection-oriented services are not supported

2.3.2

Messages from Connectionless or Connection-Oriented Control to SCCP Routing Control

Partial

Connection-oriented control is not implemented

2.4

Routing Failures

Partial

Connection-oriented messages are not supported

2.5

Compatibility Test

Partial

Sending of LUDT messages is not supported

Connection-Oriented Procedures

Connection-oriented procedures are not supported

3.1

Connection Establishment

3.1.1

General

None

Not supported - see 3

3.1.2

Local Reference Numbers

None

Not supported - see 3

3.1.3

Negotiation Procedures

3.1.3.1

Protocol Class Negotiation

None

Not supported - see 3

3.1.3.2

Flow Control Credit Negotiation

None

Not supported - see 3

3.1.4

Actions at the Originating Node

3.1.4.1

Initial Actions

None

Not supported - see 3

3.1.4.2

Subsequent Actions

None

Not supported - see 3

3.1.5

Actions at a Relay Node with Coupling

3.1.5.1

Initial Action

None

Not supported - see 3

3.1.5.2

Subsequent Actions

None

Not supported - see 3

3.1.6

Actions at the Destination Node

3.1.6.1

Initial Actions

None

Not supported - see 3

3.1.6.2

Subsequent Actions

None

Not supported - see 3

3.2

Connection Refusal

None

Not supported - see 3

3.2.1

Actions at Node Initiating Connection Refusal

None

Not supported - see 3

3.2.1.1

Initiating Connection Refusal at the Destination Node

None

Not supported - see 3

3.2.1.2

Initiating Connection Refusal at a Relay Node

None

Not supported - see 3

3.2.1.3

Initiating Connection Refusal at the Originating Node

None

Not supported - see 3

3.2.2

Actions at a Relay Node Not Initiating Connection Refusal

None

Not supported - see 3

3.2.3

Actions at the Originating Node Not Initiating Connection Refusal

None

Not supported - see 3

3.3

Connection Release

Not supported - see 3

3.3.1

General

None

Not supported - see 3

3.3.2

Frozen Reference

None

Not supported - see 3

3.3.3

Actions at an End Node Initiating Connection Release

Not supported - see 3

3.3.3.1

Initial Actions

None

Not supported - see 3

3.3.3.2

Subsequent Actions

None

Not supported - see 3

3.3.4

Actions at a Relay Node

None

Not supported - see 3

3.3.4.1

Initial Actions

None

Not supported - see 3

3.3.4.2

Subsequent Actions

None

Not supported - see 3

3.3.5

Actions at an End Node Not Initiating Connection Release

None

Not supported - see 3

3.4

Inactivity Control

None

Not supported - see 3

3.5

Data Transfer

Not supported - see 3

3.5.1

General

None

Not supported - see 3

3.5.1.1

Actions at the Originating Node

None

Not supported - see 3

3.5.1.2

Actions at a Relay Node

None

Not supported - see 3

3.5.1.3

Actions at the Destination Node

None

Not supported - see 3

3.5.2

Flow Control

Not supported - see 3

3.5.2.1

General

None

Not supported - see 3

3.5.2.2

Sequence Numbering

None

Not supported - see 3

3.5.2.3

Flow Control Window

None

Not supported - see 3

3.5.2.4

Flow Control Procedures

Not supported - see 3

3.5.2.4.1

Transfer of DT 2 Messages

None

Not supported - see 3

3.5.2.4.2

Transfer of AK Messages

None

Not supported - see 3

3.5.2.4.3

Reception of a Data or AK Message

None

Not supported - see 3

3.5.3

Segmenting and Reassembly

None

Not supported - see 3

3.6

Expedited Data Transfer

3.6.1

General

None

Not supported - see 3

3.6.2

Actions at the Originating Node

None

Not supported - see 3

3.6.3

Actions at a Relay Node

None

Not supported - see 3

3.6.4

Actions at the Destination Node

None

Not supported - see 3

3.7

Reset

3.7.1

General

None

Not supported - see 3

3.7.2

Action at an End Node Initiating the Reset Procedure

3.7.2.1

Initial Actions

None

Not supported - see 3

3.7.2.2

Subsequent Actions

None

Not supported - see 3

3.7.3

Actions at a Relay Node

3.7.3.1

Initial Actions

None

Not supported - see 3

3.7.3.2

Subsequent Actions

None

Not supported - see 3

3.8

Restart

3.8.1

General

None

Not supported - see 3

3.8.2

Actions at the Recovered Node

3.8.2.1

Initial Actions

None

Not supported - see 3

3.8.2.2

Subsequent Actions

None

Not supported - see 3

3.9

Permanent Signaling Connections

None

Not supported - see 3

3.10

Abnormalities

3.10.1

General

None

Not supported - see 3

3.10.2

Syntax Error

None

Not supported - see 3

3.10.3

Action Tables

None

Not supported - see 3

3.10.4

Action Upon the Reception of an ERR Message

None

Not supported - see 3

Connectionless Procedures

Full

Relax usage of LUDT/LUDTS messages

4.1

Data Transfer

Partial

Only UDT, UDTS, XUDT and XUDTS messages are sent

4.1.1

Segmentation/Reassembly

4.1.1.1

Segmentation

4.1.1.1.1

General

Partial

LUDT is not supported

4.1.1.1.2

Normal Procedures

Partial

LUDT is not supported

4.1.1.1.3

Return on Error Procedures

Partial

LUDT and LUDTS are not supported

4.1.1.2

Reassembly

4.1.1.2.1

General

Partial

LUDT is not supported

4.1.1.2.2

Normal Procedures

Partial

LUDT is not supported

4.1.1.2.3

Return on Error Procedures

Full

LUDT and LUDTS are not supported

4.1.2

Message Change

None

4.1.2.1

UDT(S)/XUDT(S) Change Procedures

None

Message change is not supported

4.1.2.1.1

SCCP Relay Node

4.1.2.1.1.1

UDT(S) to XUDT(S) Message Change

None

Relay Node operation is not supported

4.1.2.1.1.2

XUDT(S) to UDT(S) Mesasge Change

None

Relay Node operation is not supported

4.1.2.1.2

XUDT(S) capable end node

None

Message change is not supported

4.1.2.1.3

Message Change Error Procedures

None

Message change is not supported

4.2

Message Return

Full

4.3

Syntax Error

Full

SCCP Management Procedures

5.1

General

Full

5.2

Signaling Point Status Management

5.2.1

General

Full

5.2.2

Signaling Point Prohibited

Partial

Traffic Information Management is not supported

5.2.3

Signaling Point Allowed

Partial

Traffic Information Management is not supported

5.2.4

Signaling Point Congested

Full

5.2.5

SCCP Reaction to Local MTP Restart

Full

5.3.2

Subsystem Prohibited

5.3.2.1

Receipt of Message for a Prohibited Subsystem

Full

5.3.2.2

Receipt of Subsystem-Prohibited Message or N-STATE Request Primitive or Local User Failed

Partial

Traffic Information Management is not supported

5.3.3

Subsystem Allowed

Partial

Traffic Information Management is not supported

5.3.4

Subsystem Status Test

5.3.4.1

General

Full

5.3.4.2

Actions at the Initiating Node

Full

5.3.4.3

Actions at the Receiving Node

Full

5.3.5

Coordinated State Change

5.3.5.1

General

None

Coordinated state change is not supported

5.3.5.2

Actions at the Requesting Node

None

Coordinated state change is not supported

5.3.5.3

Actions at the Requested Node

None

Coordinated state change is not supported

5.3.6

Local Broadcast

5.3.6.1

General

None

Not compliant. Procedure is not supported.

5.3.6.2

User-out-of-service

None

Not compliant - see 5.3.6.1

5.3.6.3

User-in-service

None

Not compliant - see 5.3.6.1

5.3.6.4

Signaling Point Inaccessible

None

Not compliant - see 5.3.6.1

5.3.6.5

Signaling Point Accessible

None

Not compliant - see 5.3.6.1

5.3.6.6

Signaling Point Congested

None

Not compliant - see 5.3.6.1

5.3.6.7

SCCP Inaccessible

None

Not compliant - see 5.3.6.1

5.3.6.8

SCCP Accessible

None

Not compliant - see 5.3.6.1

5.3.7

Broadcast

5.3.7.1

General

Full

5.3.7.2

Subsystem Prohibited

Partial

Only for local subsystem

5.3.7.3

Subsystem Allowed

Partial

Only for local subsystem

5.4

Traffic Information Management

None

Traffic Information Management is not implemented

5.4.1

General

None

Not compliant - see 5.4

5.4.2

Traffic Mix Procedures

None

Not compliant - see 5.4

5.4.2.1

End-Node/Database

5.4.2.1.1

Traffic-Mix Information

None

Not compliant - see 5.4

5.4.2.1.2

Subsystem Backup Routing

None

Not compliant - see 5.4

5.4.2.1.3

Subsystem Normal Routing

None

Not compliant - see 5.4

5.4.3

Calculation of Traffic-Mix Information

5.4.3.1

General

None

Not compliant - see 5.4

5.4.3.2

End-Node/Database

None

Not compliant - see 5.4

5.4.4

Subsystem Routing Status Test

5.4.4.1

General

None

Not compliant - see 5.4

5.4.4.2

Actions at the Initiating Node

None

Not compliant - see 5.4

5.4.4.3

Actions at the Receiving Node

None

Not compliant - see 5.4

5.5

SCCP Flow Control

5.5.1

General

Full

5.5.2

SCCP Prohibited Control

Full

5.5.3

SCCP Allowed Control

Full

5.5.4

SCCP Status Test

Full

5.6

SCCP Restart

Full

Intermediate Signaling Network Identification Features

None

ISNI is not implemented

D.1

Protocol and Procedural Assumptions

None

Not compliant - see D

D.2

Procedures for ISNI Constrained Routing

None

Not compliant - see D

D.2.1

Actions at the Origination SEP

None

Not compliant - see D

D.2.2

Actions at an ISNI-Capable SCCP Relay Node

D.2.2.1

Invocation of the ISNI Routing Function

None

Not compliant - see D

D.2.3

Actions at a Not-ISNI-Capable SCCP Relay Node

None

Not compliant - see D

D.2.4

Actions at the Destination SEP

None

Not compliant - see D

D.2.5

Error Conditions

None

Not compliant - see D

D.3

Procedures for Identification

D.3.1

Actions at the Origination SEP

None

Not compliant - see D

D.3.2

Actions at an ISNI-Capable SCCP Relay Node

D.3.2.1

Invocation of the Identification Function

None

Not compliant - see D

D.3.3

Actions at a Not-ISNI-Capable SCCP Relay Node

None

Not compliant - see D

D.3.4

Actions at the Destination SEP

None

Not compliant - see D

D.3.5

Error Conditions

None

Not compliant - see D

D.4

Error Handling Procedures (Message Return)

