public final class BearerCapability extends AbstractLazyEncodedByteArray implements FastSerializable
The API offered by this class is as if the type were specified in ASN.1 as follows.
BearerCapability ::= CHOICE { iTU_T ITU_T, iSO_IEC OCTET STRING, national OCTET STRING, network OCTET STRING }The class takes care of encoding the field values into a byte-array and decoding field values from a byte-array, the encoded representation being as tabulated below.
Data Encoding - based on ITU-T Q.931 (05/98) §4.5.5 p58 and a comment in Ericsson-INAP-CS1-Datatypes.asn | |||||||||
---|---|---|---|---|---|---|---|---|---|
8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | ||
Coding standard discriminates... | |||||||||
Case ITU_T | Octet 3 | ext. 1 | 0 0 | ITU_T-encoded data | |||||
Octets 4.. | ITU_T-encoded data | ||||||||
case ISO_IEC | Octet 3 | ext. 1 | 0 1 | ISO_IEC-encoded data | |||||
Octets 4.. | ISO_IEC-encoded data | ||||||||
case National | Octet 3 | ext. 1 | 1 0 | National-encoded data | |||||
Octets 4.. | National-encoded data | ||||||||
case Network | Octet 3 | ext. 1 | 1 1 | Network-encoded data | |||||
Octets 4.. | Network-encoded data |
Modifier and Type | Class and Description |
---|---|
static class |
BearerCapability.Choice
Enumeration of discriminating values.
|
static class |
BearerCapability.ITU_T
Class ITU_T indicates a requested bearer service to be provided by the network,
coded in ITU_T format.
|
isDecoded
encoded
FIELD_ABSENT, FIELD_UNINITIALISED
Constructor and Description |
---|
BearerCapability()
Constructs a new BearerCapability object with no fields set.
|
BearerCapability(byte[] data)
Constructs a new BearerCapability object from network-encoded data.
|
BearerCapability(byte[] data,
int start,
int len)
Constructs a new BearerCapability object from part of network-encoded data.
|
BearerCapability(DataInput in)
Constructs a new BearerCapability object from data deserialized from a stream that was written by
toStream(DataOutput) . |
Modifier and Type | Method and Description |
---|---|
void |
checkFieldsSet()
Checks that all mandatory fields are present.
|
BearerCapability |
clone()
Constructs a copy of this object and everything reachable from it.
|
static BearerCapability |
copyOf(BearerCapability from)
Creates a new object of this type, cloning the values of common fields from the given object of any subclass of the same base type.
|
protected void |
decode()
Computes the decoded form from the encoded form.
|
protected void |
encode()
Computes the encoded form from the decoded form.
|
protected boolean |
encodedIsInvalid()
Determines whether the encoded form is invalid.
|
BearerCapability.Choice |
getChoice()
Gets the discriminant for which choice is chosen.
|
static int |
getContainedLength(byte[] data,
int start,
int len)
Determines the length of the encoded value that commences at offset
start in the given data . |
byte[] |
getEncodedForm()
Gets the encoded form.
|
static FieldAccessor[] |
getFieldAccessors()
Gets a new array of the accessors for fields of this type.
|
Map<String,Object> |
getFieldsMap(boolean withAbsents)
Gets a Map from :discriminant-name to field-value.
|
byte[] |
getISO_IEC()
Gets the value of the ISO_IEC coding standard.
|
BearerCapability.ITU_T |
getITU_T()
Gets the value of the ITU_T coding standard.
|
byte[] |
getNational()
Gets the value of the National coding standard.
|
byte[] |
getNetwork()
Gets the value of the Network coding standard.
|
boolean |
isISO_IECChosen()
Tests whether the choice is iSO_IEC.
|
boolean |
isITU_TChosen()
Tests whether the choice is iTU_T.
|
boolean |
isNationalChosen()
Tests whether the choice is national.
|
boolean |
isNetworkChosen()
Tests whether the choice is network.
|
BearerCapability |
setISO_IEC(byte[] value)
Sets the value of the ISO_IEC coding standard.
|
BearerCapability |
setITU_T(BearerCapability.ITU_T value)
Sets the value of the ITU_T coding standard.
