static TriggerType |
TriggerType.CHANGE_IN_LOCATION |
This value is used to indicate that a change in the end user location shall cause the credit control client to ask for a re- authorisation of the associated quota.
|
static TriggerType |
TriggerType.CHANGE_IN_QOS |
This value is used to indicate that a change in the end user negotiated QoS shall cause the credit control client to ask for a re- authorisation of the associated quota.
|
static TriggerType |
TriggerType.CHANGE_IN_RAT |
This value is used to indicate that a change in the radio access technology shall cause the credit control client to ask for a re- authorisation of the associated quota.
|
static TriggerType |
TriggerType.CHANGE_IN_SERVICE_CONDITION |
This value is used to indicate that a change in rating conditions associated with a service occurs.
|
static TriggerType |
TriggerType.CHANGE_IN_SERVING_NODE |
This value is used to indicate that a change in serving node shall cause the credit control client to ask for a re-authorisation of the associated quota.
|
static TriggerType |
TriggerType.CHANGE_IN_SGSN_IP_ADDRESS |
This value is used to indicate that a change in the SGSN IP address shall cause the credit control client to ask for a re-authorisation of the associated quota.
|
static TriggerType |
TriggerType.CHANGE_IN_USER_PARTICIPATING_TYPE |
This value is used specifically to indicate that a change in the user participating type within a session shall cause the credit control client to ask for a re-authorisation of the associated quota.
|
static TriggerType |
TriggerType.CHANGEINLOCATION_CellId |
This value is used to indicate that a change in the Cell Identity where the end user is located shall cause the credit control client to ask for a re-authorisation of the associated quota.
|
static TriggerType |
TriggerType.CHANGEINLOCATION_LAC |
This value is used to indicate that a change in the LAC where the end user is located shall cause the credit control client to ask for a re-authorisation of the associated quota.
|
static TriggerType |
TriggerType.CHANGEINLOCATION_MCC |
This value is used to indicate that a change in the MCC of the serving network shall cause the credit control client to ask for a re-authorisation of the associated quota.
|
static TriggerType |
TriggerType.CHANGEINLOCATION_MNC |
This value is used to indicate that a change in the MNC of the serving network shall cause the credit control client to ask for a re-authorisation of the associated quota.
|
static TriggerType |
TriggerType.CHANGEINLOCATION_RAC |
This value is used to indicate that a change in the RAC where the end user is located shall cause the credit control client to ask for a re-authorisation of the associated quota.
|
static TriggerType |
TriggerType.CHANGEINPARTICIPANTS_Number |
This value is used specifically for PoC to indicate that a change in the number of active participants within a PoC session shall cause the credit control client to ask for a re-authorisation of the associated quota.
|
static TriggerType |
TriggerType.CHANGEINQOS_DELAY_CLASS |
This value is used to indicate that a change in the end user negotiated delay class shall cause the credit control client to ask for a re-authorisation of the associated quota.
|
static TriggerType |
TriggerType.CHANGEINQOS_GUARANTEED_BIT_RATE_FOR_DOWNLINK |
This value is used to indicate that a change in the end user negotiated downlink guaranteed bit rate shall cause the credit control client to ask for a re-authorisation of the associated quota.
|
static TriggerType |
TriggerType.CHANGEINQOS_GUARANTEED_BIT_RATE_FOR_UPLINK |
This value is used to indicate that a change in the end user negotiated uplink guaranteed bit rate shall cause the credit control client to ask for a re-authorisation of the associated quota.
|
static TriggerType |
TriggerType.CHANGEINQOS_MAXIMUM_BIT_RATE_FOR_DOWNLINK |
This value is used to indicate that a change in the end user negotiated downlink maximum bit rate shall cause the credit control client to ask for a re-authorisation of the associated quota.
|
static TriggerType |
TriggerType.CHANGEINQOS_MAXIMUM_BIT_RATE_FOR_UPLINK |
This value is used to indicate that a change in the end user negotiated uplink maximum bit rate shall cause the credit control client to ask for a re-authorisation of the associated quota.
|
static TriggerType |
TriggerType.CHANGEINQOS_MEAN_THROUGHPUT |
This value is used to indicate that a change in the end user negotiated mean throughput shall cause the credit control client to ask for a re-authorisation of the associated quota.
|
static TriggerType |
TriggerType.CHANGEINQOS_PEAK_THROUGHPUT |
This value is used to indicate that a change in the end user negotiated peak throughput shall cause the credit control client to ask for a re-authorisation of the associated quota.
|
static TriggerType |
TriggerType.CHANGEINQOS_PRECEDENCE_CLASS |
This value is used to indicate that a change in the end user negotiated precedence class shall cause the credit control client to ask for a re-authorisation of the associated quota.
|
static TriggerType |
TriggerType.CHANGEINQOS_RELIABILITY_CLASS |
This value is used to indicate that a change in the end user negotiated reliability class shall cause the credit control client to ask for a re-authorisation of the associated quota.
|
static TriggerType |
TriggerType.CHANGEINQOS_RESIDUAL_BER |
This value is used to indicate that a change in the end user negotiated residual BER shall cause the credit control client to ask for a re-authorisation of the associated quota.
|
static TriggerType |
TriggerType.CHANGEINQOS_SDU_ERROR_RATIO |
This value is used to indicate that a change in the end user negotiated SDU error ratio shall cause the credit control client to ask for a re-authorisation of the associated quota.
|
static TriggerType |
TriggerType.CHANGEINQOS_TRAFFIC_CLASS |
This value is used to indicate that a change in the end user negotiated traffic class shall cause the credit control client to ask for a re-authorisation of the associated quota.
|
static TriggerType |
TriggerType.CHANGEINQOS_TRAFFIC_HANDLING_PRIORITY |
This value is used to indicate that a change in the end user negotiated traffic handling priority shall cause the credit control client to ask for a re-authorisation of the associated quota.
|
static TriggerType |
TriggerType.CHANGEINQOS_TRANSFER_DELAY |
This value is used to indicate that a change in the end user negotiated transfer delay shall cause the credit control client to ask for a re-authorisation of the associated quota.
|
static TriggerType |
TriggerType.CHANGEINTHRSHLDOFPARTICIPANTS_Number |
This value is used specifically to indicate that a change in the threshold of participants number within a session shall cause the credit control client to ask for a re-authorisation of the associated quota.
|