None

Not compliant - see D

D.4.1

Procedures for Deriving the XUDTS Message

None

Not compliant - see D

D.4.2

Procedures at SCCP Relay Nodes

D.4.2.1

Actions at an ISNI-Capable SCCP Relay Node

D.4.2.1.1

Invocation of the ISNI Routing Function

None

Not compliant - see D

D.4.2.1.2

Invocation of the ISNI Identification Function

None

Not compliant - see D

D.4.2

Actions at a Not-ISNI-Capable SCCP Relay Node

None

Not compliant - see D

D.4.3

Actions at the Destination Node

None

Not compliant - see D

Intermediate Signaling Network Identification SDL

None

Not compliant - see D

Examples of ISNI Message Content

None

Not compliant - see D

Intermediate Network Signaling (INS) Procedures

None

INS is not implemented

G.1

Protocol and Procedural Assumptions

None

Not compliant - see G

G.2

Formats of the Optional SCCP INS Parameter

None

Not compliant - see G

G.3

Procedures for Routing Using the INS Capability

G.3.1

Actions at the Origination SEP

None

Not compliant - see G

G.3.2

Actions at the INS Capable SCCP Relay Node

G.3.2.1

Invocation of the INS Function

None

Not compliant - see G

G.3.3

Actions at a Non-INS-Capable SCCP Relay Node

None

Not compliant - see G

G.3.4

Actions at the Destination SEP

None

Not compliant - see G

G.3.5

Abnormal Procedures

G.3.5.1

Actions at an INS-Capable SCCP Relay Node

None

Not compliant - see G

G.3.6

Error Conditions

None

Not compliant - see G

G.4

Error Handling Procedures

None

Not compliant - see G

G.5

Procedures for Deriving the XUDTS Message

None

Not compliant - see G

G.6

SDL

None

Not compliant - see G

M3UA RFC.4666 - SS7 MTP3 User Adaptation Layer

Empty cells are descriptive text only

	Description	Compliance	Notes
1	Introduction
1.1	Scope
1.2	Terminology
1.3	M3UA Overview
1.3.1	Protocol Architecture
1.3.2	Services Provided by the M3UA Layer
1.3.2.1	Support for the Transport of MTP3-User Messages	Full
1.3.2.2	Native Management Functions	Full
1.3.2.3	Interworking with MTP3 Network Management Functions	Partial	SGP role is not supported.
1.3.2.4	Support for the Management of SCTP Associations between SG and ASPs	Full
1.3.2.5	Support for the Management of Connections to Multiple SGs	Full
1.4	Functional Areas
1.4.1	Signaling Point Code Representation
1.4.2	Routing Contexts and Routing Keys
1.4.2.1	Overview	Full
1.4.2.2	Routing Key Limitations	Full
1.4.2.3	Managing Routing Contexts and Routing Keys	Partial	Dynamic key registration is not supported.
1.4.2.4	Message Distribution at the SGP	None	SGP role is not supported.
1.4.2.5	Message Distribution at the ASP	Full
1.4.3	SS7 and M3UA Interworking
1.4.3.1	Signaling Gateway SS7 Layers
1.4.3.2	SS7 and M3UA Interworking at the SGC	Partial	Complied in areas regarding ASP.
1.4.3.3	Application Server	Full
1.4.3.4	IPSP Considerations
1.4.4	Redundancy Models
1.4.4.1	Application Server Redundancy	Partial	n+0 model is supported.
1.4.5	Flow Control	Full
1.4.6	Congestion Management	None	Congestion indication mechanism in M3UA layer is not supported.
1.4.7	SCTP Stream Mapping	Full
1.4.8	SCTP Client/Server Model	Full
1.5	Sample Configurations
1.5.1	Example 1: ISUP Message Transport	None	No M3UA user other than SCCP is supported.
1.5.2	Example 2: SCCP Transport between IPSPs	Full
1.5.3	Example 3: SGC Resident SCCP Layer	Partial	Compliant in areas regarding ASP.
1.6	Definition of M3UA Boundaries
1.6.2	Definition of the Boundary between M3UA and SCTP
1.6.3	Definition of the Boundary between M3UA and Layer Management
2	Conventions
3	M3UA Protocol Elements	Full
3.1	Common Message Header	Full
3.1.1	M3UA Protocol Versions: 8 bit (unsigned integer)	Full
3.1.2	Message Classes and Types	Full
3.1.3	Reserved: 8 bit	Full
3.1.4	Message Length: 32 bit (unsigned integer)	Full
3.2	Variable-Length Parameter Format	Full
3.3	Transfer Messages
3.3.1	Payload Data Message (DATA)	Full
3.4	SS7 Signaling Network Management (SSNM) Messages
3.4.1	Destination Unavailable (DUNA)	Full
3.4.2	Destination Available (DAVA)	Full
3.4.3	Destination State Audit (DAUD)	Full
3.4.4	Signaling Congestion (SCON)	Full
3.4.5	Destination User Part Unavailable (DUPU)	Full
3.4.6	Destination Restricted (DRST)	Full
3.5	ASP State Maintenance (ASPSM) Messages
3.5.1	ASP Up	Full
3.5.2	ASP Up Acknowledgement (ASP Up Ack)	Full
3.5.3	ASP Down	Full
3.5.4	ASP Down Acknowledgement (ASP Down Ack)	Full
3.5.5	Heartbeat (BEAT)	Partial	BEAT message is only acknowledged, not sent.
3.5.6	Heartbeat Acknowledgement (BEAT Ack)	Full
3.6	Routing Key Management (RKM) Messages (Optional)	None	Routing Key Management is not supported.
3.6.1	Registration Request (REG REQ)	None	Routing Key Management is not supported.
3.6.2	Registration Response (REG RSP)	None	Routing Key Management is not supported.
3.6.3	Deregistration Request (DEREG REQ)	None	Routing Key Management is not supported.
3.6.4	Deregistration Response (DEREG RSP)	None	Routing Key Management is not supported.
3.7	ASP Traffic Maintenance (SPTM) Messages
3.7.1	ASP Active	Full
3.7.2	ASP Active Acknowledgement (ASP Active Ack)	Full
3.7.3	ASP Inactive	Full
3.7.4	ASP Inactive Acknowledgement (ASP Inactive Ack)	Full
3.8	Management (MGMT) Messages
3.8.1	Error	Full
3.8.2	Notify	Full
4	Procedures
4.1	Procedures to Support the M3UA-User
4.1.1	Receipt of Primitives from the M3UA-User	Full
4.2	Receipt of Primitives from Layer Management	Full
4.2.1	Receipt of M3UA Peer Management Messages	Full
4.3	AS and ASP/IPSP State Maintenance	Partial	IPSP DE model is not supported.
4.3.1	ASP/IPSP States	Full
4.3.2	AS States	Full
4.3.3	M3UA Management Procedures for Primitives	Full
4.3.4	ASP Procedures for Peer-to-Peer Messages
4.3.4.1	ASP Up Procedures	Full
4.3.4.1.1	M3UA Version Control and ASP Up	Full
4.3.4.1.2	IPSP Considerations (ASP Up)	Full
4.3.4.2	ASP Down Procedures	Partial	After reaching limit of unacknowledged ASP-DOWN requests, SCTP association is shut down.
4.3.4.3	ASP Active Procedures	Partial	Only Loadshare traffic mode is supported.
4.3.4.3.1	IPSP Consideration (ASP Active)	Full
4.3.4.4	ASP Inactive Procedures	Full
4.3.4.4	IPSP Considerations (ASP Inactive)	Full
4.3.4.5	Notify Procedures	Full
4.3.4.5.1	IPSP Considerations (NTFY)	Full
4.3.4.6	Heartbeat Procedures	Partial	Only reception of BEAT message is supported.
4.4	Routing Key Management Procedures (Optional)
4.4.1	Registration	None	Routing Key Management is not supported.
4.4.2	Deregistration	None	Routing Key Management is not supported.
4.4.3	IPSP Consideration (REG/DEREG)	None	Routing Key Management is not supported.
4.5	Procedures to Support the Availability or Congestion Status of SS7 Destination
4.5.1	At an SGP	Partial	Only ASP related procedures are supported.
4.5.2	At an ASP
4.5.2.1	Single SG Configurations	Partial	Congestion status is not supported.
4.5.2.2	Multiple SG Configurations	Partial	Congestion status is not supported.
4.6	MTP3 Restart	Full
4.7	NIF Not Available	None	SGP role is not supported
4.8	M3UA Version Control	Full
4.9	M3UA Termination	Full
5	Examples of M3UA Procedures
5.1	Establishment of Associations and Traffic between SGs and ASPs	Full
5.1.1	Single ASP in an Application Server (1+0 sparing)	Full
5.1.1.1	Single ASP/IPSP in an Application Server (1+0 sparing) No Registration	Full
5.1.1.2	Single ASP in an Application Server (1+0 sparing) Dynamic Registration	None	Routing Key Management is not supported.
5.1.1.3	Single ASP in Multiple Application Servers (each with 1+0 sparing), Dynamic Registration (Case 1 - Multiple Registration Requests)	None	Routing Key Management is not supported.
5.1.1.4	Multiple Servers (each with 1+0 sparing), Dynamic Registration (Case 1 - Multiple Registration Requests)	None	Routing Key Management is not supported.
5.1.2	Two ASPs in Application Server (1+1 sparing)	None	1+1 sparing is not supported.
5.1.3	Two ASPs in Application Server (1+1 sparing, loadsharing case)	Full
5.1.4	Three ASPs in Application Server (n+k sparing, loadsharing case)	None	n+k sparing is not supported.
5.2	ASP/IPSP Traffic Failover Examples
5.2.1	1+1 sparing", Withdrawal of ASP/IPSP, Backup Override	None	1+1 sparing is not supported.
5.2.2	1+1 sparing", Backup Override	None	1+1 sparing is not supported.
5.2.3	n+k" sparing, Loadsharing case, Withdrawal of ASP	None	n+k sparing is not supported.
5.3	Normal Withdrawal of an ASP from an Application Server and Teardown of an Association Will Not be Sent/Received	None	Routing Key Management is not supported.
5.4	Auditing Examples
5.4.1	SG State: Uncongested/Available	Full
5.4.2	SG State: Congested (Congestion Level=2)/Available	Full
5.4.3	SG State: Unknown/Available	Full
5.5	M3UA/MTP3-User Boundary Examples
5.5.1	At an ASP
5.5.1.1	Support for MTP Transfer on the ASP
5.5.1.1.1	Support for MTP Transfer Request Primitive	Full
5.5.1.1.2	Support for MTP Transfer Indication Primitive	Full
5.5.1.1.3	Support for ASP Querying of SS7 Destination States	Full
5.5.2	At an SGP	Full
5.5.2.1	Support for MTP Transfer Request Primitive	Full
5.5.2.2	Support for MTP Transfer Indication Primitive	Full
5.5.2.3	Resume MTP Status Indication Primitive
5.5.2.3.1	Destination Unavailable	Full
5.5.2.3.2	Destination Available	Full
5.5.2.3.3	SS7 Network Congestion	None	Congestion levels are not interpreted at ASP.
5.5.2.3.4	Destination User Part Available	Full
5.6	Examples of IPSP communication
5.6.1	Single Exchange	Full
5.6.2	Double Exchange	None	Double Exchnage mode is not supported.
6	Security Considerations	None	SIGTRAN over TLS is not supported.
7	IANA Considerations
7.1	SCTP Payload Protocol Identifier	Full
7.2	M3UA Port Number	Full
7.3	M3UA Protocol Extentions	Full
7.3.1	IETF Defined Message Classes
7.3.2	IETF Defined Message Types

Description

Compliance

Notes

Introduction

1.1

Scope

1.2

Terminology

1.3

M3UA Overview

1.3.1

Protocol Architecture

1.3.2

Services Provided by the M3UA Layer

1.3.2.1

Support for the Transport of MTP3-User Messages

Full

1.3.2.2

Native Management Functions

Full

1.3.2.3

Interworking with MTP3 Network Management Functions

Partial

SGP role is not supported.

1.3.2.4

Support for the Management of SCTP Associations between SG and ASPs

Full

1.3.2.5

Support for the Management of Connections to Multiple SGs

Full

1.4

Functional Areas

1.4.1

Signaling Point Code Representation

1.4.2

Routing Contexts and Routing Keys

1.4.2.1

Overview

Full

1.4.2.2

Routing Key Limitations

Full

1.4.2.3

Managing Routing Contexts and Routing Keys

Partial

Dynamic key registration is not supported.