|
BearerCapability |
setNational(byte[] value)
Sets the value of the National coding standard.
|
BearerCapability |
setNetwork(byte[] value)
Sets the value of the Network coding standard.
|
void |
toStream(DataOutput out)
Serializes this object to a stream in a form suitable for reading by
BearerCapability(DataInput) . |
checkDecode, checkModifyAndDecode
equals, hashCode, toString
checkModify, isReadOnly, setReadOnly
public BearerCapability()
public BearerCapability(byte[] data)
data
- network-encoded dataNullPointerException
- if data is nullpublic BearerCapability(byte[] data, int start, int len)
start
and is len
bytes long.
The data is not decoded and might not be decodable.data
- network-encoded datastart
- starting offset of network-encoded data in byte arraylen
- default length if not predictableNullPointerException
- if data is nullIllegalArgumentException
- if len is negativepublic BearerCapability(DataInput in) throws IOException
toStream(DataOutput)
.in
- the stream to read fromEOFException
- if reading is pre-empted by end-of-fileIOException
- if the data cannot be readpublic void toStream(DataOutput out) throws IOException
BearerCapability(DataInput)
.toStream
in interface FastSerializable
out
- the stream to write toIOException
- if an I/O error occurspublic BearerCapability.Choice getChoice() throws DecodeException
DecodeException
- if encoded state cannot be decodedpublic boolean isITU_TChosen() throws DecodeException
DecodeException
- if encoded state cannot be decodedpublic boolean isISO_IECChosen() throws DecodeException
DecodeException
- if encoded state cannot be decodedpublic boolean isNationalChosen() throws DecodeException
DecodeException
- if encoded state cannot be decodedpublic boolean isNetworkChosen() throws DecodeException
DecodeException
- if encoded state cannot be decodedpublic void checkFieldsSet() throws EncodeException
checkFieldsSet
in class AbstractLazyEncodedDataObject<byte[]>
EncodeException
- if any mandatory field is not presentpublic BearerCapability.ITU_T getITU_T() throws DecodeException
DecodeException
- if encoded state cannot be decodedpublic byte[] getISO_IEC() throws DecodeException
DecodeException
- if encoded state cannot be decodedpublic byte[] getNational() throws DecodeException
DecodeException
- if encoded state cannot be decodedpublic byte[] getNetwork() throws DecodeException
DecodeException
- if encoded state cannot be decodedpublic BearerCapability setITU_T(BearerCapability.ITU_T value) throws IllegalStateException
value
- ITU_T representation of the ITU_T coding standardIllegalStateException
public BearerCapability setISO_IEC(byte[] value) throws IllegalStateException
value
- byte[] representation of the ISO_IEC coding standardIllegalStateException
public BearerCapability setNational(byte[] value) throws IllegalStateException
value
- byte[] representation of the National coding standardIllegalStateException
public BearerCapability setNetwork(byte[] value) throws IllegalStateException
value
- byte[] representation of the Network coding standardIllegalStateException
public static BearerCapability copyOf(BearerCapability from)
from
- the object from which to copypublic BearerCapability clone()
clone
in interface DataObject
clone
in class AbstractDataObject
public static FieldAccessor[] getFieldAccessors()
public Map<String,Object> getFieldsMap(boolean withAbsents)
getFieldsMap
in class AbstractFieldsObject
withAbsents
- the value of this parameter is ignoredprotected boolean encodedIsInvalid()
public byte[] getEncodedForm() throws EncodeException
EncodeException
- if encoding failspublic static int getContainedLength(byte[] data, int start, int len)
start
in the given data
.
The value is not fully decoded and might not be decodable.
If the encoded value ends with a filling field,
then the given len
is returned.
If the encoded value is so currupt that its length cannot be determined,
then 0
is returned.data
- network-encoded datastart
- index into data where value commenceslen
- length in data to be consideredNullPointerException
- if data is nullprotected void encode() throws EncodeException
encode
in class AbstractLazyEncodedDataObject<byte[]>
EncodeException
- if choice does not match already encoded coding standardprotected void decode() throws DecodeException
decode
in class AbstractLazyEncodedDataObject<byte[]>
DecodeException
- if too few or too many octets to be decoded