public static final class BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem extends AbstractLazyEncodedNamedInteger<BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem.EncodedValue>
The API offered by this class is as if the type were specified in ASN.1 as follows.
Modem ::= SEQUENCE { duplexMode DuplexMode, modemType ModemType }The class takes care of encoding the field values into a NamedInteger and decoding field values from a NamedInteger, the encoded representation being as tabulated below.
Data Encoding - based on ITU-T Q.931 (05/98) §4.5.5 p58 | ||||||||
---|---|---|---|---|---|---|---|---|
8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | |
Octet 5d | ext. 1 | Duplex mode | Modem type |
Modifier and Type | Class and Description |
---|---|
static class |
BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem.DuplexMode
Enumeration of ITU-T Duplex Mode constants.
|
static class |
BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem.EncodedValue
Representation of Modem values as NamedIntegers.
|
static class |
BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem.ModemType
ITU-T Modem Type constants.
|
isDecoded
encoded
FIELD_ABSENT, FIELD_UNINITIALISED
Modifier and Type | Method and Description |
---|---|
void |
checkFieldsSet()
Checks that all mandatory fields are present.
|
BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem |
clone()
Constructs a copy of this object and everything reachable from it.
|
static BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem |
copyOf(BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem from)
Creates a new object of this type, cloning the values of common fields from the given object of any subclass of the same base type.
|
protected void |
decode()
Computes the decoded form from the encoded form.
|
protected void |
encode()
Computes the encoded form from the decoded form.
|
protected boolean |
encodedIsInvalid()
Determines whether the encoded form is invalid.
|
protected BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem.EncodedValue |
fromValue(int value)
Converts an int to a NamedInteger.
|
byte[] |
getByteArrayForm()
Gets the byte array encoded form.
|
BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem.DuplexMode |
getDuplexMode()
Gets the value of half/full.
|
BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem.EncodedValue |
getEncodedForm()
Gets the encoded form.
|
static FieldAccessor[] |
getFieldAccessors()
Gets a new array of the accessors for fields of this type.
|
Map<String,Object> |
getFieldsMap(boolean withAbsents)
Gets a Map from field-name to field-value for the fields of a sequence.
|
BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem.ModemType |
getModemType()
Gets the value of the modem type.
|
boolean |
hasDuplexMode()
Tests whether the field DuplexMode has a value.
|
boolean |
hasModemType()
Tests whether the field ModemType has a value.
|
BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem |
setDuplexMode(BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem.DuplexMode value)
Sets the value of half/full.
|
BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem |
setModemType(BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem.ModemType value)
Sets the value of the modem type.
|
void |
toStream(DataOutput out)
Serializes this object to a stream in a form suitable for reading by
BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem(DataInput) . |
checkDecode, checkModifyAndDecode
equals, hashCode, toString
checkModify, isReadOnly, setReadOnly
public BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem()
public BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem(byte[] data)
data
- network-encoded dataNullPointerException
- if data is nullpublic BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem(byte[] data, int start, int len)
start
and is len
bytes long.
The data is not decoded and might not be decodable.data
- network-encoded datastart
- starting offset of network-encoded data in byte arraylen
- default length if not predictableNullPointerException
- if data is nullIllegalArgumentException
- if len is negativepublic BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem(BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem.DuplexMode duplexMode, BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem.ModemType modemType)
duplexMode
- half/fullmodemType
- the modem typepublic BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem(int arg)
arg
- intpublic BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem(DataInput in) throws IOException
toStream(DataOutput)
.in
- the stream to read fromEOFException
- if reading is pre-empted by end-of-fileIOException
- if the data cannot be readpublic void toStream(DataOutput out) throws IOException
BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem(DataInput)
.out
- the stream to write toIOException
- if an I/O error occurspublic boolean hasDuplexMode() throws DecodeException
DecodeException
- if encoded state cannot be decodedpublic boolean hasModemType() throws DecodeException
DecodeException
- if encoded state cannot be decodedpublic void checkFieldsSet() throws EncodeException
checkFieldsSet
in class AbstractLazyEncodedDataObject<BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem.EncodedValue>
EncodeException
- if any mandatory field is not presentpublic BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem.DuplexMode getDuplexMode() throws DecodeException
DecodeException
- if encoded state cannot be decodedpublic BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem.ModemType getModemType() throws DecodeException
DecodeException
- if encoded state cannot be decodedpublic BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem setDuplexMode(BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem.DuplexMode value) throws IllegalStateException
value
- DuplexMode representation of half/fullIllegalStateException
public BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem setModemType(BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem.ModemType value) throws IllegalStateException
value
- ModemType representation of the modem typeIllegalStateException
public static BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem copyOf(BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem from)
from
- the object from which to copypublic BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem clone()
clone
in interface DataObject
clone
in class AbstractDataObject
public static FieldAccessor[] getFieldAccessors()
public Map<String,Object> getFieldsMap(boolean withAbsents)
getFieldsMap
in class AbstractFieldsObject
withAbsents
- whether to put absent optional fields into Mapprotected boolean encodedIsInvalid()
public BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem.EncodedValue getEncodedForm() throws EncodeException
EncodeException
- if encoding failspublic byte[] getByteArrayForm() throws EncodeException
EncodeException
- if encoding failsprotected BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem.EncodedValue fromValue(int value)
fromValue
in class AbstractLazyEncodedNamedInteger<BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem.EncodedValue>
value
- intprotected void encode() throws EncodeException
encode
in class AbstractLazyEncodedDataObject<BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem.EncodedValue>
EncodeException
- if encoding failsprotected void decode() throws DecodeException
decode
in class AbstractLazyEncodedDataObject<BearerCapability.ITU_T.Layer1Capability.Details.ParityAndModem.Modem.EncodedValue>
DecodeException
- if decoding fails