1.4.2.4

Message Distribution at the SGP

None

SGP role is not supported.

1.4.2.5

Message Distribution at the ASP

Full

1.4.3

SS7 and M3UA Interworking

1.4.3.1

Signaling Gateway SS7 Layers

1.4.3.2

SS7 and M3UA Interworking at the SGC

Partial

Complied in areas regarding ASP.

1.4.3.3

Application Server

Full

1.4.3.4

IPSP Considerations

1.4.4

Redundancy Models

1.4.4.1

Application Server Redundancy

Partial

n+0 model is supported.

1.4.5

Flow Control

Full

1.4.6

Congestion Management

None

Congestion indication mechanism in M3UA layer is not supported.

1.4.7

SCTP Stream Mapping

Full

1.4.8

SCTP Client/Server Model

Full

1.5

Sample Configurations

1.5.1

Example 1: ISUP Message Transport

None

No M3UA user other than SCCP is supported.

1.5.2

Example 2: SCCP Transport between IPSPs

Full

1.5.3

Example 3: SGC Resident SCCP Layer

Partial

Compliant in areas regarding ASP.

1.6

Definition of M3UA Boundaries

1.6.2

Definition of the Boundary between M3UA and SCTP

1.6.3

Definition of the Boundary between M3UA and Layer Management

Conventions

M3UA Protocol Elements

Full

3.1

Common Message Header

Full

3.1.1

M3UA Protocol Versions: 8 bit (unsigned integer)

Full

3.1.2

Message Classes and Types

Full

3.1.3

Reserved: 8 bit

Full

3.1.4

Message Length: 32 bit (unsigned integer)

Full

3.2

Variable-Length Parameter Format

Full

3.3

Transfer Messages

3.3.1

Payload Data Message (DATA)

Full

3.4

SS7 Signaling Network Management (SSNM) Messages

3.4.1

Destination Unavailable (DUNA)

Full

3.4.2

Destination Available (DAVA)

Full

3.4.3

Destination State Audit (DAUD)

Full

3.4.4

Signaling Congestion (SCON)

Full

3.4.5

Destination User Part Unavailable (DUPU)

Full

3.4.6

Destination Restricted (DRST)

Full

3.5

ASP State Maintenance (ASPSM) Messages

3.5.1

ASP Up

Full

3.5.2

ASP Up Acknowledgement (ASP Up Ack)

Full

3.5.3

ASP Down

Full

3.5.4

ASP Down Acknowledgement (ASP Down Ack)

Full

3.5.5

Heartbeat (BEAT)

Partial

BEAT message is only acknowledged, not sent.

3.5.6

Heartbeat Acknowledgement (BEAT Ack)

Full

3.6

Routing Key Management (RKM) Messages (Optional)

None

Routing Key Management is not supported.

3.6.1

Registration Request (REG REQ)

None

Routing Key Management is not supported.

3.6.2

Registration Response (REG RSP)

None

Routing Key Management is not supported.

3.6.3

Deregistration Request (DEREG REQ)

None

Routing Key Management is not supported.

3.6.4

Deregistration Response (DEREG RSP)

None

Routing Key Management is not supported.

3.7

ASP Traffic Maintenance (SPTM) Messages

3.7.1

ASP Active

Full

3.7.2

ASP Active Acknowledgement (ASP Active Ack)

Full

3.7.3

ASP Inactive

Full

3.7.4

ASP Inactive Acknowledgement (ASP Inactive Ack)

Full

3.8

Management (MGMT) Messages

3.8.1

Error

Full

3.8.2

Notify

Full

Procedures

4.1

Procedures to Support the M3UA-User

4.1.1

Receipt of Primitives from the M3UA-User

Full

4.2

Receipt of Primitives from Layer Management

Full

4.2.1

Receipt of M3UA Peer Management Messages

Full

4.3

AS and ASP/IPSP State Maintenance

Partial

IPSP DE model is not supported.

4.3.1

ASP/IPSP States

Full

4.3.2

AS States

Full

4.3.3

M3UA Management Procedures for Primitives

Full

4.3.4

ASP Procedures for Peer-to-Peer Messages

4.3.4.1

ASP Up Procedures

Full

4.3.4.1.1

M3UA Version Control and ASP Up

Full

4.3.4.1.2

IPSP Considerations (ASP Up)

Full

4.3.4.2

ASP Down Procedures

Partial

After reaching limit of unacknowledged ASP-DOWN requests, SCTP association is shut down.

4.3.4.3

ASP Active Procedures

Partial

Only Loadshare traffic mode is supported.

4.3.4.3.1

IPSP Consideration (ASP Active)

Full

4.3.4.4

ASP Inactive Procedures

Full

4.3.4.4

IPSP Considerations (ASP Inactive)

Full

4.3.4.5

Notify Procedures

Full

4.3.4.5.1

IPSP Considerations (NTFY)

Full

4.3.4.6

Heartbeat Procedures

Partial

Only reception of BEAT message is supported.

4.4

Routing Key Management Procedures (Optional)

4.4.1

Registration

None

Routing Key Management is not supported.

4.4.2

Deregistration

None

Routing Key Management is not supported.

4.4.3

IPSP Consideration (REG/DEREG)

None

Routing Key Management is not supported.

4.5

Procedures to Support the Availability or Congestion Status of SS7 Destination

4.5.1

At an SGP

Partial

Only ASP related procedures are supported.

4.5.2

At an ASP

4.5.2.1

Single SG Configurations

Partial

Congestion status is not supported.

4.5.2.2

Multiple SG Configurations

Partial

Congestion status is not supported.

4.6

MTP3 Restart

Full

4.7

NIF Not Available

None

SGP role is not supported

4.8

M3UA Version Control

Full

4.9

M3UA Termination

Full

Examples of M3UA Procedures

5.1

Establishment of Associations and Traffic between SGs and ASPs

Full

5.1.1

Single ASP in an Application Server (1+0 sparing)

Full

5.1.1.1

Single ASP/IPSP in an Application Server (1+0 sparing) No Registration

Full

5.1.1.2

Single ASP in an Application Server (1+0 sparing) Dynamic Registration

None

Routing Key Management is not supported.

5.1.1.3

Single ASP in Multiple Application Servers (each with 1+0 sparing), Dynamic Registration (Case 1 - Multiple Registration Requests)

None

Routing Key Management is not supported.

5.1.1.4

Multiple Servers (each with 1+0 sparing), Dynamic Registration (Case 1 - Multiple Registration Requests)

None

Routing Key Management is not supported.

5.1.2

Two ASPs in Application Server (1+1 sparing)

None

1+1 sparing is not supported.

5.1.3

Two ASPs in Application Server (1+1 sparing, loadsharing case)

Full

5.1.4

Three ASPs in Application Server (n+k sparing, loadsharing case)

None

n+k sparing is not supported.

5.2

ASP/IPSP Traffic Failover Examples

5.2.1

1+1 sparing", Withdrawal of ASP/IPSP, Backup Override

None

1+1 sparing is not supported.

5.2.2

1+1 sparing", Backup Override

None

1+1 sparing is not supported.

5.2.3

n+k" sparing, Loadsharing case, Withdrawal of ASP

None

n+k sparing is not supported.

5.3

Normal Withdrawal of an ASP from an Application Server and Teardown of an Association Will Not be Sent/Received

None

Routing Key Management is not supported.

5.4

Auditing Examples

5.4.1

SG State: Uncongested/Available

Full

5.4.2

SG State: Congested (Congestion Level=2)/Available

Full

5.4.3

SG State: Unknown/Available

Full

5.5

M3UA/MTP3-User Boundary Examples

5.5.1

At an ASP

5.5.1.1

Support for MTP Transfer on the ASP

5.5.1.1.1

Support for MTP Transfer Request Primitive

Full

5.5.1.1.2

Support for MTP Transfer Indication Primitive

Full

5.5.1.1.3

Support for ASP Querying of SS7 Destination States

Full

5.5.2

At an SGP

Full

5.5.2.1

Support for MTP Transfer Request Primitive

Full

5.5.2.2

Support for MTP Transfer Indication Primitive

Full

5.5.2.3

Resume MTP Status Indication Primitive

5.5.2.3.1

Destination Unavailable

Full

5.5.2.3.2

Destination Available

Full

5.5.2.3.3

SS7 Network Congestion

None

Congestion levels are not interpreted at ASP.

5.5.2.3.4

Destination User Part Available

Full

5.6

Examples of IPSP communication

5.6.1

Single Exchange

Full

5.6.2

Double Exchange

None

Double Exchnage mode is not supported.

Security Considerations

None

SIGTRAN over TLS is not supported.

IANA Considerations

7.1

SCTP Payload Protocol Identifier

Full

7.2

M3UA Port Number

Full

7.3

M3UA Protocol Extentions

Full

7.3.1

IETF Defined Message Classes

7.3.2

IETF Defined Message Types

SCCP Q.711 - Functional Description

Empty cells are descriptive text only

	Description	Compliance	Notes
1	Scope and field of application
2	References
2.1	Normative references
2.2	Informative references
3	Definitions
3.1	MTP-SAP instance
3.2	SCCP-SAP instance
4	Abbreviations and acronyms
5	General characteristics
5.1	Technique of description	Full
5.2	Primitives	Full
5.3	Peer-to-peer communication	Full
5.4	Model of the connection-oriented network service	None	Connection-oriented services are not supported.
5.5	Model of the connectionless network service	Full
5.6	Contents of the Q.71X-Series of Recommendations
6	Services provided by the SCCP	Partial	Class 2 and class 3 services are not implemented.
6.1	Connection-oriented services	None	Connection-oriented services are not supported.
6.1.1	Temporary signalling connections
6.1.1.1	Description	None	See 6.1
6.1.1.1.1	Connection establishment phase	None	See 6.1
6.1.1.1.2	Data transfer phase	None	See 6.1
6.1.1.1.3	Connection release phase	None	See 6.1
6.1.1.2	Network service primitives and parameters
6.1.1.2.1	Overview	None	See 6.1
6.1.1.2.2	Connection establishment phase	None	See 6.1
6.1.1.2.3	Data transfer phase	None	See 6.1
6.1.1.2.4	Release phase	None	See 6.1
6.1.1.3	Additional SCCP primitive and interface elements	None	See 6.1
6.1.1.3.1	Notice service	None	See 6.1
6.1.1.3.2	Connection establishment interface elements	None	See 6.1
6.1.2	Permanent signalling connections
6.1.2.1	Description	None	See 6.1
6.1.2.2	Primitives and parameters	None	See 6.1
6.2	Connectionless services	Full
6.2.1	Description	Full
6.2.2	Primitives and parameters of the connectionless service
6.2.2.1	Overview	Full
6.2.2.2	Parameters
6.2.2.2.1	Address	Full
6.2.2.2.2	Sequence control	Full
6.2.2.2.3	Return option	Full
6.2.2.2.4	Reason for return	Full
6.2.2.2.5	User data	Full
6.2.2.2.6	Importance	None	Parameter not supported
6.2.2.3	Primitives
6.2.2.3.1	UNITDATA	Full
6.2.2.3.2	NOTICE	Full
6.2.3	State transition diagram	Full
6.3	SCCP management
6.3.1	Description	Full
6.3.2	Primitives and parameters of the SCCP management
6.3.2.1	Overview	None	N-COORD not supported
6.3.2.2	Parameters
6.3.2.2.1	Affected subsystem	Full
6.3.2.2.2	User status	None	Parameter ignored
6.3.2.2.3	Subsystem multiplicity indicator	None	Parameter ignored
6.3.2.2.4	Affected signalling point	Full
6.3.2.2.5	Signalling point status	Full
6.3.2.2.6	Remote SCCP status	Full
6.3.2.2.7	Restricted importance level	None	Parameter ignored
6.3.2.3	Primitives
6.3.2.3.1	COORD	None	Not supported - see also 6.3.2.1
6.3.2.3.2	STATE	Full
6.3.2.3.3	PCSTATE	Partial	Restrictyed importance level not supported - see also 6.3.2.2.7
7	Definition of the lower boundary of the SCCP
7.1	MTP-SAP	Full
7.2	MTP-primitives and parameters	Full
7.2.1	TRANSFER	Full
7.2.2	PAUSE	Full
7.2.3	RESUME	Full
7.2.4	STATUS	Full
7.2.5	Notification of completion of MTP restart procedure	Full
7.3	State transition diagram	Full
8	Functions provided by the SCCP
8.1	Connection-oriented functions	None	Connection-oriented functions are not implemented. See also 6.1
8.1.1	Functions for temporary signalling connections	None	Not compliant - see 8.1
8.1.1.1	Connection establishment functions	None	Not compliant - see 8.1
8.1.1.2	Data transfer phase function	None	Not compliant - see 8.1
8.1.1.3	Release phase functions	None	Not compliant - see 8.1
8.1.2	Functions for permanent signalling connections	None	Not compliant - see 8.1
8.1.2.1	Connection establishment phase and connection release phase functions	None	Not compliant - see 8.1
8.1.2.2	Data transfer phase functions	None	Not compliant - see 8.1
8.2	Connectionless service functions	Full
8.3	Management functions	Partial	Local broadcast is not supported.
8.4	Routing and translation functions	Full

Description

Compliance

Notes

Scope and field of application

References

2.1

Normative references

2.2

Informative references

Definitions

3.1

MTP-SAP instance

3.2

SCCP-SAP instance

Abbreviations and acronyms

General characteristics

5.1

Technique of description

Full

5.2

Primitives

Full

5.3

Peer-to-peer communication

Full

5.4

Model of the connection-oriented network service

None

Connection-oriented services are not supported.

5.5

Model of the connectionless network service

Full

5.6

Contents of the Q.71X-Series of Recommendations

Services provided by the SCCP

Partial

Class 2 and class 3 services are not implemented.

6.1

Connection-oriented services

None

Connection-oriented services are not supported.

6.1.1

Temporary signalling connections

6.1.1.1

Description

None

See 6.1

6.1.1.1.1

Connection establishment phase

None

See 6.1

6.1.1.1.2

Data transfer phase

None

See 6.1

6.1.1.1.3

Connection release phase

None

See 6.1

6.1.1.2

Network service primitives and parameters

6.1.1.2.1

Overview

None

See 6.1

6.1.1.2.2

Connection establishment phase

None

See 6.1

6.1.1.2.3

Data transfer phase

None

See 6.1

6.1.1.2.4

Release phase

None

See 6.1

6.1.1.3

Additional SCCP primitive and interface elements

None

See 6.1

6.1.1.3.1

Notice service

None

See 6.1

6.1.1.3.2

Connection establishment interface elements

None

See 6.1

6.1.2

Permanent signalling connections

6.1.2.1

Description

None

See 6.1

6.1.2.2

Primitives and parameters

None

See 6.1

6.2

Connectionless services

Full

6.2.1

Description

Full

6.2.2

Primitives and parameters of the connectionless service

6.2.2.1

Overview

Full

6.2.2.2

Parameters

6.2.2.2.1

Address

Full

6.2.2.2.2

Sequence control

Full

6.2.2.2.3

Return option

Full

6.2.2.2.4

Reason for return

Full

6.2.2.2.5

User data

Full

6.2.2.2.6

Importance

None

Parameter not supported

6.2.2.3

Primitives

6.2.2.3.1

UNITDATA

Full

6.2.2.3.2

NOTICE

Full

6.2.3

State transition diagram

Full

6.3

SCCP management

6.3.1

Description

Full

6.3.2

Primitives and parameters of the SCCP management

6.3.2.1

Overview

None

N-COORD not supported

6.3.2.2

Parameters

6.3.2.2.1

Affected subsystem

Full

6.3.2.2.2

User status

None

Parameter ignored

6.3.2.2.3

Subsystem multiplicity indicator

None

Parameter ignored

6.3.2.2.4

Affected signalling point

Full

6.3.2.2.5

Signalling point status

Full

6.3.2.2.6

Remote SCCP status

Full

6.3.2.2.7

Restricted importance level

None

Parameter ignored

6.3.2.3

Primitives

6.3.2.3.1

COORD

None

Not supported - see also 6.3.2.1

6.3.2.3.2

STATE

Full

6.3.2.3.3

PCSTATE

Partial

Restrictyed importance level not supported - see also 6.3.2.2.7

Definition of the lower boundary of the SCCP

7.1

MTP-SAP

Full

7.2

MTP-primitives and parameters

Full

7.2.1

TRANSFER

Full

7.2.2

PAUSE

Full

7.2.3

RESUME

Full

7.2.4

STATUS

Full

7.2.5

Notification of completion of MTP restart procedure

Full

7.3

State transition diagram

Full

Functions provided by the SCCP

8.1

Connection-oriented functions

None

Connection-oriented functions are not implemented. See also 6.1

8.1.1

Functions for temporary signalling connections

None

Not compliant - see 8.1

8.1.1.1

Connection establishment functions

None

Not compliant - see 8.1

8.1.1.2

Data transfer phase function

None

Not compliant - see 8.1

8.1.1.3

Release phase functions

None

Not compliant - see 8.1

8.1.2

Functions for permanent signalling connections

None

Not compliant - see 8.1

8.1.2.1

Connection establishment phase and connection release phase functions

None

Not compliant - see 8.1

8.1.2.2

Data transfer phase functions

None

Not compliant - see 8.1

8.2

Connectionless service functions

Full

8.3

Management functions

Partial

Local broadcast is not supported.

8.4

Routing and translation functions

Full

SCCP Q.712 - Defintion and Function

Empty cells are descriptive text only

	Description	Compliance	Notes
1	Signalling connection control part messages	Partial	Connection-oriented service messages are not supported.
1.1	connection confirm (CC)	None	Not compliant - see 1
1.2	connection request (CR)	None	Not compliant - see 1
1.3	connection refused (CREF)	None	Not compliant - see 1
1.4	data acknowledgement (AK)	None	Not compliant - see 1
1.5	data form 1 (DT1)	None	Not compliant - see 1
1.6	data form 2 (DT2)	None	Not compliant - see 1
1.7	expedited data (ED)	None	Not compliant - see 1
1.8	expedited data acknowledgement (EA)	None	Not compliant - see 1
1.9	inactivity test (IT)	None	Not compliant - see 1
1.10	protocol data unit error (ERR)	None	Not compliant - see 1
1.11	released (RLSD)	None	Not compliant - see 1
1.12	release complete (RLC)	None	Not compliant - see 1
1.13	reset confirm (RSC)	None	Not compliant - see 1
1.14	reset request (RSR)	None	Not compliant - see 1
1.15	subsystem-allowed (SSA)	Full
1.16	subsystem-out-of-service-grant (SOG)	None	Message not supported
1.17	subsystem-out-of-service-request (SOR)	None	Message not supported
1.18	subsystem-prohibited (SSP)	Full
1.19	subsystem-status-test (SST)	Full
1.20	unitdata (UDT)	Full
1.21	unitdata service (UDTS)	Full
1.22	extended unitdata (XUDT)	Full
1.23	extended unitdata service (XUDTS)	Full
1.24	subsystem congested (SSC)	Partial	Sending SSC is not implemented.
1.25	long unitdata (LUDT)	Partial	Sending LUDT is not implemented.
1.26	long unitdata service (LUDTS)	Partial	Sending LUDTS is not implemented.
2	SCCP message parameters
2.1	affected point code	Full
2.2	affected subsystem number	Full
2.3	calling/called party address	Full
2.4	credit	None	Parameter not supported.
2.5	data	Full
2.6	diagnostic	None	Parameter not supported.
2.7	error cause	None	Not compliant - see 1
2.8	end of optional parameters	Partial	Only XUDT supports encoding this parameter.
2.9	local reference number (source/destination)	None	Parameter not supported.
2.10	protocol class	Full
2.11	receive sequence number	None	Not compliant - see 1
2.12	refusal cause	None	Not compliant - see 1
2.13	release cause	None	Not compliant - see 1
2.14	reset cause	None	Not compliant - see 1
2.15	return cause	Full
2.16	segmenting/reassembling	None	Not compliant - see 1
2.17	sequencing/segmenting	None	Not compliant - see 1
2.18	subsystem multiplicity indicator	Full
2.19	hop counter	Partial	Parameter value is ignored.
2.20	segmentation	Full
2.21	importance	Partial	Parameter value is ignored.
2.22	congestion level	Partial	Encoding is not implemented.
2.23	long data	Partial	Encoding is not implemented.
3	Inclusion of fields in the messages
4	References
4.1	Normative references
4.2	Informative references

Description

Compliance

Notes

Signalling connection control part messages

Partial

Connection-oriented service messages are not supported.

1.1

connection confirm (CC)

None

Not compliant - see 1

1.2

connection request (CR)

None

Not compliant - see 1

1.3

connection refused (CREF)

None

Not compliant - see 1

1.4

data acknowledgement (AK)

None

Not compliant - see 1

1.5

data form 1 (DT1)

None

Not compliant - see 1

1.6

data form 2 (DT2)

None

Not compliant - see 1

1.7

expedited data (ED)

None

Not compliant - see 1

1.8

expedited data acknowledgement (EA)

None

Not compliant - see 1

1.9

inactivity test (IT)

None

Not compliant - see 1

1.10

protocol data unit error (ERR)

None

Not compliant - see 1

1.11

released (RLSD)

None

Not compliant - see 1

1.12

release complete (RLC)

None

Not compliant - see 1

1.13

reset confirm (RSC)

None

Not compliant - see 1

1.14

reset request (RSR)

None

Not compliant - see 1

1.15

subsystem-allowed (SSA)

Full

1.16

subsystem-out-of-service-grant (SOG)

None

Message not supported

1.17

subsystem-out-of-service-request (SOR)

None

Message not supported

1.18

subsystem-prohibited (SSP)

Full

1.19

subsystem-status-test (SST)

Full

1.20

unitdata (UDT)

Full

1.21

unitdata service (UDTS)

Full

1.22

extended unitdata (XUDT)

Full

1.23

extended unitdata service (XUDTS)

Full

1.24

subsystem congested (SSC)

Partial

Sending SSC is not implemented.

1.25

long unitdata (LUDT)

Partial

Sending LUDT is not implemented.

1.26

long unitdata service (LUDTS)

Partial

Sending LUDTS is not implemented.

SCCP message parameters

2.1

affected point code

Full

2.2

affected subsystem number

Full

2.3

calling/called party address

Full

2.4

credit

None

Parameter not supported.

2.5

data

Full

2.6

diagnostic

None

Parameter not supported.

2.7

error cause

None

Not compliant - see 1

2.8

end of optional parameters

Partial

Only XUDT supports encoding this parameter.

2.9

local reference number (source/destination)

None

Parameter not supported.

2.10

protocol class

Full

2.11

receive sequence number

None

Not compliant - see 1

2.12

refusal cause

None

Not compliant - see 1

2.13

release cause

None

Not compliant - see 1

2.14

reset cause

None

Not compliant - see 1

2.15

return cause

Full

2.16

segmenting/reassembling

None

Not compliant - see 1

2.17

sequencing/segmenting

None

Not compliant - see 1

2.18

subsystem multiplicity indicator

Full

2.19

hop counter

Partial

Parameter value is ignored.

2.20

segmentation

Full

2.21

importance

Partial

Parameter value is ignored.

2.22

congestion level

Partial

Encoding is not implemented.

2.23

long data

Partial

Encoding is not implemented.

Inclusion of fields in the messages

References

4.1

Normative references

4.2

Informative references

SCCP Q.713 - Formats and Codes

Empty cells are descriptive text only

	Description	Compliance	Notes
1	General
1.1	Message type code	Full
1.2	Formatting principles	Full
1.3	Mandatory fixed part	Full
1.4	Mandatory variable part	Full
1.5	Optional part	Full
1.6	End of optional parameters octet	Full
1.7	Order of transmission	Full
1.8	Coding of spare bits	Full
1.9	National message types and parameters	Full
1.1	International message types and parameters	Full
2	Coding of the general parts
2.1	Coding of the message type	Partial	Class 3 and class 4 messages are not supported.
2.2	Coding of the length indicator	Full
2.3	Coding of the pointers	Full
3	SCCP parameters	Partial	Only the parameters related to messages of class 0 and class 1 are supported.
3.1	End of optional parameters	Partial	Encoding is not implemented.
3.2	Destination local reference	None	Not compliant - see 3
3.3	Source local reference	None	Not compliant - see 3
3.4	Called party address	Full
3.4.1	Address indicator	Full
3.4.2	Address	Full
3.4.2.1	Signalling point code	Full
3.4.2.2	Subsystem number	Full
3.4.2.3	Global title	Full
3.4.2.3.1	Global title indicator = 0001	Full
3.4.2.3.2	Global title indicator = 0010	Full
3.4.2.3.3	Global title indicator = 0011	Full
3.4.2.3.4	Global title indicator = 0100	Full
3.5	Calling party address	Full
3.6	Protocol class	Full
3.7	Segmenting/reassembling	Partial	Encoding is not implemented.
3.8	Receive sequence number	None	Not compliant - see 3
3.9	Sequencing/segmenting	None	Not compliant - see 3
3.1	Credit	None	Not compliant - see 3
3.11	Release cause	None	Not compliant - see 3
3.12	Return cause	Full
3.13	Reset cause	None	Not compliant - see 3
3.14	Error cause	None	Not compliant - see 3
3.15	Refusal cause	None	Not compliant - see 3
3.16	Data	Full
3.17	Segmentation	Full
3.18	Hop counter	Full
3.19	Importance	Full
3.20	Long data	Partial	Encoding is not implemented.
4	SCCP messages and codes
4.1	General
4.1.1
4.1.2
4.1.3
4.1.4
4.2	Connection request (CR)	None	Not compliant - see 3
4.3	Connection confirm (CC)	None	Not compliant - see 3
4.4	Connection refused (CREF)	None	Not compliant - see 3
4.5	Released (RLSD)	None	Not compliant - see 3
4.6	Release complete (RLC)	None	Not compliant - see 3
4.7	Data form 1 (DT1)	None	Not compliant - see 3
4.8	Data form 2 (DT2)	None	Not compliant - see 3
4.9	Data acknowledgement (AK)	None	Not compliant - see 3
4.1	Unitdata (UDT)	Full
4.11	Unitdata service (UDTS)	Full
4.12	Expedited data (ED)	None	Not compliant - see 2.1
4.13	Expedited data acknowledgement (EA)	None	Not compliant - see 2.1
4.14	Reset request (RSR)	None	Not compliant - see 2.1
4.15	Reset confirmation (RSC)	None	Not compliant - see 2.1
4.16	Protocol data unit error (ERR)	None	Not compliant - see 2.1
4.17	Inactivity test (IT)	None	Not compliant - see 2.1
4.18	Extended unitdata (XUDT)	Full
4.19	Extended unitdata service (XUDTS)	Full
4.20	Long unitdata (LUDT)	Partial	Encoding is not implemented.
4.21	Long unitdata service (LUDTS)	Partial	Encoding is not implemented.
5	SCCP Management messages and codes
5.1	General	Full
5.1.1	SCMG format identifier	Full
5.1.2	Formatting principles	Full
5.2	SCMG message parameters
5.2.1	Affected SSN	Full
5.2.2	Affected PC	Full
5.2.3	Subsystem multiplicity indicator	Full	Encoding is not implemented.
5.2.4	SCCP congestion level	Full	Encoding is not implemented.
5.3	SCMG Messages	Partial	SOR and SOG are not supported.
6	References
6.1	Normative references
6.2	Informative references
A.1	Introduction	None	Not compliant - see 3
A.2	Connection refusal	None	Not compliant - see 3
A.3	Connection release	None	Not compliant - see 3
A.4	Connection reset	None	Not compliant - see 3
A.5	Return cause	Full

Description

Compliance

Notes

General

1.1

Message type code

Full

1.2

Formatting principles

Full

1.3

Mandatory fixed part

Full

1.4

Mandatory variable part

Full

1.5

Optional part

Full

1.6

End of optional parameters octet

Full

1.7

Order of transmission

Full

1.8

Coding of spare bits

Full

1.9

National message types and parameters

Full

1.1

International message types and parameters

Full

Coding of the general parts

2.1

Coding of the message type

Partial

Class 3 and class 4 messages are not supported.

2.2

Coding of the length indicator

Full

2.3

Coding of the pointers

Full

SCCP parameters

Partial

Only the parameters related to messages of class 0 and class 1 are supported.

3.1

End of optional parameters

Partial

Encoding is not implemented.

3.2

Destination local reference

None

Not compliant - see 3

3.3

Source local reference

None

Not compliant - see 3

3.4

Called party address

Full

3.4.1

Address indicator

Full

3.4.2

Address

Full

3.4.2.1

Signalling point code

Full

3.4.2.2

Subsystem number

Full

3.4.2.3

Global title

Full

3.4.2.3.1

Global title indicator = 0001

Full

3.4.2.3.2

Global title indicator = 0010

Full

3.4.2.3.3

Global title indicator = 0011

Full

3.4.2.3.4

Global title indicator = 0100

Full

3.5

Calling party address

Full

3.6

Protocol class

Full

3.7

Segmenting/reassembling

Partial

Encoding is not implemented.

3.8

Receive sequence number

None

Not compliant - see 3

3.9

Sequencing/segmenting

None

Not compliant - see 3

3.1

Credit

None

Not compliant - see 3

3.11

Release cause

None

Not compliant - see 3

3.12

Return cause

Full

3.13

Reset cause

None

Not compliant - see 3

3.14

Error cause

None

Not compliant - see 3

3.15

Refusal cause

None

Not compliant - see 3

3.16

Data

Full

3.17

Segmentation

Full

3.18

Hop counter

Full

3.19

Importance

Full

3.20

Long data

Partial

Encoding is not implemented.

SCCP messages and codes

4.1

General

4.1.1

4.1.2

4.1.3

4.1.4

4.2

Connection request (CR)

None

Not compliant - see 3

4.3

Connection confirm (CC)

None

Not compliant - see 3

4.4

Connection refused (CREF)

None

Not compliant - see 3

4.5

Released (RLSD)

None

Not compliant - see 3

4.6

Release complete (RLC)

None

Not compliant - see 3

4.7

Data form 1 (DT1)

None

Not compliant - see 3

4.8

Data form 2 (DT2)

None

Not compliant - see 3

4.9

Data acknowledgement (AK)

None

Not compliant - see 3

4.1

Unitdata (UDT)

Full

4.11

Unitdata service (UDTS)

Full

4.12

Expedited data (ED)

None

Not compliant - see 2.1

4.13

Expedited data acknowledgement (EA)

None

Not compliant - see 2.1

4.14

Reset request (RSR)

None

Not compliant - see 2.1

4.15

Reset confirmation (RSC)

None

Not compliant - see 2.1

4.16

Protocol data unit error (ERR)

None

Not compliant - see 2.1

4.17

Inactivity test (IT)

None

Not compliant - see 2.1

4.18

Extended unitdata (XUDT)

Full

4.19

Extended unitdata service (XUDTS)

Full

4.20

Long unitdata (LUDT)

Partial

Encoding is not implemented.

4.21

Long unitdata service (LUDTS)

Partial

Encoding is not implemented.

SCCP Management messages and codes

5.1

General

Full

5.1.1

SCMG format identifier

Full

5.1.2

Formatting principles

Full

5.2

SCMG message parameters

5.2.1

Affected SSN

Full

5.2.2

Affected PC

Full

5.2.3

Subsystem multiplicity indicator

Full

Encoding is not implemented.

5.2.4

SCCP congestion level

Full

Encoding is not implemented.

5.3

SCMG Messages

Partial

SOR and SOG are not supported.

References

6.1

Normative references

6.2

Informative references

A.1

Introduction

None

Not compliant - see 3

A.2

Connection refusal

None

Not compliant - see 3

A.3

Connection release

None

Not compliant - see 3

A.4

Connection reset

None

Not compliant - see 3

A.5

Return cause

Full

SCCP Q.714 - Procedures

Empty cells are descriptive text only

	Description	Compliance	Notes
1	Introduction
1.1	General characteristics of signalling connection control procedures
1.1.1	Purpose
1.1.2	Protocol classes	Partial	Connection-oriented services are not implemented.
1.1.2.1	Protocol class 0	Full
1.1.2.2	Protocol class 1	Full
1.1.2.3	Protocol class 2	None	Connection-oriented services are not implemented.
1.1.2.4	Protocol class 3	None	Connection-oriented services are not implemented.
1.1.3	Signalling connections	Full
1.1.4	Compatibility and handling of unrecognized information
1.1.4.1	Rules for compatibility	Full
1.1.4.2	Handling of unrecognized messages or parameters	Full
1.1.4.3	Handling of non-mandatory unsupported parameter values	Full
1.1.4.4	Treatment of spare fields	Full
1.1.4.5	Handling of gaps	Full
1.2	Overview of procedures for connection-oriented services
1.2.1	Connection establishment	None	Connection-oriented services are not implemented.
1.2.2	Data transfer	None	Connection-oriented services are not implemented.
1.2.3	Connection release	None	Connection-oriented services are not implemented.
1.3	Overview of procedures for connectionless services
1.3.1	General	Partial	Acting as a relay node is not supported.
1.3.2	Segmentation/reassembly	Full
1.4	Structure of the SCCP and contents of this Recommendation	Partial	Connection-oriented control is not implemented.
2	Addressing and routing
2.1	SCCP addressing principles	Full
2.2	SCCP routing principles	Full
2.2.1	Receipt of SCCP message transferred by the MTP	Full
2.2.2	Messages passed from connection-oriented or connectionless control to SCCP routing control	Full
2.2.2.1	DPC present	Full
2.2.2.2	DPC not present	Full
2.3	SCCP routing procedures
2.3.1	Receipt of SCCP messages transferred by the MTP	Partial	Connection-oriented services are not implemented.
2.3.2	Messages from connectionless or connection-oriented control to SCCP routing control	Partial	Connection-oriented control is not implemented.
2.4	Global title translation
2.4.1	General characteristics of the GTT	Full
2.4.2	Terminology definitions
2.4.2.1	GT information	Full
2.4.2.2	Other definitions used in the GTT function	Full
2.4.3	Input of the GTT function	Full
2.4.3.1	Local information (mandatory input)	Full
2.4.3.2	GT information (mandatory input)	Full
2.4.3.3	SSN (mandatory input if present)	Full
2.4.3.4	Loadsharing information	Full
2.4.4	Output of the GTT function	Full
2.4.5	Global title translation function	Full
2.5	Compatibility test	Partial	Sending of LUDT/LUDTS messages is not supported.
2.6	Traffic limitation mechanism	Full
2.6.1	General	Full
2.6.2	Importance of a message	Partial	Acting as a relay node is not supported.
2.6.3	Handling of messages to a congested node	Full
2.7	Calling party address treatment
2.7.1	Address indicator	Full
2.7.2	Calling party address in the international network	None	For further study.
2.7.3	Routing indicator	Full
2.7.4	Screening	None	Screening is not supported
2.7.5	Inclusion of OPC in the calling party address	Full
2.7.5.1	LUDT or FullUDT or UDT message	Full
2.7.5.2	CR message	None	Connection-oriented services are not implemented.
2.8	Routing failures	Partial	Connection-oriented services are not implemented.
2.8.1	No translation for an address of such nature	Full
2.8.2	No translation for this specific address	Full
2.8.3	MTP/SCCP/subsystem failure	Full
2.8.4	MTP/SCCP/subsystem congestion	Partial	Only as N-NOTICE.
2.8.5	Unequipped user	Full
2.8.6	Hop counter violation	None	Hop counting is not supported
3	Connection-oriented procedures		Connection-oriented procedures are not supported
3.1	Connection establishment
3.1.1	General	None	Not supported - see 3
3.1.2	Local reference numbers	None	Not supported - see 3
3.1.3	Negotiation procedures
3.1.3.1	Protocol class negotiation	None	Not supported - see 3
3.1.3.2	Flow control credit negotiation	None	Not supported - see 3
3.1.4	Actions at the originating node
3.1.4.1	Initial actions	None	Not supported - see 3
3.1.4.2	Subsequent actions	None	Not supported - see 3
3.1.5	Actions at a relay node with coupling
3.1.5.1	Initial actions	None	Not supported - see 3
3.1.5.2	Subsequent actions	None	Not supported - see 3
3.1.6	Actions at the destination node
3.1.6.1	Initial actions	None	Not supported - see 3
3.1.6.2	Subsequent actions	None	Not supported - see 3
3.2	Connection refusal	None	Not supported - see 3
3.2.1	Actions at node initiating connection refusal	None	Not supported - see 3
3.2.1.1	Initiating connection refusal at the destination node	None	Not supported - see 3
3.2.1.2	Initiating connection refusal at a relay node	None	Not supported - see 3
3.2.1.3	Initiating connection refusal at the originating node	None	Not supported - see 3
3.2.2	Actions at a relay node not initiating connection refusal	None	Not supported - see 3
3.2.3	Actions at the originating node not initiating connection refusal	None	Not supported - see 3
3.3	Connection release
3.3.1	General	None	Not supported - see 3
3.3.2	Frozen reference	None	Not supported - see 3
3.3.3	Actions at an end node initiating connection release
3.3.3.1	Initial actions	None	Not supported - see 3
3.3.3.2	Subsequent actions	None	Not supported - see 3
3.3.4	Actions at a relay node	None	Not supported - see 3
3.3.4.1	Initial actions	None	Not supported - see 3
3.3.4.2	Subsequent actions	None	Not supported - see 3
3.3.5	Actions at an end node not initiating connection release	None	Not supported - see 3
3.4	Inactivity control	None	Not supported - see 3
3.5	Data transfer
3.5.1	General	None	Not supported - see 3
3.5.1.1	Actions at the originating node	None	Not supported - see 3
3.5.1.2	Actions at a relay node	None	Not supported - see 3
3.5.1.3	Actions at the destination node	None	Not supported - see 3
3.5.2	Flow control
3.5.2.1	General	None	Not supported - see 3
3.5.2.2	Sequence numbering	None	Not supported - see 3
3.5.2.3	Flow control window	None	Not supported - see 3
3.5.2.4	Flow control procedures
3.5.2.4.1	Transfer of DT2 messages	None	Not supported - see 3
3.5.2.4.2	Transfer of AK messages	None	Not supported - see 3
3.5.2.4.3	Reception of a Data or AK message	None	Not supported - see 3
3.5.3	Segmenting and reassembly	None	Not supported - see 3
3.6	Expedited data transfer
3.6.1	General	None	Not supported - see 3
3.6.2	Actions at the originating node	None	Not supported - see 3
3.6.3	Actions at a relay node	None	Not supported - see 3
3.6.4	Actions at the destination node	None	Not supported - see 3
3.7	Reset
3.7.1	General	None	Not supported - see 3
3.7.2	Action at an end node initiating the reset procedure
3.7.2.1	Initial actions	None	Not supported - see 3
3.7.2.2	Subsequent actions	None	Not supported - see 3
3.7.3	Actions at a relay node
3.7.3.1	Initial actions	None	Not supported - see 3
3.7.3.2	Subsequent actions	None	Not supported - see 3
3.7.4	Actions at an end node not initiating the reset procedure	None	Not supported - see 3
3.7.5	Handling of messages during the reset procedures	None	Not supported - see 3
3.8	Restart
3.8.1	General	None	Not supported - see 3
3.8.2	Actions at the recovered node
3.8.2.1	Initial actions	None	Not supported - see 3
3.8.2.2	Subsequent actions	None	Not supported - see 3
3.8.3	Actions at the non-failed far end node	None	Not supported - see 3
3.8.3.1	Permanent signalling connections	None	Not supported - see 3
3.8.3.2	Abnormalities
3.8.3.3	General	None	Not supported - see 3
3.8.4	Syntax error	None	Not supported - see 3
3.8.5	Action tables	None	Not supported - see 3
3.8.6	Actions upon the reception of an ERR message	None	Not supported - see 3
4	Connectionless procedures	Full	Relax usage of LUDT/LUDTS messages.
4.1	Data transfer	Partial	Only UDT, UDTS, XUDT and XUDTS messages are sent.
4.1.1	Segmentation/reassembly
4.1.1.1	Segmentation
4.1.1.1.1	General	Full
4.1.1.1.2	Normal procedures	Partial	LUDT is not supported.
4.1.1.1.3	Message return procedure	Partial	LUDT and LUDTS are not supported.
4.1.1.1.3.1	Segmentation not supported.	Full
4.1.1.1.3.2	Segmentation failed	None	LUDT is not supported.
4.1.1.2	Reassembly
4.1.1.2.1	General	Partial	LUDT is not supported.
4.1.1.2.2	Normal procedures	Partial	LUDT is not supported.
4.1.1.2.3	Message return procedure	Partial	LUDT is not supported.
4.1.1.2.3.1	Destination cannot perform reassembly	Full
4.1.1.2.3.2	Error in message transport	Full
4.1.1.2.3.3	Error in local processing	Full
4.1.1.2.3.4	No buffer space to perform reassembly	Full
4.1.2	Message change	Partial	Only LUDTS in UDTS.
4.2	Message return procedure	Full
4.3	Syntax error	Full
5	SCCP management procedures
5.1	General	Full
5.2	Signalling point status management
5.2.1	General	Full
5.2.2	Signalling point prohibited	Full
5.2.3	Signalling point allowed	Full
5.2.4	Signalling point congested	Full
5.2.5	Local MTP network availability	Full
5.2.6	Local MTP network unavailability	None	MTP restart procedure not supported
5.2.7	SCCP reports of SCCP and nodal congestion	Full
5.2.7.1	Actions in the congested SCCP node	None	SSC message sending is not supported
5.2.7.2	Action in a relay or originating node	Full
5.2.8	Inter- and Intra- SCMG congestion reports procedure	Full
5.3	Subsystem status management
5.3.1	General	Full
5.3.2	Subsystem prohibited	Full
5.3.2.1	Receipt of messages for a prohibited subsystem (response method)	Full
5.3.2.2	Receipt of Subsystem-Prohibited message or N-STATE request primitive or local user failed	Partial	N-STATE not supported.
5.3.3	Subsystem allowed	Partial	N-STATE not supported.
5.3.4	Subsystem status test
5.3.4.1	General
5.3.4.2	Actions at the initiating node	Full
5.3.4.3	Actions at the receiving node	Full
5.3.5	Coordinated state change		Not supported.
5.3.5.1	General	None	Not compliant. Procedure is not supported
5.3.5.2	Actions at the requesting node	None	Not compliant - see 5.3.5.1
5.3.5.3	Actions at the requested node	None	Not compliant - see 5.3.5.1
5.3.6	Local broadcast
5.3.6.1	General	None	Not compliant. Procedure is not supported
5.3.6.2	User-out-of-service	None	Not compliant - see 5.3.6.1
5.3.6.3	User-in-service	None	Not compliant - see 5.3.6.1
5.3.6.4	Signalling point inaccessible	None	Not compliant - see 5.3.6.1
5.3.6.5	Signalling point or remote SCCP accessible	None	Not compliant - see 5.3.6.1
5.3.6.6	Restricted importance level reporting	None	Not compliant - see 5.3.6.1
5.3.7	Broadcast
5.3.7.1	General	Full
5.3.7.2	Subsystem prohibited	Partial	Only for local subsystem.
5.3.7.3	Subsystem allowed	Partial	Only for local subsystem.
5.4	MTP/SCMG restart	Full

Description

Compliance

Notes

Introduction

1.1

General characteristics of signalling connection control procedures

1.1.1

Purpose

1.1.2

Protocol classes

Partial

Connection-oriented services are not implemented.

1.1.2.1

Protocol class 0

Full

1.1.2.2

Protocol class 1

Full

1.1.2.3

Protocol class 2

None

Connection-oriented services are not implemented.

1.1.2.4

Protocol class 3

None

Connection-oriented services are not implemented.

1.1.3

Signalling connections

Full

1.1.4

Compatibility and handling of unrecognized information

1.1.4.1

Rules for compatibility

Full

1.1.4.2

Handling of unrecognized messages or parameters

Full

1.1.4.3

Handling of non-mandatory unsupported parameter values

Full

1.1.4.4

Treatment of spare fields

Full

1.1.4.5

Handling of gaps

Full

1.2

Overview of procedures for connection-oriented services

1.2.1

Connection establishment

None

Connection-oriented services are not implemented.

1.2.2

Data transfer

None

Connection-oriented services are not implemented.

1.2.3

Connection release

None

Connection-oriented services are not implemented.

1.3

Overview of procedures for connectionless services

1.3.1

General

Partial

Acting as a relay node is not supported.

1.3.2

Segmentation/reassembly

Full

1.4

Structure of the SCCP and contents of this Recommendation

Partial

Connection-oriented control is not implemented.

Addressing and routing

2.1

SCCP addressing principles

Full

2.2

SCCP routing principles

Full

2.2.1

Receipt of SCCP message transferred by the MTP

Full

2.2.2

Messages passed from connection-oriented or connectionless control to SCCP routing control

Full

2.2.2.1

DPC present

Full

2.2.2.2

DPC not present

Full

2.3

SCCP routing procedures

2.3.1

Receipt of SCCP messages transferred by the MTP

Partial

Connection-oriented services are not implemented.

2.3.2

Messages from connectionless or connection-oriented control to SCCP routing control

Partial

Connection-oriented control is not implemented.

2.4

Global title translation

2.4.1

General characteristics of the GTT

Full

2.4.2

Terminology definitions

2.4.2.1

GT information

Full

2.4.2.2

Other definitions used in the GTT function

Full

2.4.3

Input of the GTT function

Full

2.4.3.1

Local information (mandatory input)

Full

2.4.3.2

GT information (mandatory input)

Full

2.4.3.3

SSN (mandatory input if present)

Full

2.4.3.4

Loadsharing information

Full

2.4.4

Output of the GTT function

Full

2.4.5

Global title translation function

Full

2.5

Compatibility test

Partial

Sending of LUDT/LUDTS messages is not supported.

2.6

Traffic limitation mechanism

Full

2.6.1

General

Full

2.6.2

Importance of a message

Partial

Acting as a relay node is not supported.

2.6.3

Handling of messages to a congested node

Full

2.7

Calling party address treatment

2.7.1

Address indicator

Full

2.7.2

Calling party address in the international network

None

For further study.

2.7.3

Routing indicator

Full

2.7.4

Screening

None

Screening is not supported

2.7.5

Inclusion of OPC in the calling party address

Full

2.7.5.1

LUDT or FullUDT or UDT message

Full

2.7.5.2

CR message

None

Connection-oriented services are not implemented.

2.8

Routing failures

Partial

Connection-oriented services are not implemented.

2.8.1

No translation for an address of such nature

Full

2.8.2

No translation for this specific address

Full

2.8.3

MTP/SCCP/subsystem failure

Full

2.8.4

MTP/SCCP/subsystem congestion

Partial

Only as N-NOTICE.

2.8.5

Unequipped user

Full

2.8.6

Hop counter violation

None

Hop counting is not supported

Connection-oriented procedures

Connection-oriented procedures are not supported

3.1

Connection establishment

3.1.1

General

None

Not supported - see 3

3.1.2

Local reference numbers

None

Not supported - see 3

3.1.3

Negotiation procedures

3.1.3.1

Protocol class negotiation

None

Not supported - see 3

3.1.3.2

Flow control credit negotiation

None

Not supported - see 3

3.1.4

Actions at the originating node

3.1.4.1

Initial actions

None

Not supported - see 3

3.1.4.2

Subsequent actions

None

Not supported - see 3

3.1.5

Actions at a relay node with coupling

3.1.5.1

Initial actions

None

Not supported - see 3

3.1.5.2

Subsequent actions

None

Not supported - see 3

3.1.6

Actions at the destination node

3.1.6.1

Initial actions

None

Not supported - see 3

3.1.6.2

Subsequent actions

None

Not supported - see 3

3.2

Connection refusal

None

Not supported - see 3

3.2.1

Actions at node initiating connection refusal

None

Not supported - see 3

3.2.1.1

Initiating connection refusal at the destination node

None

Not supported - see 3

3.2.1.2

Initiating connection refusal at a relay node

None

Not supported - see 3

3.2.1.3

Initiating connection refusal at the originating node

None

Not supported - see 3

3.2.2

Actions at a relay node not initiating connection refusal

None

Not supported - see 3

3.2.3

Actions at the originating node not initiating connection refusal

None

Not supported - see 3

3.3

Connection release

3.3.1

General

None

Not supported - see 3

3.3.2

Frozen reference

None

Not supported - see 3

3.3.3

Actions at an end node initiating connection release

3.3.3.1

Initial actions

None

Not supported - see 3

3.3.3.2

Subsequent actions

None

Not supported - see 3

3.3.4

Actions at a relay node

None

Not supported - see 3

3.3.4.1

Initial actions

None

Not supported - see 3

3.3.4.2

Subsequent actions

None

Not supported - see 3

3.3.5

Actions at an end node not initiating connection release

None

Not supported - see 3

3.4

Inactivity control

None

Not supported - see 3

3.5

Data transfer

3.5.1

General

None

Not supported - see 3

3.5.1.1

Actions at the originating node

None

Not supported - see 3

3.5.1.2

Actions at a relay node

None

Not supported - see 3

3.5.1.3

Actions at the destination node

None

Not supported - see 3

3.5.2

Flow control

3.5.2.1

General

None

Not supported - see 3

3.5.2.2

Sequence numbering

None

Not supported - see 3

3.5.2.3

Flow control window

None

Not supported - see 3

3.5.2.4

Flow control procedures

3.5.2.4.1

Transfer of DT2 messages

None

Not supported - see 3

3.5.2.4.2

Transfer of AK messages

None

Not supported - see 3

3.5.2.4.3

Reception of a Data or AK message

None

Not supported - see 3

3.5.3

Segmenting and reassembly

None

Not supported - see 3

3.6

Expedited data transfer

3.6.1

General

None

Not supported - see 3

3.6.2

Actions at the originating node

None

Not supported - see 3

3.6.3

Actions at a relay node

None

Not supported - see 3

3.6.4

Actions at the destination node

None

Not supported - see 3

3.7

Reset

3.7.1

General

None

Not supported - see 3

3.7.2

Action at an end node initiating the reset procedure

3.7.2.1

Initial actions

None

Not supported - see 3

3.7.2.2

Subsequent actions

None

Not supported - see 3

3.7.3

Actions at a relay node

3.7.3.1

Initial actions

None

Not supported - see 3

3.7.3.2

Subsequent actions

None

Not supported - see 3

3.7.4

Actions at an end node not initiating the reset procedure

None

Not supported - see 3

3.7.5

Handling of messages during the reset procedures

None

Not supported - see 3

3.8

Restart

3.8.1

General

None

Not supported - see 3

3.8.2

Actions at the recovered node

3.8.2.1

Initial actions

None

Not supported - see 3

3.8.2.2

Subsequent actions

None

Not supported - see 3

3.8.3

Actions at the non-failed far end node

None

Not supported - see 3

3.8.3.1

Permanent signalling connections

None

Not supported - see 3

3.8.3.2

Abnormalities

3.8.3.3

General

None

Not supported - see 3

3.8.4

Syntax error

None

Not supported - see 3

3.8.5

Action tables

None

Not supported - see 3

3.8.6

Actions upon the reception of an ERR message

None

Not supported - see 3

Connectionless procedures

Full

Relax usage of LUDT/LUDTS messages.

4.1

Data transfer

Partial

Only UDT, UDTS, XUDT and XUDTS messages are sent.

4.1.1

Segmentation/reassembly

4.1.1.1

Segmentation

4.1.1.1.1

General

Full

4.1.1.1.2

Normal procedures

Partial

LUDT is not supported.

4.1.1.1.3

Message return procedure

Partial

LUDT and LUDTS are not supported.

4.1.1.1.3.1

Segmentation not supported.

Full

4.1.1.1.3.2

Segmentation failed

None

LUDT is not supported.

4.1.1.2

Reassembly

4.1.1.2.1

General

Partial

LUDT is not supported.

4.1.1.2.2

Normal procedures

Partial

LUDT is not supported.

4.1.1.2.3

Message return procedure

Partial

LUDT is not supported.

4.1.1.2.3.1

Destination cannot perform reassembly

Full

4.1.1.2.3.2

Error in message transport

Full

4.1.1.2.3.3

Error in local processing

Full

4.1.1.2.3.4

No buffer space to perform reassembly

Full

4.1.2

Message change

Partial

Only LUDTS in UDTS.

4.2

Message return procedure

Full

4.3

Syntax error

Full

SCCP management procedures

5.1

General

Full

5.2

Signalling point status management

5.2.1

General

Full

5.2.2

Signalling point prohibited

Full

5.2.3

Signalling point allowed

Full

5.2.4

Signalling point congested

Full

5.2.5

Local MTP network availability

Full

5.2.6

Local MTP network unavailability

None

MTP restart procedure not supported

5.2.7

SCCP reports of SCCP and nodal congestion

Full

5.2.7.1

Actions in the congested SCCP node

None

SSC message sending is not supported

5.2.7.2

Action in a relay or originating node

Full

5.2.8

Inter- and Intra- SCMG congestion reports procedure

Full

5.3

Subsystem status management

5.3.1

General

Full

5.3.2

Subsystem prohibited

Full

5.3.2.1

Receipt of messages for a prohibited subsystem (response method)

Full

5.3.2.2

Receipt of Subsystem-Prohibited message or N-STATE request primitive or local user failed

Partial

N-STATE not supported.

5.3.3

Subsystem allowed

Partial

N-STATE not supported.

5.3.4

Subsystem status test

5.3.4.1

General

5.3.4.2

Actions at the initiating node

Full

5.3.4.3

Actions at the receiving node

Full

5.3.5

Coordinated state change

Not supported.

5.3.5.1

General

None

Not compliant. Procedure is not supported

5.3.5.2

Actions at the requesting node

None

Not compliant - see 5.3.5.1

5.3.5.3

Actions at the requested node

None

Not compliant - see 5.3.5.1

5.3.6

Local broadcast

5.3.6.1

General

None

Not compliant. Procedure is not supported

5.3.6.2

User-out-of-service

None

Not compliant - see 5.3.6.1

5.3.6.3

User-in-service

None

Not compliant - see 5.3.6.1

5.3.6.4

Signalling point inaccessible

None

Not compliant - see 5.3.6.1

5.3.6.5

Signalling point or remote SCCP accessible

None

Not compliant - see 5.3.6.1

5.3.6.6

Restricted importance level reporting

None

Not compliant - see 5.3.6.1

5.3.7

Broadcast

5.3.7.1

General

Full

5.3.7.2

Subsystem prohibited

Partial

Only for local subsystem.

5.3.7.3

Subsystem allowed

Partial

Only for local subsystem.

5.4

MTP/SCMG restart

Full

TCAP Q.771 - Functional Description

Empty cells are descriptive text only

	Description	Compliance	Notes
1	Introduction
1.1	General
1.2	Contents of the Q.771/Q.775-Series Recommendations
1.3	Objectives
1.3.1	Definition of Transaction Capabilities
1.3.2	Scope of Transaction Capabilities
2	Overview
2.1	Terminology
2.2	Structure of TC
2.2.1	Architectural concept
2.2.2	Addressing issues	Full
2.2.3	Management aspects	Full
2.2.4	Alignment of TCAP with Recommendations X.219 and X.229 (ROSE)
2.2.5	Alignment of TCAP with Recommendations X.217 and X.227 (ACSE)
2.3	TC based on a connectionless network service
2.3.1	Service provided by the Component sublayer
2.3.1.1	Component	Full
2.3.1.2	Dialogue	Full
2.3.1.2.1	Unstructured dialogue	Full
2.3.1.2.2	Structured dialogue	Full
2.3.1.3	Component correlation	Full
2.3.1.4	Error Handling	Full
2.3.2	Service provided by the Transaction sublayer	Full
2.3.2.1	Unstructured dialogue	Full
2.3.2.2	Structured dialogue	Full
3	Service provided by TC based on a connectionless network service
3.1	Component sublayer
3.1.1	Overview of Component sublayer primitives	Partial	TC-TIMER-RESET is not supported.
3.1.2	Dialogue handling	Full
3.1.2.1	Definition of parameters	Full
3.1.2.2	Dialogue facilities	Full
3.1.2.2.1	Unstructured dialogue	Full
3.1.2.2.2	Structured dialogue	Full
3.1.2.2.2.1	Beginning of a dialogue	Full
3.1.2.2.2.2	Confirmation of the dialogue	Full
3.1.2.2.2.3	Continuation of the dialogue	Full
3.1.2.2.2.4	End of the dialogue	Full
3.1.3	Component handling
3.1.3.1	Definitions of parameters
3.1.3.2	Operation invocation	Full
3.1.3.3	Report of success	Full
3.1.3.4	Report of failure	Full
3.1.3.5	Reject by the TC-user	Full
3.1.3.6	Cancel of an operations	Full
3.1.3.7	Reset of an operation invocation	None	Not compliant - see 3.1.1
3.1.3.8	Grouping of components inside a Message	Full
3.1.4	Abnormal situations
3.1.4.1	Reject of a component by the component sub-layer	Partial	Total length of the components to be sent cannot exceed the message size limitation imposed by the underlying layer (SCCP).
3.1.4.2	Dialogue abort	Full
3.1.5	Component states and state transition diagrams	Full
3.1.6	Mapping of Component sublayer onto Transaction sublayer	Full
3.2	Transaction sublayer
3.2.1	Overview of the Transaction sublayer primitives	Full
3.2.2	Information transfer in unstructured dialogue	Full
3.2.3	Transaction begin	Full
3.2.4	Transaction continuation	Full
3.2.5	Transaction end	Full
3.2.6	Abnormal situations
3.2.6.1	Abort by the Transaction sublayer	Full
3.2.7	Exception reporting and message return	Full
3.3	Services assumed from the connectionless network layer	Full

Description

Compliance

Notes

Introduction

1.1

General

1.2

Contents of the Q.771/Q.775-Series Recommendations

1.3

Objectives

1.3.1

Definition of Transaction Capabilities

1.3.2

Scope of Transaction Capabilities

Overview

2.1

Terminology

2.2

Structure of TC

2.2.1

Architectural concept

2.2.2

Addressing issues

Full

2.2.3

Management aspects

Full

2.2.4

Alignment of TCAP with Recommendations X.219 and X.229 (ROSE)

2.2.5

Alignment of TCAP with Recommendations X.217 and X.227 (ACSE)

2.3

TC based on a connectionless network service

2.3.1

Service provided by the Component sublayer

2.3.1.1

Component

Full

2.3.1.2

Dialogue

Full

2.3.1.2.1

Unstructured dialogue

Full

2.3.1.2.2

Structured dialogue

Full

2.3.1.3

Component correlation

Full

2.3.1.4

Error Handling

Full

2.3.2

Service provided by the Transaction sublayer

Full

2.3.2.1

Unstructured dialogue

Full

2.3.2.2

Structured dialogue

Full

Service provided by TC based on a connectionless network service

3.1

Component sublayer

3.1.1

Overview of Component sublayer primitives

Partial

TC-TIMER-RESET is not supported.

3.1.2

Dialogue handling

Full

3.1.2.1

Definition of parameters

Full

3.1.2.2

Dialogue facilities

Full

3.1.2.2.1

Unstructured dialogue

Full

3.1.2.2.2

Structured dialogue

Full

3.1.2.2.2.1

Beginning of a dialogue

Full

3.1.2.2.2.2

Confirmation of the dialogue

Full

3.1.2.2.2.3

Continuation of the dialogue

Full

3.1.2.2.2.4

End of the dialogue

Full

3.1.3

Component handling

3.1.3.1

Definitions of parameters

3.1.3.2

Operation invocation

Full

3.1.3.3

Report of success

Full

3.1.3.4

Report of failure

Full

3.1.3.5

Reject by the TC-user

Full

3.1.3.6

Cancel of an operations

Full

3.1.3.7

Reset of an operation invocation

None

Not compliant - see 3.1.1

3.1.3.8

Grouping of components inside a Message

Full

3.1.4

Abnormal situations

3.1.4.1

Reject of a component by the component sub-layer

Partial

Total length of the components to be sent cannot exceed the message size limitation imposed by the underlying layer (SCCP).

3.1.4.2

Dialogue abort

Full

3.1.5

Component states and state transition diagrams

Full

3.1.6

Mapping of Component sublayer onto Transaction sublayer

Full

3.2

Transaction sublayer

3.2.1

Overview of the Transaction sublayer primitives

Full

3.2.2

Information transfer in unstructured dialogue

Full

3.2.3

Transaction begin

Full

3.2.4

Transaction continuation

Full

3.2.5

Transaction end

Full

3.2.6

Abnormal situations

3.2.6.1

Abort by the Transaction sublayer

Full

3.2.7

Exception reporting and message return

Full

3.3

Services assumed from the connectionless network layer

Full

TCAP Q.772 - Transactions Capabilities Information Element Definitions

Empty cells are descriptive text only

	Description	Compliance
1	General
2	Transaction portion
2.1	Message type
2.1.1	unidirectional	Full
2.1.2	begin	Full
2.1.3	end	Full
2.1.4	continue	Full
2.1.5	abort	Full
2.2	Transaction IDs
2.2.1	originating transaction ID	Full
2.2.2	destination transaction ID	Full
2.3	P-abort cause	Full
2.3.1	unrecognized message type	Full
2.3.2	unrecognized transaction ID	Full
2.3.3	badly formatted transaction portion	Full
2.3.4	incorrect transaction portion	Full
2.3.5	resource limitation	Full
2.4	dialogue portion	Full
2.5	component portion	Full
3	Component Portion
3.1	Component type	Full
3.1.1	invoke	Full
3.1.2	return result (not last)	Full
3.1.3	return result (last)	Full
3.1.4	return error	Full
3.1.5	reject	Full
3.2	invoke ID	Full
3.3	linked ID	Full
3.4	operation code	Full
3.5	parameter	Full
3.6	error code	Full
3.7	problem code	Full
3.7.1	general problem	Full
3.7.2	invoke problem	Full
3.7.3	return result problem	Full
3.7.4	return error problem	Full
4.1	Dialogue Control APDUs
4.1.1	Dialogue Request (AARQ) APDU	Full
4.1.2	Dialogue Response (AARE) APDU	Full
4.1.3	Dialogue Abort (ABRT) APDU	Full
4.1.4	Dialogue Uni (AUDT) APDU
4.2.1	application context name	Full
4.2.2	protocol version	Full
4.2.3	user information	Full
4.2.4	result	Full
4.2.5	result resource diagnostic	Full
4.2.6	abort source	Full

Description

Compliance

Notes

General

Transaction portion

2.1

Message type

2.1.1

unidirectional

Full

2.1.2

begin

Full

2.1.3

end

Full

2.1.4

continue

Full

2.1.5

abort

Full

2.2

Transaction IDs

2.2.1

originating transaction ID

Full

2.2.2

destination transaction ID

Full

2.3

P-abort cause

Full

2.3.1

unrecognized message type

Full

2.3.2

unrecognized transaction ID

Full

2.3.3

badly formatted transaction portion

Full

2.3.4

incorrect transaction portion

Full

2.3.5

resource limitation

Full

2.4

dialogue portion

Full

2.5

component portion

Full

Component Portion

3.1

Component type

Full

3.1.1

invoke

Full

3.1.2

return result (not last)

Full

3.1.3

return result (last)

Full

3.1.4

return error

Full

3.1.5

reject

Full

3.2

invoke ID

Full

3.3

linked ID

Full

3.4

operation code

Full

3.5

parameter

Full

3.6

error code

Full

3.7

problem code

Full

3.7.1

general problem

Full

3.7.2

invoke problem

Full

3.7.3

return result problem

Full

3.7.4

return error problem

Full

4.1

Dialogue Control APDUs

4.1.1

Dialogue Request (AARQ) APDU

Full

4.1.2

Dialogue Response (AARE) APDU

Full

4.1.3

Dialogue Abort (ABRT) APDU

Full

4.1.4

Dialogue Uni (AUDT) APDU

4.2.1

application context name

Full

4.2.2

protocol version

Full

4.2.3

user information

Full

4.2.4

result

Full

4.2.5

result resource diagnostic

Full

4.2.6

abort source

Full

TCAP Q.773 - Transactions Capabilities Formats and Encoding

Empty cells are descriptive text only

	Description	Compliance
1	Introduction
2	Description conventions
3	Abstract syntax description
3.1	TC-Messages	Full
3.2	Dialogue portion
3.2.1	Structured dialogue	Full
3.2.2	Unstructured dialogue	Full
4	Message representation	Full
4.1	Encoding rules
4.1.1	Specification of encoding rules	Full
4.1.2	Overview of encoding rules	Full
4.1.3	Transmission order	Full
4.2	Message encoding	Full
4.2.1	Transaction Portion	Full
4.2.2	Component Portion	Full
4.2.3	Dialogue Portion	Full

Description

Compliance

Notes

Introduction

Description conventions

Abstract syntax description

3.1

TC-Messages

Full

3.2

Dialogue portion

3.2.1

Structured dialogue

Full

3.2.2

Unstructured dialogue

Full

Message representation

Full

4.1

Encoding rules

4.1.1

Specification of encoding rules

Full

4.1.2

Overview of encoding rules

Full

4.1.3

Transmission order

Full

4.2

Message encoding

Full

4.2.1

Transaction Portion

Full

4.2.2

Component Portion

Full

4.2.3

Dialogue Portion

Full

TCAP Q.774 - Transactions Capabilities and Procedures

Empty cells are descriptive text only

	Description	Compliance
1	Introduction
1.1	Basic guideline	Full
1.2	Overview
2	Addressing	Full
3	Transaction capabilities based on a connectionless network service
3.1	Sub-layering in TCAP	Full
3.2	Component sub-layer procedures	Full
3.2.1	Normal procedure
3.2.1.1	Component handling procedure
3.2.1.1.1	Mapping of TC component handling service primitives to component types	Full
3.2.1.1.2	Management of invoke IDs	Full
3.2.1.1.3	Operation classes	Full
3.2.1.1.4	Sample component flows
3.2.1.2	Dialogue control via TC primitives	Full
3.2.2	Abnormal procedures
3.2.2.1	Dialogue control	Full
3.2.2.2	Abnormal procedures relating to operations	Full
3.2.3	Compatibility issues	Full
3.3	Transaction sub-layer procedures
3.3.1	General	Full
3.3.2	Mapping of TR service primitives to message types	Full
3.3.3	Normal procedures	Full
3.3.3.1.1	Actions of the sending end	Full
3.3.3.1.2	Actions of the receiving end	Full
3.3.3.2	Message transfer within a transaction
3.3.3.2.1	Transaction begin
3.3.3.2.1.1	Actions of the initiating end	Full
3.3.3.2.1.2	Actions of the receiving end	Full
3.3.3.2.2	Transaction continuation	Full
3.3.3.2.3	Transaction termination	Full
3.3.3.2.4	Abort by the TR-user	Full
3.3.3.2.5	Example of message exchange
3.3.3.2.6	Transaction state transition diagrams	Full
3.3.4	Abnormal procedures relating to transaction control	Full

Description

Compliance

Notes

Introduction

1.1

Basic guideline

Full

1.2

Overview

Addressing

Full

Transaction capabilities based on a connectionless network service

3.1

Sub-layering in TCAP

Full

3.2

Component sub-layer procedures

Full

3.2.1

Normal procedure

3.2.1.1

Component handling procedure

3.2.1.1.1

Mapping of TC component handling service primitives to component types

Full

3.2.1.1.2

Management of invoke IDs

Full

3.2.1.1.3

Operation classes

Full

3.2.1.1.4

Sample component flows

3.2.1.2

Dialogue control via TC primitives

Full

3.2.2

Abnormal procedures

3.2.2.1

Dialogue control

Full

3.2.2.2

Abnormal procedures relating to operations

Full

3.2.3

Compatibility issues

Full

3.3

Transaction sub-layer procedures

3.3.1

General

Full

3.3.2

Mapping of TR service primitives to message types

Full

3.3.3

Normal procedures

Full

3.3.3.1.1

Actions of the sending end

Full

3.3.3.1.2

Actions of the receiving end

Full

3.3.3.2

Message transfer within a transaction

3.3.3.2.1

Transaction begin

3.3.3.2.1.1

Actions of the initiating end

Full

3.3.3.2.1.2

Actions of the receiving end

Full

3.3.3.2.2

Transaction continuation

Full

3.3.3.2.3

Transaction termination

Full

3.3.3.2.4

Abort by the TR-user

Full

3.3.3.2.5

Example of message exchange

3.3.3.2.6

Transaction state transition diagrams

Full

3.3.4

Abnormal procedures relating to transaction control

Full